Epson l120 both blinking lights solution

Epson l120 blinking both lights
Note: same problem error could be different causing errors so this video might not work for you but works for others. Check my other videos
Song: Markvard - Desire (Vlog No Copyright Music)
Music provided by Vlog No Copyright Music. Video Link: • Markvard - Desire (Vlo...
donate paypal: [e-mail]
What to help?
Donate :
gcash :09260363503
Coins : 09260363503
Paymaya : 09260363503

[@janryvictornarvaez9532]

I've watched a lot of videos on how to solve fixed jammed cartridge, and you were the only one who managed to helped me. Thanks a lot.

[@wayneslink]

Welcome and thanks 👍❤️

[@lizzye9795]

Thank you for this tutorial. I didn't need to remove the cover, I just needed to adjust the lever from the back by reaching for it. Thank you.

[@kennethlingad]

pangalawang beses na ko bumalik dito, and this method works pa rin. HAHAh i had the same problem from last year

[@LexzCleaningSuppliesTrading]

Thanks for this tutorial video grabe it really works nag stuck up ung printer ko . ngayon gumana na ulit yehey , Much Appreciated for this kind of video salamat po sa inyong tulong . God Bless po

[@JustinePanela]

Sobrang laking tulong. Nakailang reset na ako sa wastepad counter ko. Eto lang pala solusyon. Thank you.

[@chriselle6223]

Thank you so much po sa video ninyo, napakalaking tulong, ang dami kong napanood na video naka-6 ako pero after kong magawa lahat nang itinuro nila hindi pa rin nag-ok ang printer ko, not the fix na applicable sakin pero ito pong sa inyo ang same case ng sa akin. Buti hindi ako nag-give up sa pagreresearch dito sa YT. More power po sa inyo. Dahil dyan nag-subscribe po ako hehe. God bless.

[@wayneslink]

Salamat po

[@angelloup.capuyan5998]

may God bless you,sir. ❤️ My printer is working now. May He pour out more blessings in you! God bless

[@wayneslink]

Welcome po. 😊 God bless din

[@johnshanecocjin9196]

thank you so much po sa video nyo sir.. naka save po ako ng 600. ganito lang pala ang solusyon sa dati kong pagpaayos ng printer.. dati 600 talaga ang singil nila sa akin, ito lang naman ang problema noon. thankyou ulit. God bless po..

[@roychavez2514]

Maraming salamat kuya.. na ayus ko yung printer ..🙏🙏😍😊 God bless po...

[@wayneslink]

Welcome po don't forget to like and subscribe 😊👍

[@jpriver4]

Naayos ko yung printer dahil dito keep uploading godbless boss👏👏👏

[@norjaneshamakil2105]

Ganitong ganito yung nnangyari sa printer ko ngaun. Naglock din cartridge nea after nea mag papaer jam. I hope maayos ko to through sa panonood ng video mo. Thanks Sir!😊

[@miriamreaalcodia2070]

Ang galing. The best po.. Naayos ang printer. Very informative

[@wayneslink]

Nice.. 😊

[@GeronimoJr.Bactol-e7z]

maraming salamat boss....akala tuloyan ng masira, samalat boss sana maraming kapng matutulungan kagaya ko....God bless po

[@kabanph9829]

Thank you, Sir I fixed my L120. God bless po.

[@hannaworld665]

Thank you po ang laking tulong di na ako gumastos sa pagpaparepair 😊

[@wayneslink]

Welcome po

[@sevgonzales1660]

Thank you po sir. Malaking tulong po pag upload nio sa ng video na to.. more power pa po sa nio.. GOD BLESS

[@wayneslink]

Welcome po and salamat din sa pag watch 😊👍

[@jhielhouazuela9880]

Thank u so much..ok na ulit printer ko..napakadaling sundan👍👍👍

[@wayneslink]

Nice. Don't forget to like and subscribe mga lods

[@Priviesoria]

Thank you so much for this tutorial, ang dami kong nakita pero sayo lng tlga naayos printer ko..

[@wayneslink]

salamat po

[@renlyalabata9636]

You're a lifesaver. Only your video works ❤️❤️❤️ Y

[@rccttagum4965]

Thanks to this vlog po. Very helpful po sya sobra. Nagamit ko po itong vlog ngayon po talaga. Hindi ko lang po na Video kasi mag isa lang ako. God Bless po.

[@wayneslink]

Welcome po, don't forget to like and subscribe for more updates 😊👍 and congratulations

[@marjconcemino4869]

thank you so much for the info...

