ESP-ME Modular Irrigation Controller Programming Instruction

[@cynthiascariati6543]

I know this is a older video but I just saw it and I'm having a problem with my... Mine is repeating after the program ends. I bought this house recently and it had this system included and I tried to change the time and the days of sprinkling and I'm not sure how to clear out the others

[@SchepersLawnSprinklingSystems]

Hello, it sounds like you multiple start times on a program or another start time on a different program. To remove a stacked start time push the up arrow past 11:45pm and it will go to off. Hope this helps!

[@dawoodrahman274]

102 decoder two vaal singal vaal start and other vaal not work please explain

[@fronkl]

really good video,,but lacked 1 question,,LOL. Do all these stack start times?

[@SchepersLawnSprinklingSystems]

Yeah, the start times will stack. For example, if you have 3 start times all at 2am the system will run through the program 3 times.

[@fronkl]

Thanks! You may have just solved my next problem! I gave all 6 stations a 4am start time, but the system was still running at the end of the cycle. I will start 1 at 4am and leave the rest alone? All are set for 20 min runs,,

[@richdeg22]

How to test a station I want how do I skip 1st or 2nd station if I only want to test the 3rd station?

[@SchepersLawnSprinklingSystems]

Hello, go to manual station, advance to the 3rd zone, and push the right arrow button for 2 seconds. The zone will start.

[@chrishall5368]

if my system set to come on Wednesdays and Saturdays but come on every day how to fix that problem

[@SchepersLawnSprinklingSystems]

Hello, you need to go to each day you don't want it to water on the dial and turn it off by hitting the minus tab on the controller, that will put slash through the water droplet and no longer water on that particular day.

[@martinbarba7689]

So, I can´t send signals to 2 or more stations at once; I need to cycle one on a time

[@SchepersLawnSprinklingSystems]

Yeah that is correct, one zone or station runs at a time.

[@martinbarba7689]

thanks

[@kathynewton5490]

Why does my system keep repeating at the end of the set time schedule?

[@SchepersLawnSprinklingSystems]

Hello, you have multiple start times back to back, possibly on different programs. For example if you have two start times at 2am it will finish one and start over again. Hope this helps.

[@kathynewton5490]

@@SchepersLawnSprinklingSystems Thank you. I will check for that.

[@thanikanikaran]

Nice mes tks

[@rogerdiedrich3958]

There is no information on how to set AM/PM

[@edrianooliveira4682]

Sugiro o manual em português

[@mauriciogarcia9056]

pongan uno en español

[@mauriciogarcia9056]

sujieroun manual en español