ESP32 Cam: ESP32 Camera Programming using Arduino, AI Thinker, Issues Fixed, esp32 IoT project

[@Abduls_lab]

That is the problem i'm facing right now. I searched Google for all possible ways to fix the issue but I didn't find any. The esp32 cam module just keep resetting. Thank you for this wonderful video

[@lorinlorin5626]

What is the solution of this issue please : A fatal error occurred: Failed to connect to ESP32: Timed out waiting for packet header

[@pkashyap5696]

Thank you so much for this video...It resolved my issue...and now I am able to connect my ESP32 CAM with Arduino successfully.😊

[@asjdiaosdjasd]

when i change my board to ESP Board there's no option to select the Programmer : it's says "no programmer available for this board" instead

[@ankitmanani5253]

Same issue.

[@dixienormus4230]

Same here

[@redpilledsamuel]

@@dixienormus4230 Try the older version of Arduino IDE. 1.8.12 worked for me. And, 1.8.13 had the same issue as yours.

[@nayanpatel312]

@@redpilledsamuel u really helped me there

[@hk39302]

@@redpilledsamuel In serial monitor I am getting detected camera not supported how to solve this issue

[@explorerpragun431]

That god It work If you see No programer Just Upload It will work

[@lukepawlak2174]

Thank you so much. You helped me to resolve my issue as well. The key in my case was the single connection of the ground and reset pins on the arduino.

[@hk39302]

In programmer it's showing no options It's showing no programmer available for this board. And in serial monitor it's showing Detected camera not supported how do I solve this problem please help

[@rashidkhalil5384]

how did you solve the programmer issue?

[@adrian-brawlstars9296]

Hello! AVR ISP doesnt show in that list . Can you help me?

[@marinasafwat6810]

can you tell me the solution if u solve it

[@Simu-v7h]

I tried giving it external 5v with adapter (phone charger) but it didn't work It is showing the same camera probe failed thing

[@mars420tame]

ets Jun 8 2016 00:22:57 rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:2 load:0x3fff0030,len:1448 load:0x40078000,len:14828 ho 0 tail 12 room 4

[@minhminh5008]

It has a problem: "A fatal error occurred: Invalid head of packet (0x00)". can somebody help me, please?

[@giseric3249]

Me too

[@leafiadias96]

u have to connect 1)Rx to RX and TX to TX 2)jumper wires between gnd and 100, while uploading 3) Also a male-male wire from gnd to reset in ur Arduino board 4)Once you click on upload, press the reset pin on the cam board once (when the code starts compiling)

[@minhminh5008]

@@leafiadias96 rx to rx or rx (esp 32 cam) to tx (arduino); tx (esp 32) to rx (arduino)?

[@jeugenejohn4636]

Really informative video. Thanks for uploading.

[@ankitmanani5253]

Hello sir, I'm not getting any programmer options after selecting the board. It say "no programmer available for the board".

[@dixienormus4230]

same

[@incredibletechyt3404]

same

[@incredibletechyt3404]

@@dixienormus4230 same

[@hananeca4773]

same here .. Did anyone saved this prblm ?

[@incredibletechyt3404]

@@hananeca4773 assalamu alaikkum no need programmer for this board give 5 volt with power pack and upload the code.

[@juaniplanes]

Me salvaste la vida despues de 2 dias intentando que ande,Te debo alto pete

[@teddyhraje5117]

Hello, I have no Programmer, where can I downlaod? 5:20

[@yawarsaeed6499]

Aoa, you must be aware that in upright position of the esp32 cam module the images taken by the camera in this default position is upside down. Can you please guide, is there a way to correct this to 180 degree rotation of images by modifying some camera parameters in code. Please reply. Awaiting your earliest response.

[@ShreshthTiwari]

there is no AVR ISP programmer option in my adruino IDE

[@vimalraj.a2425]

/ did you find the solution

[@FactByte1107]

@@vimalraj.a2425 gimme the solution someone pls

[@djdarkcycle4070]

Question: esp cam board connected to nano board. But in IDE I can select all the items as indicated, except for the programmer,.I can only choose "esptool". Any suggestion how to enable the avs isp programmer in IDE? (Just started with arduino stuff..)

[@bath4rakala]

downgrade your ide, im using 1.8.12

[@dipakbundele8230]

@@bath4rakala give download link of version 1.8.12

[@aashishkumbhar5674]

Hey I have a problem regarding wifi connectivity to esp32cam any solution plz?

