Alibaba virtual pinball table review part 1

[@marcosreyna2998]

try putting your monitor to "game mode" in the menu settings to get rid of the flipper delay. I did that on another pinball software and it fixed the delay. It might work for you

[@nidzdotnet76]

If you undo the plunger, you can snip the spring and it makes it easier to pull back.. I did that and makes it much better.

[@77machineman]

Did you end up upgrading this would like to see what progress you made or if you just abandoned it cheers

[@ThomasGrillo]

Very sorry you ran into those issues. For that price I would think there would be a 4k monitor, and higher end PC, graphics adapter, and drive in that beast. At least you didn't have to go through all the configuration nightmare, getting all the tables. Well, yeh, you did, once you started your new collection for the internal rebuild. LOL I hope all that went well. Thanks for sharing this.

[@mikeschannel-85]

I looked at alibaba and others but ended up going with primearcades’ machine…5 year warranty and ability to add future pinball packs! Made in USA…So stoked

[@esmeraldarodriguez7328]

Do they have reasonable prices?? Ive looked around USA arcade machine companies they run 7k and up 😱

[@lifewater989]

So basically a cabinet for $2800?

[@BillBene67]

I've ordered a virtual pinball machine from Alibaba. They are good quality actually and usually run $1,800 or so BUT you have to also factor in the shipping and multiple import fees/charges. That's where he comes up with the $2800. Usually takes about 4 weeks to arrive by sea but also takes about 30 days from the time you pay til it ships out

[@jpvanwoerden5215]

Hi, love the review. When will you release the video of the cabinet after all your additions and replacements?

[@WickedGamerCollector]

Delay is a shame, looks very good :0

[@HB-mj2jz]

I bought one from an importer last week and will get it delivered to my house this friday. It was 3000. It is the upgraded version with 1300 games, LED under playfield and inside speakers. Flashers and rgb led in the back and above the speakers. 10 solenoids, 2 contactors and a shaker engine. 42 inch playfield, 26 inch backglass and 17inch full dmd My plans are to use it as a base. Upgrade the videocard and change the playfield to a 43inch 144hz 4k one. It already has everything else. Maybe upgrade the pc later on. It is also locked down, but being a IT professional for 21 years that really isnt that big of an issue. There are ways around that ;)

[@charliescottmusic]

Howd u go?

[@SPKRFRKRMPLS]

got a link?

[@ShelbyBanditNFS]

Does it comes with the PC and screens? Can you send the link from where you bought it? Thanks

[@mikeschannel-85]

Did you every upgrade the speakers on this and if so, was it easy to do?

[@soma_rc]

Thanks a lot, clearly shows what to expect. I see local resellers also use these cabinets but seem to put in their own pc. I guess we won't get part 2? 🙂

[@TheKurtsPlaceChannel]

Very entertaining and fun to watch. Thanks for posting this.

[@bungalowfeuhler1541]

Oh my gosh! Is that an actual functioning coin door? I desperately want whatever vpin I finally settle on to be coin-op. I realize that I have the key. But I would limit myself to as many games as I can afford with the quarters in my pocket on any given night. That way I won’t get bored with it.

[@cliffordmaxwell9802]

Not sure if this will remedy the lag time on your flipper but you never know, I was looking into purchasing a PS4 pinball arcade game for my PS4 and in the comments section a person who had purchased the game mentioned the same type of lag time on the flippers ? A person chimed in on the comments section that he needed to set his TV to game mode and it would fix this lag time in the flippers? may be worth a try? good luck and thanks for doing the informative video.

[@boldoradrian]

Hi, i see the main screen is with dvi conection what about the led matrix and backglass .they are both in the same vga ?

[@frankyandnancy7070]

im trying to get the exact same machine as you have from alibaba , man what a headache with the company im dealing with just to get them to give me the proper invoice on what we agreed on i asked for a fully equipped pinball machine and they send me the invoice of a basic pinball machine , it kinda makes you wonder , anywaise where di you get your pinball machine and did you have problems like me ,and if not can you let me know where you purches yours thank you .

[@MrJaz8088]

Its A Zero Delay Encoder that run's your Buttons, from $6 and up, Some have LED Power on-board Popular for Arcade Machine Builds nowadays. I build a Mini Virtual Pinball - 27" Playfield & 21" Backglass , 2 screen's and have the Virtual DMD when need on the 2nd Monitor

[@MB-hl3mq]

Jaz808 how does one build one?

