Escort Cosworth Wrc Replica Build Ep11 Building a Cheap Rotisserie Rollover Jig

A Slight Deviation From The Usual Content, In This Episode We Build A Cheap rotisserie Rollover Jig Using Mainly Scrap Metal And Mounting The Car On To It.
Hopefully This Video Will Go Towards Helping Others That Are Also Looking To Build A Rotisserie For Their Project.
If You Like This Video And You're Not Already A Subscriber, Please Consider Subscribing To The Channel To Keep up To Date With The Progress.
Below Is Some Links To Some Of The Tools You See Me Using In My Videos
Milwaukee Grinder:
amzn.to/3PnXhjI
Milwaukee Die Grinder:
amzn.to/3sEo2rl
Milwaukee Belt Sander:
amzn.to/4822TaY
Roloc Sanding Disc:
amzn.to/3sN6Gsc
Sanding Belts:
amzn.to/3R7MzPB
R-Tech Mig 180:
amzn.to/3R55ZEU
Zinc Weld Through Primer:
amzn.to/45RgEam
Crimped Wire Brush For Angle Grinder:
amzn.to/45TBHco
You Can Also Find Me On Instagram @t_devil
if you'd like but me a coffee check out the link here... www.buymeacoff...
For Any Business Enquiries Email Me @: [e-mail]
As Always, Thanks For Watching And Hopefully ill See You In The Next One.
‪@rtechweldingtv‬ ‪@MilwaukeeTool‬
#ford #cosworth #fastford #milwaukeetools #performanceford #retroford #rs2000 #builtnotbought #rust #becauseracecar #cosworthwrc #escortcosworth

[@dhes2809]

With your attention to detail both these cars are going to be pure class.

[@Tdevil86]

I really do hope they come out well mate, trouble with me being picky means everything takes long to get done but il get there one day lol

[@Thechief49-x4t]

Brilliant job. Thanks for sharing. And yes, welding on zinc is BAD with a capital B !

[@neilfairless4589]

Well done Terry. You have come so far since you started these builds mate, gotta be happy with that fella.

[@Tdevil86]

Oh absolutely, I feel like Iv come on leaps and bounds with my metal work, and also being in front of the camera, still plenty of scope for improvements though 😬

[@aliso8017]

You know you are in front of a true craftsman when he doesn't just get his work done - but also produces his tools! Impressive planning and executing, this build is so much more than just a good car build. Love it🙂

[@trevorwoods2580]

Mighty job Terry well done

[@stephenbradley5805]

That's the same design as I built for an impreza that I built for drag racing and it worked fine.

[@antondelgado-e6k]

Very nice work. In short time I do video building escort cosworth réplica 4x4 in Canary Island.

[@Tdevil86]

Yeh man do it! We need more content on these old escorts, there’s not a lot online atm! Do you have good access to parts in the canary island?

[@martingibbs9277]

Great job 👍 looks plenty sturdy enough 👍

[@Tdevil86]

Surprisingly sturdy to be honest mate, I was expecting abit of flex still in the upright but there’s none at all, made up with it 🙂

[@tbdogfosters]

brilliant work as always mate loving how the front end looked 👌

[@Tdevil86]

Thank you mate, looks mean all together doesn’t it! It’ll looks sooo good once done and painted, I cannot wait!

[@c111prs]

Some pretty impressive engineering there mate, bespoke to a mk5 escort, you could hire that out when you’ve done with it and get your coin back, Imagine if you’d borrowed some shopping trolley wheels for the project to cut costs :) left us all in suspense to see the underside

[@Tdevil86]

Thank you mate, I’m stupid enough to probably buy another escort at some point so it’ll come in handy again at some point anyway I expect lol Shopping trolly wheels would have been ideal, and some of them have the wheel locks, ffs, wish I’d thought of that 🤦🏼🤣 Ever great show leaves you on a cliffhanger 😉 we all know it’s doubtful there will be any good metal underneath though lol

[@NicolaasPlatenkamp]

Great Job! Save some money there.

[@Tdevil86]

Thank you, saved money and got some good experience/practice from it aswel, win win 👌🏼

[@TheGt5ive]

Terry you are awesome mate, been subscribed to your channel for a few months now and your videos are really enjoyable and insighful to watch. That car has come a long way and your dedication is great to see. Can't wait to see what lie beneath in the next video, haha

[@Tdevil86]

Thank you man, I appreciate that!! I’m still yet to have a proper look underneath myself yet, the only evening Iv had down the workshop I spent trying to get the pivot dead right lol hopefully il be starting the next video this evening and having a good look, god help me 🙈😅😂

[@bigsquatchsasfoot1964]

Wow what a brilliant job Terry and the money you made it for amazing! Car looks very well balanced and comfortable on it to so big win all round for you dude ..cool build enjoyed it 👍 picked myself up a 1 owner 86 ( I think ) mk3/4 escort 1.6 ghia today with 50k so I’m gonna be busy to will we ever learn mate 🤣

[@alexcox1103]

Nice work bro! Another awesome episode

[@bentaylor774]

Awesome video mate you make it look so easy take my hat off to you an absolute pleasure to watch keep up the good work 👏

[@Tdevil86]

Thank you buddy, it’s the wonders of editing that makes this stuff look easy lol

[@dirkstellmacher423]

Thank you for this realy nice Video 😊.

