Escalade Interior Swap In My 08 Silverado Single Cab Pt. 2

[@andrewbobbitt5184]

I just swapped my interior to the LTZ. On the doors I swapped the wiring harness in the door and everything worked. It was pretty easy to do. Working on getting my heated seats and electric seats to work now. I swapped the entire interior wiring harness out as well. Dash will be next once I get all of that working. Thanks for the video looks good.

[@gonzv9829]

What trim level is your truck? I been looking in to adding OEM power folding mirrors to my 08 Chevy Silverado? Did you have to swap out the fuse box or did you just swap out the LTZ wiring harness and was it just plug and play?

[@gto.eduardo958]

Did you have to swap BCM ? And if you did was reprogramming easy ? @andrewbobbitt5184

[@Fiischh]

Aye appreciate you taking the time to upload an update. The 4 buttons to the left of your radio should have an existing harness that’s behind your air vent on the left of the steering wheel. Just a matter of reaching the new location.

[@elusiveperformance4347]

Thanks man I’ll look for it see if I find it!

[@merkyssanchez11]

I did this same swap. Im stuck with the driver door wirering. Also, i was able to get my ac working, but my heater dont work. I color match the wires and ended up with one extra.

[@toddmurray5942]

I’m not sure of Silverados but as for my 07 nnbs Sierra crew cab (SLT)I was able to splice my harness in order to get everything to work. EXCEPT for the a/c controller. The gmc dash harness has (2) wires LESS than the Cadillac harness. I’m going on round two this morning and that includes the ENTIRE SKELETON OF THE ESCALADE DASH WITH HARNESS FROM THE FUSE BLOCK UNDERNEATH THE HOOD AS WELL AS THE FLOOR HARNESS. THE ONLY HARNESS THAT HAS THE SAME PART NUMBER IS THE ONE THAT CONNECTS THE FAN MOTOR AND BLENDER WITH HEATER CORE. WISH ME LUCK

[@ManMrKrazy]

Update?

[@PapawsDadillacOEMplus]

Jealous as hell on those door panels! Looks good!

[@Jessiewithadraco]

Can you make a vid on how you wired the harness or send a vid on ig? I matched them color for color and only my CEL turns on I also tapped the gold wire

[@artemiocortes8556]

Damn, good job

[@mo_daville_9046]

Great video bro . Thx . About to do the same to my 09 GMC single cab . Just using the outer skeleton of the dash , seats ,door panels , steering wheel and console . Need to figure out location of the AC controls myself . Thinking of extending wires harness to the lower console and putting them in there .

[@elusiveperformance4347]

I thought the same maybe extending the wires to hide it in the glove box or something!

[@Warren3carpentry]

Looks great! Love it!

[@travisjae1775]

awesome job bro, that dash seems to be the same as the 07 Denali. I'm going to swap the 07 Denali interior and upgrade my 2000 Silverado LS. I will be getting the 07 interior wiring harness as well. Can you share with me what I need to do when connecting the wiring?

[@zu1502]

My friend if I get the dash and center console from an Escalade and put it in my 08 Tahoe the dash should fit flush ? Or do I need to modify ?

[@haygood9]

Nice job 👍🏾

[@marior9077]

Im probably the only that know how to make an escalade interior work on a silverado like oem. I done plenty of them ill make a KZbin video one day show you guys how is done

[@danielgarcia2127]

Following

[@ryanlee3792]

I just did the swap and everything works as it did before the swap but now I have lost power to the driver window and passenger front windows. Have you experienced this?

[@ManMrKrazy]

Instagram?

[@joseturcios4607]

Did you ever figure out how to make the Escalade one work??

[@TravisMorrisofficial]

Cant u tell me how to get cluster to work im in middle of doing swap now

[@schowers]

You could put a cb radio in that whole

[@1crabdogg]

Clean bro

[@teamosc]

Anyone figure out the ac controls yet?

[@chroospen]

were the seats just bolt in? our work truck needs new seats and im tryna figure out where i can get seats from

[@2lowsierra]

Litttt🔥

[@alonzoortiz18]

Nice

[@fromthat_559]

Did you not use the Escalade harness for the dash? How did you make the harness plug into the engine bay?

[@jeffreymartinez1435]

They sell adapters for the Chevy harness to the Escalade cluster

[@pablolambar8069]

Hey did you have to switch the window seal where the panel hangs from?

[@elusiveperformance4347]

No i didnt

[@callumyocius2958]

Did the seats bolt right in?

[@HermesVintage]

For the seats did you tap into the original truck harness?

[@lilwin2k7]

This is the same question I’m trying to figure out because the connections are different

[@cmreno0509]

Question what's size are door cables?

[@elusiveperformance4347]

Don’t remember I just know they were longer I think than the silverados cable

[@gershomtolmachev325]

did you have to change the key and key fob

[@elusiveperformance4347]

Yea had to program them to the bcm

[@mrmisterfresh]

What did you have to do for the door panel to work ?

[@elusiveperformance4347]

Just get the cable for the latch off of the escalade the Rest or the clips and bolts for the door panel mount the same onto the actual door on the Silverado

[@reggierincon]

Your #

[@jeffreymartinez1435]

How much did it cost for the whole build?

[@jeffreymartinez1435]

I’m looking to do this to my Silverado

[@elusiveperformance4347]

I paid $800 for the whole interior bit of a drive away from me than I did all the work myself but with gas and stuff for the trip I’m probably $1000 into the swap

[@1sik5_0h]

Hey bro U got a ig I can hit u up on I got some questions on the cluster

[@elusiveperformance4347]

eldri_montoya bro

[@1sik5_0h]

Dm u but says u can’t receive new messages bro

[@elusiveperformance4347]

@@1sik5_0h what’s your ig? Or add me on snap if you want emontoya_69