[@vishaljain6130]

A fatal error occured when uploading the code as : MD5 of file does not match data in flash. please help me out anyone. I will be highly oblige.

[@darkking6732]

Teşekkürler dostum çalıştı.

[@JovieDjouks]

J'arrive pas a résoudre mon problème Quant à je téléversé le code on dit que la caméra not found le genre d'erreur que vous avez mentionné dans la vidéo mais je sais pas comment faire pour résoudre j'ai pas bien compris. De l'aide svp 🙏

[@michaelkeandremusic]

Any reason why I keep getting an error message saying no such file or directory for esp_camera.h on the web server code?

[@polashchandramondal79]

thanks a lot.. Few days ago i buy a esp32 camera module.. But it’s didn’t work... It’s show camer int Problem ... After watching this video i give external power supply and it’s work fine.... Thanks again

[@randolfaquino9998]

how do you mean?

[@polashchandramondal79]

@@randolfaquino9998 give esp32 cam module 5v 1A power supply.. It will work fine

[@ThierryC2373]

Most of the time, you just have to select the AI-Thinker board to flash them. And I agree with Tiera Aimes, the music is annoying.

[@ceejayc6502]

Then fuck off, problem solved! :)

[@omshivtiwari]

True

[@thiennhanpham9717]

I follow the step, but i keep receiving A fatal error occurred: Failed to connect to ESP32: Timed out waiting for packet header

[@김만식-j7w]

I'm curious what kind of device the sensor with LED added there is attached.

[@ashutoshtechnology]

do we need to upload the Arduino ISP program to Arduino board ??

[@alphajayaraman2629]

A fatal error occurred: Failed to connect to ESP32: Timed out waiting for packet header my problem this one what i should do sir

[@radheshr8229]

sir but my programmer is showing that "There is no programmer available for this board "

[@1udde1und]

Download an older version of arduino IDE. After 1.8 the programmer option is applied when burning bootloader.

[@FactByte1107]

why cant i select AVR ISP programmer when i select esp 32 wrover in board manager in arduino ide.. pls help me someone 🙏

[@alfazheerah691]

Hi Electronic clinic, I have a question.. in my project i also have a servo motor, a buzzer and a 16x2 lcd screen. I must connect them on the arduino uno or the espcam please?

[@shalahuddinyahya803]

did you have an answer? bcs i must connect other component to

[@PawanKumar-je4zn]

its not showing programmer of avr isp help me

[@kingsharkgaming9809]

I am getting 'no programmers available ' And an error :fd_forward no file in directory What should I do....?

[@GopalSankar-bb1cz]

Thanks. Code was uplaoded succesfully and got the wifi connected with IP address, but port number not assigned. Any suggestion to fix it please?

[@MuhammadQasim-kw1er]

hey thanks for the video, however in programmer i only have one option ESPTOOL any remedy?

[@Jay-ik2ie]

Can someone help me i have error while running the esp32 cam module. Face detection and face recognition is not working Item psram alloc failed. Size: 126720 x 1 matrix3du item alloc failed. dl_matrix3du_alloc failed

[@kailashrajan9596]

None of these video shows if this module is standalone when operated. we flashed the code to cam module but do we require arduino board to be connected while it streaming video? just power supply is sufficient? does the Arduino needs to be connected to system via usb while streaming?

[@ElectroniClinic]

no, there is no need for the arduino. watch my other videos on esp32 cam,.i designed my own development boards.

[@kailashrajan9596]

@@ElectroniClinic Thanks for responding. so i think Arduino is required only to program esp32 once that's done we can disconnect arduino and only power supply is required for this esp32

[@ElectroniClinic]

@@kailashrajan9596 exactly.

[@Hawkeye1254]

Arduino: 1.8.12 (Windows 10), Board: "ESP32 Wrover Module, Huge APP (3MB No OTA/1MB SPIFFS), QIO, 40MHz, 115200, None" Multiple libraries were found for "WiFi.h" app_httpd.cpp:22:24: fatal error: fd_forward.h: No such file or directory exit status 1 fd_forward.h: No such file or directory i got this error plz help

[@samuelgrabois5754]

Exactly, same problem here I cant find even the "esp_camera.h"

[@swapnamoyhazra6036]

In my case the serial port is showing 0+0+0+0=0 0 . It is not capturing frame ,and also in browser it is showing a little thumbnail. Please help if anyone knows what is the problem!