[@DannyRoos]

Thank you for the review, the cabinet looks cool, wonder if they sell it without the "hardware"

[@DjferreGarage]

As you have set up the boot of pinball X, windows 10, it starts up to me but you see a table open on the display then it starts up ..... it's not like yours. thank you

[@nickyscarfo1]

I want one ! A link to the website and order number for the exact pinball !

[@countheisenberg3086]

I think this is basically the same as the one in this video: www.alibaba.com/product-detail/Monster-Bash-Virtual-Pinball-machine-with_60668455297.html?src=sem_ggl&mark=google_shopping&src=sem_ggl&mark=shopping&cmpgn=1674921560&adgrp=64749141253&locintrst=&locphyscl=9027314&ntwrk=g&device=c&dvcmdl=&position=1o4&pla_adtype=pla&pla_mrctid=139878032&pla_channel=online&pla_prdid=60668455297&pla_country=US&pla_lang=en&pla_group=293946777986&pla_localcode=&gclid=Cj0KCQiAq97uBRCwARIsADTziyZKzmaRqZnsuJyxBNBnLXfHZek_pyrmML8UQyaG--o3_BX7v3Y03tkaAhOVEALw_wcB#shopping-ads

[@nerdloftgaming]

No updates since to this vpin? Doesn't sound like you were too happy about it. That was a lot of money spent to only spend more money to upgrade it.

[@esmeraldarodriguez7328]

Is it licensed?

[@jackshilatos7327]

just bought a virtual pinball from alibaba, played it for the first time today, it's supposed to be 4k and 49" top of the line model, paid almost $4300 , it's a complete disappointment, the screen brightness is on max, I have no idea how to tone it down, it's definitely not 4k, my old 15 year old virtual pinball looks 100 times better than this, there is so much distortion in the sound, it takes forever to load the game, complete waste of money 😢. any help would be appreciated.

[@Samyydapekinese2715]

Get it running and sell it.

[@RichTeaChannel]

Good review! The DOF toys really do transform the immersion to another level, looking forward to see what you do with the cab :) IMO top of your list should be the leaf switches for your flippers and magnasaves - definitely essential on a vpin... To avoid the hassle you can go for the ultimarc "GoldLeaf" which are cheap, easily swapped from your microswitches, readily available and feel great! Also available in RGB for full maximum bling ;)

[@MysticGargoyle]

Do you have a link to the seller?

[@nigeldixon1706]

I bought one of these a year ago, the motherboard went u/s, replaced now wont work and the company i bought has disappeared. can you advise where you got this one from?

[@Origami84]

Maybe a little late, but if you are searching for replacemente search for atgames pinball legends. Cheap, and the reviews are quite positive.

[@eighties8]

Part 2? Enjoyed this one. Got more?

[@EskyFilms]

Willl be cool, if the screen will be 3d hologram, so it looks like an actually pinball machine.. of course without the 3d glasses

[@joshuaupham5993]

2800 for a broken machine? Yikes.

[@billb3477]

These are about $1800 plus freight forwarding fees..you're almost better off buying 2 or 3 and selling one or two and then it's almost as if you got your machine for free....

[@bikerdel8837]

Great looking !shame about the lag when playing that will need upgrading your video card!have fun.

[@thewolfhunter]

(1). Did your total price include shipping.? (2) method of payment did you use..? (3) How long did it take to get your machine from China to you home.? I ask this because I'm worried about being scammed. That's a lot of money.

[@badkluster]

Wait... you can buy this... from ALIBABA??!

[@b.o.353]

Gotta say with all you will be replacing it doesn’t sound like a good deal at all. Flipper lag.... and no way to modify the software.

[@coreysmith6410]

i would love to buy some of your software for my virtual pinball machine

[@Samyydapekinese2715]

Buyer beware, they're junk! Over the course of 6 months, (Four of those months it was on a ship or in customs getting here) I was shipped replacement parts, (Amp/s, hard drive, haptics, computer etc etc) almost monthly due to the crap parts used in its build. I ordered one from win-sun amusements, also through Alibaba. I must of got the mega mega lemon. Suffice to say it's just a bad memory now but it didn't discourage me from my quest to get one. I'm trying Darryl/DC Arcades out of N.Y. for my next pinball adventure. Stellar feedback/customer support and reasonably priced, stay tuned.

[@dllemm]

Any links?

