Epson L120 /L121 Paper Jam Error / Epson L120 Blinking Red and Green | Permanent Solution 100%

This tutorial will help you fix the following Error: Epson Two Lights Blinking, paper jam error but no paper, printer won't feed paper, printer won't load paper, printer blinking red and green, and all error related to paper jam. Applicable to Epson L120, Epson L121, Epson L3210, Epson L3110, Epson L3150 and all Latest Epson Printers.

[@ErnestoVelasco-rv6ku]

My epson Printer's Spring is broken. This is the best way to fix it. Good job, my daughter was able to fix my printer with the help of this tutorial. Thank you.

[@user-bc7qd7mn1f]

wow, great job sir.

[@zigmaprintshop6532]

Glad I could help!

[@jirahmaejimenez2166]

spring po talaga napuputol sa loob?

[@marlosardena2457]

naayos namin printer with the help of this tutorial. Thank you.

[@SunRiseLPG]

The same case on our printer. Nagawa na namin dahil sa tutorial na ito. It really works. Thanks po.

[@user-bc7qd7mn1f]

natumbok ko rin ang tutorial na makakatulong para maayos ko printer ko. Natry ko na lahat, ito lang pala sira putol ang spring. Salamat.

[@zigmaprintshop6532]

Thank you for watching po. 😊

[@user-ve7gi5ee2d]

it works on our printer. This tutorial is very accurate. Thank you.

[@SunRiseLPG]

me too.

[@nikocacho]

Naayos ko na printer ko, Epson L121. No need Technician. Thanks a lot.

[@reybureros5875]

works like a magic bossss. 😍😍😍😍 salamat . kinalampag ko na ang gear e. kasi misplace daw. pero ganun parin.

[@zigmaprintshop6532]

Thank you sir. God bless. 😊

[@rezaarpociple6969]

We tried this in our office and we are able to fix our printer. Thanks! More videos po.

[@jimelyngapasinao3053]

it really works 100%. Di ko na kailangan dalhin sa service center.

[@zigmaprintshop6532]

Thank you mam.

[@EspinaPanada.official]

It works perfectly on my printer. Thank you sa tutorial na ito.

[@ArrianeLopez-ts7gf]

Finally found this tutorial. Works perfectly on my printer.

[@zigmaprintshop6532]

Glad it helped. Thank you for watching.

[@janetpaglinawan-ix9mb]

This tutorial saves my money and time. Hindi ko na kinailangan pang dalhin sa service center ang printer ko. :) Also works on Epson L121. nice job. keep it up!

[@dietherbinasofficial]

do you know what to do if the spring is not broken?

[@zigmaprintshop6532]

Glad we are able to help. 😊

[@jersonrama7781]

perfectly works on my L120. salamat.

[@GiannaElizJimenez]

Gumana sa wakas printer ko. :) salamat po.

[@teacherpie4819]

Ang galing! Solved na po. Gumagana na po ulit ang printer ko. Laking tulong ng video tutorial nyo po. Thank you. God bless po.🥰

[@jirahmaejimenez2166]

same here

[@AllanBoom-ov5wo]

This video tutorial is fantastic. Thanks!

[@zigmaprintshop6532]

Glad it was helpful!

[@rommelcruz3335]

Big help sir. Naayos ko printer namin dahil dito sa tutorial nyo. Big thumbs up.

[@zigmaprintshop6532]

Welcome po. Thank you for watching. :)

[@diyprinterrepair6840]

This tutorial helps us in our Printer Repair business. Very informative video.

[@marlosardena2457]

nice

[@zigmabranchtaas5036]

works perfectly right?

[@maricelmalinao2667]

nice one

[@richmondlaroa]

same with me. It really helps

[@SunRiseLPG]

location?

[@nonoy2598]

Idol maraming maraming salmat sa video mo na to malaking tulong to saakin naayos kuna po printer namin ❤️❤️❤️❤️ God bless you po idol ❤️❤️❤️❤️

[@richmondlaroa]

Very reliable. Gumana ang printer ko.

[@zigmaprintshop6532]

So Glad, our tutorial helps you.

[@ronaldcanielas1898]

This tutorial saves my money and time. Thank you.

[@rezaarpociple6969]

same with me.

[@rogerbanas9909]

laking tulong ng video mo sir! more power! godbless

[@zigmaprintshop6532]

Welcome po sir. We are glad that our tutorial was able to help you. God Bless. :)

[@jonelpronalin8785]

Legit solution, nakatulong talaga to sa office namin.