[@vinaykasarapu8726]

Bro what about cp2102 module iam using that module but same error occurs camera not detected and error x2004 please help me out

[@StreetBitesDelightss]

Bro what is name of the item 8:21 use

[@abhirampadikkat9322]

I got an error : ivalid head of packet(0x65)... How can i solve this? Thanks

[@tjuanwashington4359]

How can we change and add more buttons for more

[@lubikapalanisamy9572]

Sketch uses 1509901 bytes (115%) of program storage space. Maximum is 1310720 bytes. Global variables use 70388 bytes (21%) of dynamic memory, leaving 257292 bytes for local variables. Maximum is 327680 bytes. Sketch too big; HOW DO I SOLVE THIS??

[@Ilham_iom]

apakah untuk upload program laptop harus menggunakan koneksi internet untuk mengupload program arduino

[@jayadevkamath7257]

Why do you need to connect the reset pin to ground❓Also in programmer it only shows esptool. What should I do❔

[@nikehx]

Same Problem

[@tonystark-kw4fv]

Do we need internet for doing this project

[@ofybc5560]

I’ve done everything as you did but once i open the web server camera stream starts lagging or something won’t even start just blank but if none of that happened once I click on face detection stream just stuck

[@Jay-ik2ie]

Hi did you fix your problem? I also have same problem

[@RixtronixLAB]

Nice video, thanks for sharing it :)

[@kUMAR22-o6q]

A fatal error occurred: Failed to connect to ESP32: Timed out waiting for packet header

[@Mainia411]

looking for fix

[@hughgoh]

Nice video I always get brownout when using Wrover board in setup, AiThinker boots without brownout , but camera is not detected, and always using an external power supply for the ESP32 module.

[@hk39302]

In programmer it's showing no options It's showing no programmer available for this board. And in serial monitor it's showing Detected camera not supported how do I solve this problem please help

[@helloworld3979]

same issue here , have you solved it yet?

[@syedsyamirbinsyedabdullah4139]

why i cant choose PROGRAMMER?

[@ElectroniClinic]

which version of the Arduino IDE are you sing? you know i tried the latest version but it didn't work, then i had to switch to the Arduino version 1.6.12. try this version.

[@ElectroniClinic]

if you watch the complete video, you will see i am using 1.6.12. while in all other videos i am using the latest versions.

[@davidparker8242]

Options in the Tools menu change depending on the board selected. When I selected ESP32CAM_AITHINKER I had fewer options than when I selected ESP32_WROOM .

[@nerviantone]

this video helped. Thank you

[@mdatiqulislamemon]

How to program esp32 module using mobile phone? Please make a tutorial...

[@liyanaaisyah9305]

I followed all the steps and encountered this error. [E][camera.c:1049] camera_probe(): Detected camera not supported. [E][camera.c:1249] esp_camera_init(): Camera probe failed with error 0x20004 do you have a solution for this, searched anywhere still no solution

[@ElectroniClinic]

this is due to the power supply. i have explained everything in the video.

[@prashantkd8235]

Did it get resolved?

[@muhammadsalem9924]

I want to implement this project: "Design of Driver Awareness system depending on Eye and Face Feature and Discrimination" Can I use ESP32 instead of Raspberry Pi ?

[@ElectroniClinic]

Yes you can, watch my video on esp32 and yolo v3

[@muhammadsalem9924]

@@ElectroniClinic Thanks

[@dragonhot70]

Hi my dear brother please 🙏 Can you solve this problem a fatal error occurred: Failed to connect to ESP32 : Time out waiting for packet header

[@norjanahmimbisa4468]

Can you do uploading to the blynk app using communication between arduino and esp32 cam?

[@ElectroniClinic]

Yes you can.

[@auxteroangelo5244]

Good day sir, How can i fix " PSRAM ID READ ERROR: 0xffffffff" ?

[@Ms.SubhadraDas]

I am getting the same problem which is serial data not received. Can you please help me with this? trying to connect esp32 CAM with arduino

[@debskie3030]

Have you fixed it?

[@subhadradas9663]

Yes .

[@vikasnirmal6199]

issue is that esptool is not showing in programmming tool so please make vedio or tell producer of it

[@donthisakethreddy7433]

Its not showing anything except save and exit symbol(x)

[@pankajdang044]

Where to purchase 5v regulator

[@PrimuSPS]

After uploading I am getting this in serial monitor when I press reset button ets Jun 8 2016 00:22:57 rst:0x1 (POWERON_RESET),boot:0x3 (DOWNLOAD_BOOT(UART0/UART1/SDIO_REI_REO_V2)) waiting for download

[@sakshitendulkar3371]

It's showing error esp32 wover module

[@swapnilmathur15]

My Arduino ide is not showing anything under "programmer"and hence the code is not uploading. Can you please help me out with this.