[@louiecarreon8846]

Salamat kayo ani nga video nimo bai! ang lever gyud diay, naa ayo ra akong printer. God bless!

[@wayneslink]

nice bai

[@jeffreyemmanuelison5024]

Hay salamat lodi kala ko d nko mkkpagprint ng modules ng mga bata ko. Salute

[@jimmybenitez9752]

Thank you so much, nakapag ayos Ako NG printer NG walang binayadan... salamat po

[@reneechristinemariebarcoma716]

Thank you so much po! Naka save ako ng money dahil dito sa video niyo ❤️

[@wayneslink]

Welcome and thanks for watching, don't forget to like and subscribe for more updates

[@susiecruz1481]

Maraming salamat po! Pagpalain ka po ng Maykapal. 🙏

[@sophiafuentes9749]

waaaa thank youuuu!!! after how many videos, this is the one helped me fix my printer hahahahahaha thank youuuuuu so much!!!❤️❤️❤️

[@wayneslink]

Welcome po don't forget to like and subscribe

[@ristiemarfil6722]

Thanks po , dadalhin ko pa sana unit ko sa binilhan ko kasi may warranty pa , pero salamat nakita ko to , working na ulit printer ko , God bless po...

[@wayneslink]

Welcome po, don't forget to like and subscribe for more 👍😊

[@richelmaghinay6681]

Thank you so much! Done resetting and all. Only this one made my printer work again! Yesssss! God bless you..

[@wayneslink]

Welcome po, don't forget to like and subscribe for more updates 😊👍

[@rodelnapao5822]

Thank yo so much sir! Nalutas rin yung problem ko. Kala ko no choice nah.. Sobrang Thank you po! God bless po!

[@wayneslink]

Welcome po don't forget to like and subscribe for more updates 👍😊

[@florifebaldoza69]

Thank you so much po.. Kahit pinagpawisan aq sa pag open nang printer kasi hirap buksan pero worth it namn.. 😊😁

[@wayneslink]

Congratulations po, don't forget to like and subscribe for more updates 😊

[@ElaiOrmesaJintalan]

Salamat po, same prob. Natakot ako ng pagpush ko ay malambot na akala ko dapat matigas pero nagtry na ako magprint, normal pala na yun. Salamat po makakatulog na ako ng maayos. No worries na. God bless po.

[@indaycindy9265]

Salamat po....ok na yong printer ko🥺💝Godbless po sa iyo😇 Merry Christmas and Advance Happy New Year 🎄🎉💝😇

[@wayneslink]

Welcome po. Merry Christmas and a happy new year din 😊🎄👍

[@adonisbornea3246]

Slamata poh sayu idol may natutunan ako god bless sa video mo..

[@louiegonzales1261]

Salamat po sir. Very helpful and informative.

[@janinetabalanza8494]

Thank you for sharing this sir👍such a great a help most especially for teachers who are printing modules now a days

[@wayneslink]

Welcome mam, 😊👍 Don't forget to like and subscribe

[@yurisachivlog9211]

Thanks buti nalang napanuod ko to ..bukas ko na kalikutin printer ko hehehe

[@armiejimenez4113]

Very helpful po ang video na to😊thank you so much po..

[@wayneslink]

Welcome po don't forget to like and subscribe 😊

[@mariaclarizacastillo8891]

It workssss!!!!!!! Saved time and money for labor. Thanks a lot!!!! You saved me.

[@wayneslink]

Glad it helps, don't forget to like and subscribe 🙏👍☺️

[@mariaclarizacastillo8891]

@@wayneslink done already 😊

[@mariaclarizacastillo8891]

Sir good am. Dalawa ung printer kong ganan ung naging problem, yung isa naayos ko gamit po itong video niyo. Pero ung isa nakalock din po ung cartridge pero nakababa naman ung lever nung binuksan ko. Pag ino on ko sya. Blinking red tas ndi nagalaw cartridge pero nakababa naman ang lever. Ano po kayang pede gawin. Salamat po

[@mariaclarizacastillo8891]

Pag inoon ko sya ndi rin naikot ang roller

[@wayneslink]

Anung klasing blinking mam? Alternate ba or simultaneous?

[@lynvicente7254]

Thank you so much, it works!!!!!! Saved time and money as well. God bless!!!

[@wayneslink]

Welcome ma'am, don't forget to like and subscribe for more updates 😊👍

[@awanishbarnwal9441]

Sir, initially it was locked, I put lever down. Now it's free but blinking still not going what has to be done? My cartridge still not moving automatically.

