Ernie Ball super lock installation without drilling a guitar

[@RussianColluder]

Those shakes at the end are what I came for. You’re a gentleman and a scholar. Ty

[@bang9869]

2:55 when the breakdown hits hard

[@kurtbaechler9696]

Underrated comment 😂

[@zarlodious1]

I used the Ernie Ball screws on my Epiphone they were actually slightly smaller but worked perfectly.

[@alan6six6]

Great!

[@ramencurry6672]

They’re actually good and plenty satisfied. Use it on my bass guitar.

[@71m3w4573r]

Use these on my Les Paul. Can confirm Ernie Ball screws work fine on it

[@alan6six6]

great!

[@brostoevsky22]

Grolsch beer red rubber gaskets from the glass swing top bottles will do the trick. No mods needed, plus you get to drink two good beers.

[@alan6six6]

Btw after 6 years I'm still using this guitar and starp lock. Still good as it is!

[@steveluther4966]

Don’t use soap to lube the screw threads! It will eventually rust. Use bees wax! I do really like the strap locks!

[@alan6six6]

Thank you for your advice steve! Yeah, the strap locks is really good 🙏

[@jamesreaves5534]

Use Gulfwax. Paraffin wax used for canning food. Soap draws moisture, will cause rust and the wood to swell. Bee's Wax is too soft, sticky and gummy. Gulfwax paraffin wax is superior. Gulfwax is also great for rubbing wooden track drawers and windows.

[@Bubinga5]

@@jamesreaves5534 Why on earth would you need to wax the screw.???? Just screw the screw in.

[@jamesreaves5534]

@@Bubinga5 It keeps the Screw from splitting the wood, stripping the top of the Screw out and/or wringing the Screw off.

[@redfurydubstep]

Man I love Jackson reverse headstocks

[@tch8787]

I’m confused as to which brand strap locks u have to drill your guitar for...they’re all like this

[@sanctusdead]

The Dunlop ones. Model is SLS1033BK. On amazon they have a video showing drilling for installation.

[@kberwager]

Question 🙋‍♂️ I just bought the Ernie ball super locks for my acoustic guitar and strap but since the end of the super lock is closed, I can’t plug an amp or PA system in. Is it doable to just screw a super lock strap button beside the end pin on the bottom of the guitar? This way, I can plug in and still connect the bottom strap

[@jellowrock]

What is that cream you put in the screw?

[@alan6six6]

@@jellowrock im using soap. But upon checking in few forum I didn't recommend it. U might want to use proper lube for wood.

[@Jakob_W3Ch4rg3_]

Does anyone know if the Ernie Ball screws work fine on a Squier Bullet Strat? Edit: I checked a month ago, and it turns out the holes aren't deep or wide enough to accommodate the Ernie Ball screws unless you drill them.

[@Fragments_Ov_Shattered_Malice_]

They work on any guitar

[@Jakob_W3Ch4rg3_]

@@Fragments_Ov_Shattered_Malice_ I probably should have updated my comment when I checked. Turns out they don't unless you drill them. The holes are too shallow and not wide enough.

[@bennethos]

Very useful guide thank you

[@thesmartphones2347]

Work fine in a Gretsch? Thanks!

[@ottson]

What's that gluey stuff you used on the screw?

[@mariovera2905]

Soap

[@danivanon]

what's the white stuff?

[@alan6six6]

Its a soap bar. 🙏 But u might want to use other proper lube

[@danivanon]

@@alan6six6 gotcha thank you!

[@urawr0810]

Frozen semen

[@chillymcfreeze3168]

Im planning to buy 3 sets of these..

[@alan6six6]

Janssen Maano you should! IMHO i think its better than dunlop, looks cool too!

[@chillymcfreeze3168]

Raz Mag yeah.. it does looks cool.. hehe.. thanks for the video man.

[@luknit]

@@alan6six6 totally agree. I already have Fender ones on my ESP which are same as these Ernie. Looks brilliant in comparison with dunlop.

[@abelardogonzalez2437]

Nice! Name song, please?

[@foivos_p]

march on ethan meixsell

[@aniaazaizam5640]

Good information!

[@georgecharleston2597]

Well I'd say that was a good test of durability

[@Skelterbane69]

Awww, they have nuts? Shit. I really want a straplock that doesn't have a nut you ogtta tighten, nor ball bearings that can get stuck. Wish shallers could use the same locking mechanism as dunlops...

[@sevii4860]

Is it necessary to drill out some material to fit in some strap locks?

[@alan6six6]

Yeah, depends on the size of the screw. Btw sorry for the late reply mate!

[@adolfovillegas6249]

Work for fender Basses?

[@alan6six6]

Hi Adolfo, im not really sure, maybe if u have gibson/jackson guitar to compare with your fender screw, then it should be fine 😁🙏

[@johnraspberry2269]

the backgroud song is amazing!

[@CosmicXRay]

Thanks

[@TheMrLoucrazy]

Great! whats is the background music name?

[@alan6six6]

TMoreira hi mate, sorry for the late reply, i cant remember as i randomly picked the song provided by KZbin 😅

[@numerousattention103]

March On

[@kaspermord1519]

@@numerousattention103 By what artist?

[@foivos_p]

march on ethan meixsell

[@TheZenithphoenix]

great way to make a how to video - put the speed at 200% Fortunately KZbin has a solution for that.

[@rocker8692]

I dont trust that lock without a lock washer on it

[@alan6six6]

I've use it for a year, no problem. Give me confidence on stage 😀

[@MaineDoom]

Good video. Obnoxious music.

[@rayfabris2512]

will it fit a les paul?

[@alan6six6]

I think it should be fine

[@rayfabris2512]

@@alan6six6 ty

[@polkovnik2279]

Used Man

[@scottjones6624]

totally obnoxious pounding music. left after 1 minute. Why did you do this......

[@RaulDL]

Just turn down the volume its not that hard.

[@apostle7772]

Jesus christ is coming repent choose him today he loves you. .

[@JtJt-bg8rn]

Can’t hear a word he’s saying 🤢 too noisy .

[@sisisito]

it's because he isn't saying anything, b r u h