[@ElectroniClinic]

use another version of the arduino IDE.

[@vincent798]

anyone encounter this type of error? [E][camera.c:205] skip_frame(): Timeout waiting for VSYNC [E][camera.c:1270] esp_camera_init(): Camera init failed with error 0x20003

[@danieljoseph6404]

Yes. It got fixed when i connected it with a seperate power supply

[@andinugroho6876]

exec: "cmd": executable file not found in %PATH% Error compiling for board ESP32 Wrover Module. how to fix it ?

[@sakshitendulkar3371]

Same here

[@youpipe9]

I can't get the program to compile. "Invalid conversion from 'const char*' to 'char*'". Is it just me?

[@samuelgrabois5754]

hi excelent video, What libraries did you use in this code and where can I search them? Thanks. (#include esp_camera.h , #include

[@samuelgrabois5754]

I cant findthem in the library manager

[@koreanfever3132]

Change board to ESP32 Ai CAM Thinker

[@hhirschi32]

thanks for this tutorial! Please tell us the reason for connecting GND and reset on Arduino UNO. Thanks in advance!

[@TubeHammel]

Haha, Harry Hirsch im Studio?

[@almirbajsini]

I have no programmer how do i fix it

[@ysuzukihk]

I can not choose "AVR ISP" Because my Arduino IDE shows "No programmers available for this board .Could you let me know how to be able to choose "AVR ISP"?

[@niceman567]

i had the same issue with arduino IDE 1.8.13, but if you install 1.8.12 you should be able to see AVR ISP in programmers. it works for me.

[@vysakhku102]

I tried with 5v external supply still no change

[@milano3829]

did you get the brownout error?

[@jayasuriya456]

@@milano3829 mm ss bro

[@rhiopalmero8623]

Can you give me the codes? That you used in this video, I really need it to some of experiments. Kindly waiting for your reply.

[@ElectroniClinic]

ya, i will send you

[@dr.sarikabukkawar6521]

Sir how to do camera streaming on Blynk app?

[@ElectroniClinic]

I will make a complete series on this. I have already designed the PCBs.

[@dr.sarikabukkawar6521]

@@ElectroniClinic thank you sir waiting for more such amazing videos

[@rebel_king_yt]

I am not getting any programmer for my Arduino

[@donthisakethreddy7433]

For me the vedio is not streaming

[@kN-jv3zv]

Can you please send the code??🥺🥺🥺

[@rayanu3h]

my cam gets hot upon connecting

[@kobitadurgesh6123]

Bro 😭😭😭😭😭😭please 🙏 upload a video how program esp32cam in ardiuno of my android phone using ardiuno droid Please 🙏 bro i request you please make this video. I see your all video and share all my firend I am watting for your answer bro😢😢😢

[@celsosilvinoguambe2284]

"Thank you very much!!!..."

[@electronic7979]

👍👍👍

[@KavishKhoodeeram]

It worked for me

[@tieraaimes4282]

Other than the piano music, great video. Next time drop the music please, it isn't necessary so just annoying.

[@davidpham6571]

excuse me. how to fix "brownount detector was triggered""

[@ElectroniClinic]

check your power supply.

[@danielaiman5291]

hi can u make a video for the 5v regulator

[@ElectroniClinic]

watch my another video on esp32 cam. I designed a development board.

[@turulob1055]

not showing anything in programmer

[@harshareddy6811]

Hi bro can I get the code 🙄 for this project

[@ElectroniClinic]

article link is in the description.

[@TheUnofficialMaker]

great info, hate the music

[@sakshitendulkar3371]

My port is unavailable can anyone help

[@ElectroniClinic]

all the problems that you might face are already explained in this video.

[@binalshah5002]

Install port driver

[@incredibletechyt3404]

thank u so much

[@sandiiswampungose8644]

you're the best

[@rushikeshlone3362]

what is ssid and password?

[@ElectroniClinic]

wifi router name and password.

[@makewithmegma]

❤👍

[@shahrozKhan4u]

Grt 😍

[@yogeshitaliya473]

nice म one

[@joserizaldob.patino3293]

Learn tutorial for course of computer engineer .....