ESP32 CAM Getting Started | Face Detection

[@tarunanandrao]

Well Done broo I was crackng my head to use this and finally i used raspberry pi with picam

[@D_r_i_23]

Hello How did u do it using raspberry Pi.could u plse tel me.

[@jacobguttman4617]

Hey guys, I am writing this to help others who run into the same problem "Brownout ...triggered". This is caused by low voltage coming from the FTD programmer on the 3.3V rail. As a solution I switched the jumper to 5V on the FTDI and moved the wire over to the 5V pin on the ESP32-CAM. Everything works fine now!

[@DjLight.]

Thank youuuuuuuuuuuu soooo muchhhhhhhh

[@ergun5276]

If this method didn't work, try powering the card from a different unit instead of an FTDI unit (it worked for me).

[@abubakarawwal1708]

Please whenever I upload the code they keep telling me that there is an error with the selected port. Either is not connected or does not exist.

[@tanmayfulzele7324]

​@@abubakarawwal1708 change the port settings..

[@diminishedauthority5517]

Thank you for being the person who finally made a video a begginer can understand

[@electronic7979]

Excellent project. Very good video

Thank you very much from Brazil. I really admire your culture and country.

[@Manuqtix.Manuqtix]

The video quality in this camera module is like those old Nokia phones that first came with cameras

[@cw4608]

“All right Mr. DeMille, I am ready for my close-up”

[@planb2504]

Your hair so thick for a sec I thought it was a turban. Awesome work by the way.

[@ayishashamila787]

sir,..thankyou so much for this detailed tutorial.....it is helping my project ..thankyou thankyou......

[@Madmaxkkb]

Can we detect a particular object

[@BGMI-LEGEND2]

yep but you would have to train the esp32 cam using tensorflow or yolo

[@vivekandgauravkumar6270]

Bhai mast hai . Lekin Bhai 1 aisa video banaye jo kisi bhi likhi hui latter ya kuchh bhi likha ho to use scanner kar ke vah bole ki kiya likha huaa hai. Bhai aisa sambhav hai to ek video banaye.

[@shravannanjunda]

What if i have more espcam modules and i wanr live feed from all of them on the same ip

[@lexander9686]

Thanks for the idea bro

[@gabiold]

You have to setup a router and an internal private network for cameras (with different IPs of course), then configure the router to do port forwarding, different ports to each camera's IP. But if you want to stick this contraption to the public internet, then think about security first...

[@charantejah3181]

Thank you very much bro after a long video

[@jesser9528]

I follow your instructions but for some reason it's not working. These are the errors I'm getting on the serial monitor. [E][camera.c:1049] camera_probe(): Detected camera not supported. [E][camera.c:1249] esp_camera_init(): Camera probe failed with error 0x20004

[@poongkuyilmuse9171]

Can't find AVRISP in programs. Can you please help me..

[@shahoisam6124]

I have the same problem, have you found a solution yet?

[@donleibold9693]

Cant the program connect to the wifi and web server before setting up the camera. Then we can get the ip from the serial monitor before attaching a better power supply. I've never been able to get these to work with out the camera errors and every answer that fits my problem is mostly power related.

[@kiron-vk]

Great video. Thanks

[@abcdshikor998]

How can i control output by recognition the face?? I wanted to Say that, suppose if my face detected then it will do another work like led blink/motor running etc. Please tell or make another video using this module.... Please please please Please

[@sabnadevip7580]

whether you find that??

[@Ai_chimp]

Bro what this works in same network connection or out of the network connection like I connect camera to Wi-Fi and I took that IP and put it on my phone browser and Iam using my mobile internet data then it will work....

[@ViralScience]

The procedure i showed in this video will work for same wifi network You cannot see the stream through mobile data or other networks I will uploading another video for this... stay tuned

[@Ai_chimp]

@@ViralScience ok

[@vibhorsrivastava5281]

Hello VS, Under programmer it is not showing arduino ISP AVR. Please help me.

[@prathameshraikar5428]

Great work

You have one more subscriber.👍

[@CATips]

Great work bro

[@doel_2473]

Really good bro

[@nabiltech1366]

Goodjob bro!💯✌.Keep it up💥.U are my inspirations for create my own youtube channel.Thanks well done!😉🙌

[@abhilashkumar3116]

Ossom project bro 👍

[@howong2369]

7:51 i fail in CIF cam, what 's problem?

[@ProPro-li4mz]

Is there any led blinking while we connected to the power supply ?

[@HendroSusenoHadiSudibyo]

is the video stream can be put in to NVR?

[@prasannadinesh659]

At 4.26, whether I should un comment Ai thinker model. Can I use other camera model.

[@milano3829]

PLEASE reply , iam getting an error after pressing reset button in serial monitor "Brownout detector was triggered", tech team support from that site suggest to power the esp32 with external power to 5v using LM2596 . is this issue because of less voltage to esp32cam? i connected to 5v .

