Hi are you using the aliminum holders for the base of the actuators? My rig is slowly sliding on my floor and i wonder id that would help fix it
@Megahowler82Ай бұрын
Actually using some custom 3D printed feet to stop it from moving
@twistedbdo5755Ай бұрын
@Megahowler82 hi are you able to share this? I bought a 3d printer
@Rezamajedi2 ай бұрын
Do you get the gear change effect as well what's the feeling is like?
@Megahowler822 ай бұрын
Yeah its one of my favourite effects.. Can make it super violent as well
@TinoushGTR Жыл бұрын
Got the same. 😊
@popaconstantin20907 ай бұрын
Are any additional parts needed to indtall the RS MEGA+ on a rig like P1X?
@xHMProductionx5 ай бұрын
You would need additional 8040 rails on the bottom of it for the traction control, surge, etc. Only the motion is plug and play without any additional hardware.
@xHMProductionx5 ай бұрын
I know you sold the rig, but was there any significant lag that you noticed with it?
@Megahowler825 ай бұрын
None whatsoever... It was crazy responsive
@xHMProductionx5 ай бұрын
@@Megahowler82 you are not helping. I recently tried the d-box, but I felt it was laggy. I will pull the trigger and purchase 🤣. Thank you!
@Megahowler825 ай бұрын
@@xHMProductionx I genuinely regret selling my rig.. but kids just take up too much of my time right now.. I will definitely get another motion rig one day The Eracing kit can't be matched on price/performance
@Simlife101Ай бұрын
@@xHMProductionxif you thought D box was laggy this isn’t anywhere near as fast and I have it my self. Xbox was clearly not set up properly. The best for response time is Cubic systems.
@devintolliver923 ай бұрын
what kind of seat is that
@Megahowler823 ай бұрын
It was a SAAS Vortek. I don't recommend it though.. The seat bolsters gave up pretty quick and the backrest had alot of movement. I'm about to start building a new rig with triple 55" TVs if you want to follow along @BigBlokeGaming
@maciejkrz19807 ай бұрын
i see this very often, shouldn't your monitor be mounted to the rest of your rig and move with it?
@Megahowler827 ай бұрын
Personal preference... I don't feel monitors would last long been thrown around
@Simlife101Ай бұрын
@@Megahowler82I’ve had my attached for 2 years and no issues when you brace them correctly. I used sim labs adjustable feet 3 sets of them and bolted them to the profile my monitors attach to and put pressure on the back of the screens to remove any wobble.
@shervinaryan263111 ай бұрын
Hey what are your thoughts on the motion after 7 months? Any issues or faults?
@Megahowler8211 ай бұрын
Had kids and sold the rig.. But would always recommend the Eracing system.. It has improved alot since the model I bought and I never had a single issue.
@shervinaryan263111 ай бұрын
@@Megahowler82 thank you very much for the prompt response and congratulations! I'm sure you'll be right back in a rig in no time 👍
@elmalloc9 ай бұрын
why did you have kids damn!!! :(@@Megahowler82
@DerEli22 Жыл бұрын
hello , is this that Mega rs + ? What taxes did you pay in which country?
@Megahowler82 Жыл бұрын
Australia and I was lucky and avoided any addtional taxes
@elmalloc9 ай бұрын
I have contacted the government to inform them@@Megahowler82
@jawedouggade Жыл бұрын
Hello is it work on ps5 ?
@Megahowler82 Жыл бұрын
No. PC only
@ugalamadala6882 Жыл бұрын
It works with PS5 Gran Turismo 7. You need a separate PC (could be a small underpowered PC, e.g. NUC) to control the actuators and run sim racing studio software. Sim Racing Studio listens for telemetry data emitted by GT7 and controls the rig.
@Simlife101Ай бұрын
@@ugalamadala6882too much lag it’s been tested by my self and my brother.
@thierrybenedetto22526 ай бұрын
bonjour merci pour cette vidéo je vous écris de la Belgique quel matériels utiliser vous ? pour le châssis ? le siège ? les vibrations ? sur pc ? merci beaucoup vous savez mettre des liens ici pour votre matériel ? a combien cela reviens pour voir un peu merci beaucoup
@Megahowler826 ай бұрын
The rig is 160x40 extruded aluminium... More specifically the Trak Racer TR160 PC or monitors aren't mounted on the rig so vibrations aren't an issue