[@AJerseyJohnnyEntertainment]

All you need to do is put a $200 Dell optiplex pc from Amazon and just by adding memory to give it 16gb you can run pinball emporium and that runs everything you could possibly want , it even comes with full versions of fx2, and fx3, virtual pinball , etc and you can add and mod everything you want. You keep saying build quality etc. but everything you have said , has made it sound like junk. It comes with cheap knock off led buttons. For pinball your better off not using led buttons. The plunger you can use hooked up analog and get a real type of control using the plunger. You could have purchased the atgames legends pinball machine for $600 and they literally give you inputs so you can add a pc to the machine and use it that way. I’m sorry I’m not trying to make you feel bad about your machine but I don’t see $2800 worth of equipment. You should rip out that computer and put a halfway decent one in and who cares about using their tables. You can get all those tables you want online very easily. Change out the computer, change out all those buttons to non led high quality buttons . And download pinball emporium (search in KZbin) . I swear you’ll be happy after that . And then you could add all the tables you like to the already 400 or so tables it comes with it. A gtx 1660 would be perfect for a 1080p monitor with turning up the graphics to ultra. You really don’t need a 4k monitor for gaming on a screen that size . You can save money by just using a 1080p screen , so you know hands down your pc will run all the tables at 60fps and graphics set to ultra. Wish you the best of luck . I hate when I see , what I feel as people getting ripped off. I feel you were ripped off. Even if you didn’t have all the problems with broken parts etc , it still is sketchy company . Def need to get the word out to avoid whatever company you used. I hope your able to get your machine the way you imagined it. Changing out the computer and tossing their game drive to the side is the way to start. I wouldn’t even bother using their windows setup etc.

[@funtyes1970]

only thing i don't like about this pinball company is it only comes with like 20 something pinball tables games and you have to add your own pinball games

[@scragglewaggle4109]

Your delay is probably coming from the TV. I really like the build but there is just too much with the his table for me. I would say just build it over time it would say money if u buy things slowly when good deals come around and u also know how to trouble shoot these things and a whole bunch of other things.

[@remingtonA123]

Definitely would rather drop another 2 or 3 grand and get a much better machine/experience

[@LordBadenRulez]

Shame man, that's a lot of money for an overpriced doorstop. I hope you were able to improve this setup.

[@loganq]

I love seeing these with the playfield slanted the wrong way. It's like they had a design meeting and said, "be sure to incline the LCD" but didn't specify which way to incline it.

[@PermaNullNill]

Isn't the top supposed to be inclined so you can put flashers there?

[@loganq]

@@PermaNullNill think about how gravity would affect a real, physical ball.

[@nerdloftgaming]

​@@loganq it's been a year, so hopefully you've learned this is the correct placement of the display for a VIRTUAL pinball table.

[@loganq]

@@nerdloftgaming I continue to know that is ass-placement.

[@funtyes1970]

why cant you format your hard drive and start over ? or buy a new hard drive. plus it not like you paid a lot of money for this pinball machine . yes $2800 is a lot of money but not in virtual pinball i see some people spending $7000-$8000 or more . just saing

[@GetOutSmore]

How big is the tv in this?

[@EpikYeti]

49 inch

[@arnoldj.rimmer5116]

Interesting, cheers.

[@Curratum]

Why would you waste 20 minutes to get to the fact that it actually has input lag and is this pretty much not worth any money at all?

[@darrenmartin9856]

That is windows 7 download linux hacking tools and change administrator password will literally take 5 min.

[@BillBene67]

Great idea....how would you do that? I have a machine like this

[@darrenmartin9856]

@@BillBene67 Google it. You download the image to a usb, restart the machine and it select the menu option to change passwords. It is that easy.

[@speedbird737]

WTF the monitor came broken and you paid for a replacement????? are you crazy?

[@Darwinion]

I think that's pretty poor value to be honest. For that graphics card it must be a 1080 screen. The build quality and "clean" look does look good. But it must be CNC cut which you'd expect for that price. But it's only skin deep. I'm currently building my own 4K screen cab for easily less than half that cost. It might not "look" as well built as that but it is solid. Woodworking is not my forte and things inside look rough. But the exterior is what I'm concentrating on and I can tell you that 4K screen with GTX1070 plays like silk with VPX 10.6. Not being able to modify the tables just sucks balls! That reason ALONE is a deal breaker forgetting about everything else! No leaf switches on flipper buttons? Fail. They aren't that hard to find.