[@clairrygaming297]

Thank you very much

[@glaiziesmarketing4820]

It helps a lot. Thank you for sharing this! 😊

[@jennyabugadie4249]

It really works. Thanks for this tutorial.

[@zigmabranchtaas5036]

yaz

[@alonzojessicap.8519]

100% working. thanks

[@JohnGeraldVillanueva]

Very specific. Naayos ko agad printer namin. Salamat po boss.

[@gzmusic7091]

great job.

[@alexanderdejesus7969]

100% Working on my Epson Printer. Thank you bossing.

[@caproconstruction9343]

This tutorial helped our technician to fix our printer.

[@ronaldalla2471]

Good news.

[@romeoelma7666]

WHere is your office?

[@romeoelma7666]

How many printers you have?

[@cesarlumen7401]

Do you have office?

[@christineminton8350]

Thank you.. Your video really help me a lot..

[@zigmaprintshop6532]

Welcome po mam. We are glad that our tutorial was able to help you. God Bless. :)

[@jomarabeliana5117]

Best solution for paper jam error. nice job.

[@rinagayjocson193]

Thank u sir, for sharing this. We were able to fix our printer by following the steps in your video. More power po!

[@rhanelarcilla2746]

me too. :)

[@zigmaprintshop6532]

You are welcome

[@diyprinterrepair6840]

me too

[@nikocacho]

kami din po mam.

[@ZigmaFix]

good job

[@Jennyquinampay]

very specific, naayos na namin printer namin.

[@zigmaprintshop6532]

Thank you for watching.

[@learnandlovethephilippines]

Thanks for this tutorial. You're a blessing.

[@zigmaprintshop6532]

You're very welcome! ;)

[@ZigmaFix]

❤

[@maricelcastro8130]

Sinundan lang namin yung steps, naayos printer namin. Salamat po.

[@arlenebagundolcalaycay]

Thank you for this information

[@zigmaprintshop6532]

Welcome po mam.

[@HappyPill-tm4wd]

100% working on our printer.

[@zigmaprintshop6532]

Great 👍 thank you for watching

[@feberosediomla8199]

Thank you so much po..i was able to fix my printer..God bless po..

[@juanabarracoso4538]

100% Working on my printer. Thank you! :)

[@cesarlumen7401]

Are you using Epson Printer as well?

[@tricianuevo8247]

Madali lang pala sundin. salamat po.

[@romeoelma7666]

100% Working. Thanks for this video.

[@maddelacastro]

good job. works perfectly in my printer.

[@kuyashaw2564]

isa kang alamat.. ahahhhahah.. salamat, gumana sa printer.. magkano ba ang singilan pag ganyan bossing?

[@adccaliber45acp79]

Nice content. Works on my printer! Thank you bossing!

[@glaizadevera-jimenez567]

Works perfectly.

[@apriljohnpal3997]

I love your tutorial.

[@soclanddevelopmentcorporat6431]

Very helpful.. I love your tutorials..

[@harrycompetente4786]

same here. Do you have office?

[@cesarlumen7401]

Do you wish to buy a new one?

[@diyprinterrepair6840]

We can help if you need home service.

[@mariateresamacahilas7314]

Sir ang spring po ay nasa left side wala syang spring dyan sa center ako nakita

[@cathlentv2494]

thank you po sa tutorial it really works po 😊😊

[@zigmaprintshop6532]

Welcome po. God Bless.. :)

[@markaller5826]

nice sir nagawa ko printer ko

[@edisondeleon8272]

Very informative 😍... I like the content🎉 More videos pleasee

[@apriljohnpal3997]

Edison

[@ronaldalla2471]

Are you able to fix your printer as well?

[@ronaldalla2471]

keep watching

[@romeoelma7666]

Edison,

[@kristellucas6618]

edison

[@desireemartos829]

This tutorial really helps.

[@harrycompetente4786]

I Agree with you..

[@cesarlumen7401]

Are you using Epson or Canon?

[@kennethdcdslpt]

Thanks so much, I just fixed mine while following your video.

[@arnelquimado1358]

it also works on me. perfect.

[@gzmusic7091]

Same here

[@Virus_11-f]

thank you po.. such a great help..

[@ronaldcanielas1898]

hello mam

[@dionisobalsote7042]

100% working. Thanks man!

[@cesarlumen7401]

Do you have store?

[@johnortizo4418]

salamat po...

[@zigmaprintshop6532]

Welcome po mam. :)

[@clarkdemarucut9670]

salaamat po sa inyo. Godbless

[@mikemeneses7531]

try ko nga bossing.baka gumana rin sa printer ko.t.y.

[@dannelaguevarra9217]

Ty po ng madami

[@dietherbinasofficial]

What if the spring is not broken, what is the problem?