[@trinurcahyono2893]

Thank you my brother you save my works

[@dingdongtv8860]

Salamat sa Dios po. nakita ko ko video mo. Thank you po.

[@wayneslink]

Thanks and welcome sir. Consider subscribing to my channel po 😉👍🙏

[@dingdongtv8860]

@@wayneslink finish na po akong subscribe.

[@dingdongtv8860]

@@wayneslink may isang problema ako sir. pag mag start na syang mag print bumabalik po syang natatanggal? ano po ka dapat kung gawin?

[@wayneslink]

@@dingdongtv8860 anu ba ang natangal na bumalik?

[@vjanebaguio8360]

Wow! Such a big help. Daghang salamat!

[@wayneslink]

Welcome mam. Don't forget to like and subscribe

[@rascuison4982]

Thank you so much.. Got the same problem...solve na po 💕

[@wayneslink]

Nice, welcome dont forget to like and subscribe for more updates 😊

[@safezoneriders6356]

Thank you for simple tutorial... Good job.

[@wayneslink]

Welcome po, don't forget to like and subscribe for more 😘

[@budong333]

Salamat po sa idea kung paano mag ayos ng printer nato. God Bless po 🙂

[@wayneslink]

Welcome po, please consider subscribing foe more repair tricks , at the mean time may mga ibang videos pa ako jan madami ka makukuha na idea

[@fatimadave8492]

Thank you sir for this timely information.😊

[@wayneslink]

Always welcome

[@pmvictoria1214]

thank you so much sir! naayos ko po mag-isa ang printer ko :)

[@wayneslink]

Congratulations, and welcome, don't forget to like and subscribe for more updates 😊👍

[@Tartarugaterrestre85]

hello I have an epson wf7515, I unplugged the flat cable that powers the cartridge reading card with the printer on and it went into error. The display shows error turn off the printer without any code. How can I solve?

[@gladyschuchay3891]

Very helpful kuys. Thank you so much👌

[@wayneslink]

Welcome don’t forget to like and subscribe ❤️

[@Muhammadadnan-mx2tt]

love you for save my time

[@axellinan110]

Thank you very much, easy and fast works perfectly

[@wayneslink]

Welcome po. Don't forget to like and subscribe

[@shunga9908]

Thank you so much bro... Problem solve... God bless always

[@wayneslink]

Congrats bro, welcome, don't forget to like and subscribe for more updates 😊👍

[@cirllygicangao9281]

Thank You so much Sir, Godbless You!

[@wayneslink]

Welcome, don't forget to like and subscribe for more updates 😊👆

[@ayokdpogi]

Boss ..Salamat ..nice video po..

[@averyyt2659]

Thanks,, the only solution to my problem..

[@wayneslink]

Welcome po, please consider subscribing to my channel sir😊

[@michaeljohnabriol5862]

Thanks bro. It helps me a lot. God Blessed you.

[@wayneslink]

Welcome bro 👍😊

[@rayre6450]

Maraming salamat po ❤❤❤❤

[@diannedeguzman9091]

.. yey thank you for this simple tutorial im done and its working now yehey ..

[@wayneslink]

Congratulations. ☺️ Don't forget to like and subscribe 🙏👍

[@joviepanlaan5451]

the best, gumana po yong printer ko, salamat poooo talaga

[@wayneslink]

Welcome po don't forget to like and subscribe

[@carmellesalas4416]

Thank you Sir. God bless.

[@wayneslink]

Welcome po don't forget to like and subscribe 👍😊

[@xiaoiamz6096]

Thanks sir. Worked perfectly.

[@wayneslink]

Welcome po, don't forget to like and subscribe for more updates 👍

[@mangjose4867]

Thanks! Life saver!

[@ronaldonugal9651]

thanks a lot my printer is back on line again God bless

[@wayneslink]

Welcome sir, don't forget to like and subscribe for more updates 😊👍

[@devlyngarillo9527]

Thank you so much! Ang galing😭😍❤️❤️❤️❤️❤️

[@wayneslink]

Welcome po, don't forget to like and subscribe for more updates 👍😊

[@necamique841]

Thank you Master😁😁😁

[@guillermohumphreygailp.8268]

this was very helpful thanks a lot!!!

[@lorenasilva3896]

this video es gold, thank you so much

[@wayneslink]

You're very welcome!

[@eriksonquintana2484]

Thank you a lot!