[@riogamingyt3160]

Can we make a face recognition robot . If yes then please make it. Atleast a circuit that recognises u and says your name

[@ImtiazTech]

dear plz help me for uploading code esp32 cam where i get src/ov2640.h library waiting

[@diogoferreira3047]

All good but when the IP should pop out, instead this message pops : [E][camera.c:1049] camera_probe(): Detected camera not supported. [E][camera.c:1249] esp_camera_init(): Camera probe failed with error 0x20004 plz help

[@DjLight.]

Hey bro i have also face this problem can you solve this problem? Pls

[@DjLight.]

Esp32 cam ka jo power pr wire lgai h osy 5v pr lga do or bechy sy jo module h osy be 3 ke jga 5 krdo 2no module ko 5v dna h

[@sasithajayakody2574]

how is the phone you are doing good quality vidio

[@MUFATECHSOLUTIONS]

nice work!

[@simulation9219]

everything's working but the 7805 regulator gets too much hot, does anybody also faces this issue?

[@lygexindia]

Bro u r great 👌

[@garvitgoyal5236]

i am not able to code it with arduino ide 1.8.19 . it is showing fd_forward.h missing when i compile it.i have not done any unnecesarry changes in code.i looked on net but nothing worked, can u please help

[@PowerJiang]

I work it normally on 1.8.13 for your reference.

[@mehdwiyouth6338]

please help not uploading An error occurred while uploading the sketch ...... .... A fatal error occurred: Failed to connect to ESP32: Timed outaiting for packet header...?

[@RogerGarrett]

Is the face detection done by the ESP32 board or out on that website you linked to?

[@12wfrank]

I have the same question about it

[@raulg08]

isn't there a code behind it? i don't think esp32 does face recognition by itself? or i might be wrong idk

[@RogerGarrett]

@@raulg08 I'm not sure what you mean by "a code behind it". Any processing done on the ESP32 board or out on the website is certainly done by a program, by software. Perhaps that's what you mean by "a code behind it". My question is whether the software that does the face recognition is on, and processed by, the ESP32 or it's out on the related website. It's partially a question of whether the ESP32 is powerful and fast enough to do such processing. It would be nice if an answer would be provided, along with some links to where that type of software for the ESP32 might be available.

[@kubs0710]

what model camera bro? mine not setting up the facial recognition

[@govtjob4913]

hi viral, have you faced the video stream freezing issue on esp32 cam while trying to use face detection

[@raxathor]

Could You wire it to a motion sensor so that the stream does not always have to be on.

[@Ravikalavidh1259]

It takes only photo or makes video also?

[@rohitmore7513]

Can we simulate this proteus.?? We need help

[@charantejah3181]

Do a video on esp32 cam surveillance car

[@ViralScience]

Sure

[@charantejah3181]

@@ViralScience thank you bro 👍👍👍👍👍👍👍👍

[@shivam3020]

Hello Viral Science can I change the name of subject as per my wish ? Thanks for awesome video

[@krishnapl5211]

Superb video thank's bro

[@sundayo.ademola79]

Thank you for this Video...it really help but is not detecting my face need a little help please

[@MrFabiopcardoso]

Very good. Congrats!

[@yawarsaeed6499]

Does it save the face IDs on power removal. Please share.

[@kiranshashiny]

Your module came with the Camera already prehooked - Mine does not. I was hoping to see how the camera could be connected. I got 2 pieces in my bag, one is the ESP32 and the other is my camera separately.

[@kholeo]

hello i have seen the video but when it comes to tools programmer i dont have these options u got i only have esptool is that fine? like will the code work or is there a fix to this issue?

[@ismail8235]

plz when i click on the reset button to get the url adresse in the monitor serial i get some symbols instead can you plz tel me where is the problem?

[@deepaksingha8980]

bro can you help me get the lib used in thsi project, i am having hard time finding those

[@nyayab.x]

same

[@nimaamini9038]

Hi I finally got it working but I have a new problem, if the esp32cam gets disconnected it won't reconnect to the router/hotspot/network automatically and I have to reach the esp32cam and restart it by hand. What if I want to fix it in some place high? Do I really need to restart it every time? Can't it just get reconnected to the network like any other normal device? And btw can I add multiple network credentials to esp32cam code so if one is not in range it would connect to the other ones. Thanks in advance.

[@nadersaid1329]

it with web or no web internet

[@sablightning4819]

Hey can I ask? Is it possible for the esp camera to alarm once it detects a face that is not enrolled in the camera

[@letanat8966]

Please help me use esp32 cam to both record live video while taking pictures saved on memory card

[@giangianni503]

you wired the 3.3v pin? It doesn't work with 3.3V, only 5v. At least, I tryied to use 3.3 with a 9v=>3.3v dropdown module, with arduino, no luck. And.. face recognition does do nothing :D

[@clintpereira4529]

good morning bro. With this can i record videos on my mobile phone, cause i want to use it on my drone.

[@kingsleyjide1727]

Please can i do this project with arduino nano.. can i also save these video recordings into an SD card?