[@zigmaprintshop6532]

Please check the pickup roller. Need to change the rubber.

[@celestebacan3551]

thank u so much po.God bless

[@gzmusic7091]

So accurate. 💯

[@ramiesarsalejo9547]

Printer head sir mabasa sa ink possible ba masira or shorted? Ano pwde i punasan flex ribbon. Sana mapansin mo tanong ko ❤❤

[@gretelgolondrina]

Hello po... Okay lang ba yan gawin sa pinacontinuous ink na po?

[@zigmaprintshop6532]

yes. pwede po.

[@philipangelovalina7152]

THANKS VERY MUCH SIR

[@princessprincess765]

perfect! I was able to fix my printer.

[@wenalyngapasinao4821]

legit

[@wenalyngapasinao4821]

yes

[@wenalyngapasinao4821]

yeah men

[@rosannepaulette]

Paano po pag error pa rin pagkatapos magawa yung sinuggest nyo po?

[@maricelmolina4564]

Great Solution !

[@ronaldalla2471]

I agree with you mam

[@kristellucas6618]

very informative

[@arlenesison9644]

Thank you so much sr..

[@almasabado3502]

Legit solution, thanks

[@cesarlumen7401]

It really helps, great Job! :)

[@princessprincess765]

yes it is

[@mariabennethmangaoang9880]

legit gumana po sa printer ko.salamat po

[@teppyvlogs464]

Tinry ko po ito nakita ko na full black na po ung parang sponge po, pinapalitan po ba iyon?

[@ranelbustos7978]

Great job, I was able to fix my printer.

[@cesarlumen7401]

me too

[@sbrvidvalue]

SalamatzSomuch!!!

[@zigmaprintshop6532]

Welcome po. We are glad that our tutorial was able to help you. God Bless. :)

[@mildredjabagaton9054]

Thank you po 😊

[@BossEd15]

Boss thank you po keep safe 👊👊👊

[@mahraconcepcion2822]

ok lang po bang d tanggalin ung ink tank sir ?

[@HaruGaming_]

thanks

[@PhonesaTaas]

Paano po pag nawala ang spring? May nabibili po ba sainyo? Or sa shopee?

[@kingbinuya8870]

Ang galing.. :)

[@seraviki8790]

Thank you😊

[@jamesferrer8761]

Thank you sir....

[@jadhaa.5953]

Thank you !

[@biggetzytc8299]

Hello po, binalik niyo lang po ba yung may waste ink? Di niyo po ba tinanggal yun?

[@zigmaprintshop6532]

opo mam, binalik lang din po.

[@turquezalanz5706]

Sir bakit ganon nakapag palit naman ako ng maayos ng upper at bottom feeder pero nag e-error pa din siya ano po kaya problem niya. Salamat

[@madelsaulnier3174]

sir pano po kapag ok naman ung spring ng roller, pero pag nag piprint lagi tumatagilid ung papel or nagugusot ung papel, hindi po multiple feed

[@GZPrinting-OfficeAndSchoolSupp]

How to reset this printer?

[@user-zf9ph6is1z]

ito hinahanap ko.

[@laicadelacruz8482]

Uhm sa'kin po kasi kapag i-o-on is *ting ganon lang yung sounds e dapat mahaba yon diba... pa'no po yon? Red lang nag bblink tas green steady naman

[@antoniosamanosalubre5516]

Lods pano poba yong tapos na ngprint tapos mag reredlight agad pag pinatay mawala pg nag print ulit ng rered ulit

[@daniloescalante8674]

Paano po kaya kapag yung kain na papel printer ay hindi isa isa..nagdodoble doble na po..please notice me po thank u

[@ronaldalla2471]

I was able to fix my printer. Thanks :)

[@tricianuevo8247]

same here

[@galiciacyrilvong.3914]

Pano po sir pag sa kalagitnaan ng print nag paper jam

[@sucdadivinegrace1093]

thank you.

[@ronaldalla2471]

do you have printing business?

[@michellemaygullan4577]

Hi po... Ginawa ko na po yan pero nag.paper jam pa rin po sya? Ano po gagawin ko?

[@zigmaprintshop6532]

Please check the pickup roller. Baka pudpud na. Or baka need na ireset.

[@charlescalumba2872]

Awesome job

[@ronaldalla2471]

Do you have print shop?

[@cesarlumen7401]

Are you able to fix your printer?

[@cesarlumen7401]

Do you know "Princess"?

[@cesarlumen7401]

Princess

[@jhoanadizon6474]

Magaling na solusyon