[@Tdevil86]

Thanks for watching it dude 🍻

[@bigturboxr3i]

Instead of a tube between the jigs just use a ratchet strap on hooks. Then always pull them into position.

[@Tdevil86]

Can’t say Iv ever seen anyone do it like that if I’m honest, I’m just going to popping some box section in there to keep the jigs square to each other and hopefully stop any chance of one trying to tip over…

[@tonyestvik7969]

Good job Terry! Nicely build, little in the front, does the standing post bend or just the camera angle....? Have been looking for rotissoty at home, Sweden, about 15-2000£..... but found on eBay for around 6-800£, in UK of course, you and your Brexit... But I will keep on searching....Hey GRATS TO OVER 5.000 SUBSCRIBERS!

[@Tdevil86]

Thanks Tony, I can believe I’m over 5k, it’s madness! Haha But no, no bend on the post mate, that is just the camera thankfully! You should make your own like I have, it saves a good chunk of money, especially if you’re looking at those sorts of prices over there, that’s crazy!! Only thing I’d change on mine is putting atleast 2 lockable caster wheels to stop it rolling around…

[@starfox_wr-45e93]

I heard once "There isn't an original thought on the planet", and now I'm starting to believe it. "Home Built by Jeff" Did a DIY Rotisserie almost identical to this a few years back.. not saying you plagiarized it or anything, just found it funny knowing that saying. For the record, Jeff's build was turned out really solid. Solid enough to load it, with an Alfa attached, onto a trailer and tow it somewhere. Which I thought was nuts lol. It made a two way journey unharmed tho iirc 😂 So you're onto a good one with the design, Terry. Just wanted to let you know lol Link to Jeff's build kzbin.info/www/bejne/l5vQf2uIbNeJe5Y Or search "DIY Rotisserie - Alfa Romeo 105 project car build part 5" Sick channel. Crazy builds, one man band, does absolutely EVERYTHING himself. Pretty much like you.

[@lukeframpton3671]

Did you look up the raptor underseal for the inside of your fibreglass panels

[@Tdevil86]

I haven’t done yet no, I don’t think i will doing it though if im honest, it’ll just add extra weight unfortunately and I need this car to be light as possible

[@nigeltrigger4499]

Apologies if I have missed a video, but @terry is the Audi/Escort project still happening?

[@Tdevil86]

Yeh still happening mate, just been tackling what I can on the wrc replica before my friend moves he’s scooby back in… Hopefully il get back into the Quattro escort soon and make some more progress on that one 🙂

[@nigeltrigger4499]

@@Tdevil86 Fantastic! Your work is great and I look forward to all of your projects!

[@Tdevil86]

Thanks Nigel, I may do a little bit more on the Quattro escort and jump back on to the wrc rep and try to push that one through the finish line, otherwise it’ll take a couple of years to finish either if I’m juggling both…

[@starfox_wr-45e93]

@@Tdevil86 You'll be filming the scooby build still, right? Was really enjoying the "wide-arch adventures" 🤣 I love a bit of fibreglass work lol

[@Tdevil86]

@@starfox_wr-45e93 truth be told mate, I’m not sure, I’m not entirely sure if he’s going to be continuing with the wide arch thing anymore, he’s lost the love for it atm but I’m hoping once it’s back in the workshop he’s motivation might come back and he’ll get back into it, only time will tell on that one bud

[@paulriggers1558]

fk me, damned impressive young man, if you ever get sick of cars, start taking commissions for jigs... watch that galvy, twice i have given myself the shakes [poisoning], not nice... keep it up, but don't burn yourself out young man, we await in anticipation...

[@Tdevil86]

Cheers Paul, I actually really enjoyed building the jig to be honest and certainly wouldn’t say no to building another should anyone want one. I did look into welding galv after and found it’s really not good to be breathing that stuff in haha so yeh, I think I’ll be avoiding that stuff in the future 😅 Trying to take a slightly more laid back approach now and just upload when I can rather than pushing myself to make it work fortnightly, it does definitely take its toll! It’s easy to get lost in this KZbin stuff though!

[@paulriggers1558]

good news, there is lots to do, we need to keep you fit, both physically + mentally....@@Tdevil86