[@joselagunas298]

I cant use CIF its says: Please select CIF or lower resolution before enabling this feature! buts its already in CIF and in lower resolution the square of face reconigtion dont apper

[@nikhilsairampalli]

Do we need internet in order to detect the face.

[@philippeahonon5747]

Hi Sir, thank you for your tutorials, it was great. Please, I would like to know if by inserting a memory card, the images recorded by the Esp32-cam module can be used for easy detection, or if facial recognition is limited depending on the space available to the esp32-cam , or if it is possible to store the maximum depending on the external memory add? Thank you, please answer me.

[@Madmaxkkb]

Did you get the answer ?

[@gamingwithme9748]

D9 we need to connect to laptop all the time can't we disconnect it

[@ShahriarShafin]

Does it delay a lot?

[@CodingHats]

Can we use Arduino nano in place of FTDI module??

[@henkdesain7741]

☹Nice project, I just can't save anything to the SD card. Face Detection works but the face recognition works but how do I name we detected is. Regards Henk

[@sam-el]

Please can you make a video using esp32 to implement object detection using de1-soc?

[@vaibhavpokhriyal8492]

Hello sir how to erase the uploaded progrsm in it please sir reply

[@misterAD88]

Thanks. Gréât video

[@skylinerchobbies1884]

Can make the camera work wirelessly ?

[@pankajdang044]

I'm facing some problem after uploading program. When I open the serial monitor and pressed the reset button a dotted line counting like this"...........…............". Please help me to resolve this problem. Thank you.

[@DuongST]

Great video !

[@virendraparihar6982]

I want to reinstall programming in my this esp32 cam from new point bcz some features r not working so what I need to do ?

[@projectjabir4805]

Will it suppor 10mp image sensor?

[@ShijilThachilodi]

While pressing the onboard button the LED is not blinking , I tried two boards, tried 3.3 and 5 v (on different pins), what could be wrong ? Also showing timeout error while uploading, tried two computers, tried older Arduino IDE (1.8.10).

[@Charmingbanana696]

Yes this led on board not blink at all but for the time out error check your settings in tools>partition schemes- huge......... And upload speed according to your board , if you have ESP32-S then you have to set it to 115200 and then check it.

[@tomaspatik877]

Great work mate.

[@azsayyed_uc07]

Esp 32cam and Android phone same WiFi se connect hona chahiye kya

[@parshwashahvines7759]

Antenna free for esp32cam Or we have to purchase seperately

[@rishipantawane7761]

This Final Ip address will changed every time or it will remain same once for all !Plz reply

[@shaiknihal2555]

Help me bro please I have done the project before and I was going to do your car controlled esp32 cam project from that movement I am getting an error as A fatal error occurred : MD5 of file does not match data in flash

[@kimfraga7957]

Please I need your help, How do I put the access point in this code, I already put wifi.begin softAP and it doesn't work, what do I need to change to have AP access and have all the camera options?

[@sakshidilippatil8664]

sir this video is very helpful to us , I want to recognize face with his name and some info.....can you please suggest me

[@unitedrobotics7377]

Bro make a object Detection project using the same board

[@vincentjonathan8381]

bro when i pressed the reset button the led didn't turn on and when I open the serial monitor it showed rst:0x1 (POWERON_RESET),boot:0x3 (DOWNLOAD_BOOT(UART0/UART1/SDIO_REI_REO_V2)) waiting for download

[@kennethj.mottaespinoza6728]

Lo solucionaste? :'u

[@shivamkushwaha8442]

Can I program using nodemcu esp8266

[@kfmm3411]

Thank you very much for the explanation teacher, I loved the video, I'm a big one on the channel, but I have a question How can I view images from the camera while on another network, ex: through my 4G and I see everything that happens with esp 32 in my house that is connected to wifi

[@orosenriquezoscaryair2974]

excellent project, I would like to ask a question, How can I add a 16x2 LCD so that a text appears when opening and closing the "solenoid lock"? regards🤝

[@willwahlberg1890]

You can use one of the LCD libraries and include that in the arduino code. Look up some videos on connecting it to arduino. It's only a few lines of code to accomplish what you want.

[@officialayanvarekar]

I did this on raspi without lock , works great , use with i2c backpack module

[@Geon-Harris]

can i collaborate it with body temperature sensor? instead of showing "hello subject" it will showed what your body temperature?

[@ahmetturan3895]

Can you help me esp32 ile çekilen fotoğrafın rgb bilgisisi nasıl alabilirim

[@jarts256]

Please make on face tracking with esp32

[@vinsmokearifka]

Great video. Sir, how long or max distance to capture face?

[@pannalaljana1743]

Please what is the range of esp 32 camara module

[@najmanalif5575]

did you tape your camera esp32 cam?

[@devshah4867]

Can i use arduino uno instead of ttl module for giving 5V?

[@abubakarawwal1708]

Please whenever I upload the code they keep telling me that there is an error with the selected port. Either is not connected or does not exist.

[@faraz_k._]

HOW have u opened this website becuase if i click the link from the description it only gives me the code