[@rheadiadula1179]

Thank you so much! your video really helps a lot

[@mhdnhorbangasin4809]

Thank you sir , this was very helpful

[@jaypeeebron547]

Thanks a lot! I fixed mine!😊

[@wayneslink]

Great

[@LasershowLab]

the lever is in right position but still having fatal error what are other causes?

[@wayneslink]

Check my other videos related i habe lots of tuts

[@joywael8892]

Thank you so much.. this is a big help..

[@KuyaYo1998]

THANK YOU SO MAATSS...🥰🥰🥰❤️❤️❤️

[@filanelrazo7956]

Thank you. It works

[@jeromerodriguez6201]

thanks a lot sir. it saves us.

[@honneylore7952]

Thank you very much! God bless

[@wayneslink]

Welcome po don't forget to like and subscribe for more updates 😊

[@ronyjunio6975]

Sir, 1 or 2 printouts tapos error na.paper jam.tapos kinakain papel di ngtutuloy magprint then paper jam.ano kaya cause nito?walang naipit na papel, ok na ung roller feeder.

[@wayneslink]

Pa clean ecoder strip muna

[@chumpyanez7800]

Thank you for this video

[@camillelause6636]

Thankyouu sir problem solve❤

[@dayanatolentino8337]

it works! thank u and God bless 😃

[@wayneslink]

Your comment is highly appreciated thank you 😊👍

[@jennirainaguilar3248]

Thank you so much❤❤.

[@fredilizavirtudazo6121]

Thank you it helps 😊

[@thopertz7852]

Thank you so much po

[@devlyngarillo9527]

Thank you so much! ❤️❤️

[@LotLatz25]

Thank very much so much big help

[@wayneslink]

Welcome po🙏👍

[@RenzDelbo]

Goodmorning sir, sinubukan ko po siya pero still the same, tanong ko lang sana kung ano po yung problema nung saken same brand lng din po epson L120 Simisipol po siya ng malakas tas both lights are blinking error din po siya Thankyou po

[@eu_v5576]

Thank you for sharing! Nakakaprint na ako ulit 😭

[@wayneslink]

Welcome po, don't forget to like and subscribe 😊

[@ronasumodio9842]

Sir Yung printer ko po nagsa-stock ung paper at cartridge s gitna. Hindi mklabas Yung papel.

[@arniloaman9577]

Sir baka matulungan mo ako sa 2 L120 printers ko. Ung isa lagi namisalign un print head lever lock. Both lights blinking same time. Kumpleto naman ung spring. Pag natulak sa dati na position ok na naman xa pero bumabalik din un same na sira. Ung no. 2 printer ko L120 din, ung margin sa unahan ng papel pag nagprint ay shorter by 1/8". Mejo malapit xa sa edge ng papel bandang unahan. Ibang sides no problem.. TY sa mga sasagot.

[@sayeedashrafmalali7210]

wow!!!! super big help!!!!!!

[@ohniearota4368]

thank you so much sir. great help

[@wayneslink]

Welcome don't forget to like and subscribe for more updates 😊🙏👍

[@alexisjohnalfar8442]

it worked! thanks

[@jeffreybautista5117]

Hello sir.After ko gawin nawala ung orangr blinking light. After nun nagtry ako ulit magprint pero misaligned ulit. Paulit ulit na ganun. Ano po kaya prob nun? Salamat

[@wayneslink]

Try mu gawin ulit at e manual rotation mu s gilid roller counterclockwise and clockwise

[@desireetipdas]

hi i gots this problem of mine.. my epson l120 moves 1/4 or half way and goes back to its place.. hjuhuhuh all technician dont know what to do .. they just returned it back to me

[@wayneslink]

Turn off printer, move head by rotating yhe gear left side to release lock. Once free to move find the place where posible stuck and if its hard to move check for foreign objects, if no foreign object then force head to move until stuck is clear. Also check my l3110 stuck gear problem maybe it also can help. Same may apply on your l120

[@louisejennifer6379]

Super thank you po ♥️

[@wayneslink]

Welcome po 🙏👍

[@akiakiii5879]

Sir, What if I can move the cartridge? Ano po possible cause ng error?

[@wayneslink]

There are lots of things can cause blinking error. I have few videos you might want to check 1st.

[@justsmile6221]

Thanks you po! Godbless

[@wayneslink]

welcome po, dont forget to like and subscribe...

[@toyotanegrosoccidental3425]

Thankyou soo much for this video

[@wayneslink]

Welcome 😊☝️