EROMMY 12'X20' Galvanized Steel Hardtop Gazebo Assemble Video

[@Resrchmech]

At 03:01 and installation section 02:57 (Parts Z & Z1) For this metal brackets that go on the panels we added Rivets size 1/8 diameter and 1/8 length, the hole was drilled with a 9/64 drill bit. Rivet tool was $24.00 and rivets $7.00, well worth it. Reason was the brackets kept falling out making it hard to slide the panels into the channels they go into. At 03:57 for the Plastic spacers (Part Y) we added double sided tape $8.00 to the ones that are used under the panels where two panels would overlap to keep them in place. This two extra steps will actually speed up the installation and save some marriages and friendships.

[@paulareed1991]

How do the anchor screws work?

[@MichaelHenderson-h9o]

How long to assemble on average?

[@gelderruiz3353]

i need the manual instruction for gazebo 12x16

[@EROMMY_official]

Hello! Could you please offer me your order number?

[@gelderruiz3353]

i need manual instructions for gazebo erommy 12x16

[@EROMMY_official]

Hello, you can download the assembly instruction from the product page. Thank you!

[@red347lx]

How much does the 12x20 unit weigh?

[@EROMMY_official]

Hello! Please contact our service team at [e-mail] to get further support. Thank you!

[@galleriagiftshop]

I have n't received all the five boxes I am supposed to, but the ones I opened has no instructions, can you please send me on e

[@EROMMY_official]

Hello! Could you please offer me your order number?

[@EclecticDiscus]

I need the 1, 70 yr old disabled man, how to assemble vid.

[@EROMMY_official]

Hello, we also offer the assembly service, you can order from our website. Thank you!

[@kevinstewart8]

@@EROMMY_official woosh, over the head LOL

[@galleriagiftshop]

I've send the order number I tried to reach anyone but you don't have a customer service number, I need more parts and instructions pleaseeeeee

[@EROMMY_official]

Hello, sorry for the inconvenience! Could you please offer me the order number and email address? Thank you so much!

[@KennethAnderson-m1y]

6019 Kory Inlet

[@LS-bb9qh]

Your instructions on the netting are terrible. Makes no sense. How does the Velcro work.

[@EROMMY_official]

Please contact our service team at [e-mail] to get further support. Thank you!

[@nicolelong6446]

Hey Erommy_Official I’ve tried emailing multiple times and no one responds. No phone number? That’s suspicious. The hooks for the curtains in the front slots do not fit through the slide. There is a metal ball at the end of the slider that is too big and the hooks cannot pass by it. Bad design.

[@Resrchmech]

At 03:01 and installation section 02:57 (Parts Z & Z1) For this metal brackets that go on the panels we added Rivets size 1/8 diameter and 1/8 length, the hole was drilled with a 9/64 drill bit. Rivet tool was $24.00 and rivets $7.00, well worth it. Reason was the brackets kept falling out making it hard to slide the panels into the channels they go into. At 03:57 for the Plastic spacers (Part Y) we added double sided tape $8.00 to the ones that are used under the panels where two panels would overlap to keep them in place. This two extra steps will actually speed up the installation and save some marriages and friendships.

[@brownshantia]

for the metal bracket at 3;01 (parts Z and Z1) is the metal supposed to be shown on the top of the roof ?