[@ien2023]

Celeron? No wonder it's loading so slow. I have a 3/4 size V Pinball and it's running Core i3.

[@vpin-shop7980]

it´s hard to see, that a comemrcial took my artwork which was made from stuzza on my impression...

[@alkohallick2901]

For $2800 I want better than "ok".

[@Vintiqueture]

21:17 are you sure, bud 😎

[@EpikYeti]

Yea, after nearly a year of reflection, no I'm not happy with the purchase. I'll be posting a follow up video to show what the table looks like now! Everything inside is new!

[@hiltoncriss]

Eric Adams Can’t wait for the new vid! Subscribed!

[@hiltoncriss]

Eric Adams what is the creek size? 40” or 43”?

[@max19116]

Price?

[@themaineadventure4687]

21:40

[@kirkwatstien6979]

AS FAR AS THE AUDIO GOES IT'S LAW THAT THE AMP PUT OUT MORE AMPS THAN A SPEAKER CAN HANDLW BWCAUSE IF YOU DON'T THAT DISTORTION WILL SHOW UP MUCH EARLIER...ANYWAY THATS JUST STEREO "LAW ALWAYS HAS BEEN TO KEEP FROM BLOWING SPEAKERS DISTORTION COMING FROM AN AMP CAUSES HEAT HEAT WILL BURN OR BRITTLE THE VERY THING HAIR WIRES AND COO THE SPEAKER THE OPOSITERARELY IF EVER HAPPENS BUT CAN IF PUSHED TOO LONG..BUT BACK TO ADVICE i'D CHANGE ALL OF THAT AUCIO OUT AND GO WITH A NICE USED THEATER AMP AND USE A SUB ALMOST ANY SIZED SUB WOULD BE SUFFICIENT AND WILL REALLY EXPAND YOUR EXPERIENCE FOR PEANUTS PRICING ID DO IT ESPECIALLY FOR WHAT YOU CAN GETR ONE OF THOSE FOR THESE DAYS THE SUB WILL BE THE MOST EXPENSIVE THING IN THE USED KIT BELIEVE IT OR NOT AND NO YOU DO NOT NEED A HUGE ONE JUST AN AMPLE SUFFICIENT ONE AND SIMPLY PLACE IT IN THE BOTTOM OF THE PINBALL CASAE ANS SO IT DOESN'T RATTLE USED LIQUID NAILD TO GLUE THE CASE OF THE SUB TO THE P[INBALL CHASIS. NOW YOU HAVE A GREAT SYSTEM

[@jamesthompson6557]

I think your CapsLock key might be busted....

[@kirkwatstien6979]

@@jamesthompson6557 NO IT'S BROKEN

[@CharlieEdward25]

Links ??? Dam locked down i would just remove all there stuff and use the cab only

[@darink1067]

eek. looked ok until you started playing it. lag and no haptics make it a complete no go

[@LunchboxBrimz]

Part 2?

[@MrJaz8088]

You received it Broken and the Company would not replace it , i would of thrown the whole thing though the company window, grabbed the owner, and put his head throw that broken LG TV, How Dare They, there is Law and if you break it, i will Not play nice Name and Shame The Company, Buyer Beware .!

[@Roadsurfer2k11]

Rich yet no research 🤦‍♂️definition of impulse buying. $2800 for a non modifiable setup that needs another $1500 (gpu is $500 used to $900 new alone). And 49" is awkward considering I have a real '80s machine that measures around 43" diagonally

[@MobileDecay]

$2800. For that? That sucks.

[@alanrink4268]

50 percent of having a good table is tweaking the tables to play fast an correct. That's too much money for something interact replace the entire colputer system that's really the heart of the pinball machine tables just for looks. The tables what makes you think you have a real pinball machine but it doesn't make the games any better. Got to say it's a waste. Too much delay, sorry 2800 for wood. Putting a computer together takes a ton of time and if you can't use a computer, then no good. I think these tables are better for someone who doesn't really understand anything about virtual pinball and doesn't know about lag etc.

[@EpikYeti]

Totally agree, this is not a good value. At the time is was fine because I had something to quell my desire to have something while I figured out the hobby. Now I have a very good understanding of almost everything, with maybe the exception of getting pinup popper front-end working right. I'll be posting a few videos of where I'm at now and my total spend on the project.

[@bidennumbskull7613]

Gut that hunk of junk,… build a new one using good parts.