ESP32-CAM Motion Sensor Security Camera with Notification using Blynk - DIY Home surveillance system

[@amsf2011]

Good video. Thanks for the code and for your explanation. These videos and devices are very useful. Thanks for everything.

[@prakash52kar]

Thank you lot lot ❤️. It took a day to flash ESP 32. But As soon I load your code it has started working funtastically.. I didn't made whole circuit with pir. However it is automatically taking pictures every second. Therefore I don't know if after making circuit as you it will work and take picture button will start working . Your comments will be appreciated...☺️🙏

[@electronic7979]

Excellent project. I liked it

[@erment55]

I follow your educational videos with great interest.I would be very happy if you could share a video on how to use the esp32 camera module in IoT Blynk 2.0.

[@DV-bv9cp]

Hello. I am doing this project but ESP 32 CAM is not Linking with BLINK application. Could you please tell me how to resolve this issue.

[@roscoe3dp470]

Hi, I’ve got it working and it’s pretty cool 👍 is there a way to save the photos to the onboard sd card ?

[@prakash52kar]

ESP working. I have given high to 13 and it stopped taking picture but Take picture button does not take picture also not getting notification

[@MrBobWareham]

very nice project thank you for sharing on youtube I have joined your channel and I am going to make your project for my front door.

[@TechStudyCell]

Wonderful!

[@DV-bv9cp]

@@TechStudyCell Hello. I am doing this project but ESP 32 CAM is not Linking with BLINK application. Could you please tell me how to resolve this issue.

[@thenews25]

Best video sir ji.....Keep it up💐

[@TechStudyCell]

Keep watching

[@prakash52kar]

Why did you convert the High from PIR to LOW trigger? Can I use HIGH directly with PULLDOWN?

[@Ravikalavidh1259]

Omg Bro..ur genius hats off to u...🙏..I would like to request u too make some cheap device which can be kept in car engine bay( stationary).. Which can detect rats(motion detection) entering car & spray a pepper spray or shoot bb bullet or electrifying( danger because engine area) only by giving command through mobile remotely....I mean when rat enters to food kept in car engine area, the device have to detect by motion camera & has to send alaram message to owner..owner by watching it through camera & its position has to give command to device which should shoot rat by bb ball gun or spray pepper remotely because it should not hit other parts of engine...because all other traps poisons sprays have failed in world

[@amaghafi]

Thank you for the nice work!

[@TechStudyCell]

Welcome

[@DemoJBE]

super!! did you have the version of blynk...its a 3 years video ...with the last version is non running tanks

[@nabelectronicsprojects3716]

Very nice video 👍

[@benezer4937]

Hey man nice project. But what if I want to power it from my laptop or other way? Can I use battery instead?

[@just_zeto]

Hey i am having trouble showing the picture on my blynk app i want to kknow whether you can help me with this issue

[@sandeepbhatt8984]

Will we get live video of all times? And will that video be saved somewhere for one week, & after that automatically deleted?

[@Fakaru752]

Very nice project sir but im just wondering if the device can connect two devices and send to it at the same time when it detects motion? And lastly what is the covered distance for the esp32 cam cam send it to a device?Please reply

[@jayajanani9964]

Why to provide a 5V supply to the circuit? Shall we give it through a battery if it is needed?

[@JustinLittleAdelaide]

Thanks for sharing.

[@TechStudyCell]

Welcome

[@shakerileiwat4341]

Great project ♥

[@TechStudyCell]

thanks

[@AD-be2bc]

What is the range of the sensor. Can it be increased if needed?

[@mohamedrady6676]

Hi, if I need to record pictures at SD or my mobile can you advise by changes, with my thanks

[@protechnology550]

Nice can I use this project for vhical And wifi must for this? We can receive pictures on mobile any where in the world?

[@sayyedkasim5537]

Esp32 main two different program one for blynk app and one for storing image on microSD card upload kr skte at a time

[@karthikeyan.c9895]

Camera_pins:Bro no such file or directory error is coming bro plz tell how to solve this error

[@patrickmenga]

Good evening. very interesting this project. I am new to Arduino programming and when I transfer your code, instead of the URL I have rather "...... " how can I do it please?

[@shubeethegoldenretriver8677]

Hello bhai in home automation using ir remote program is not working what should i do

[@avelectrotech9853]

sir please help me comig error ( camera_pins.h no such file or directly) sir reply

[@nimi6072]

did you get any solution for this error?

[@Mr.Coldfire421]

I believe esp32 has a built in web server where it live feed the camera and AI to detect what object is being captured such as person, car, etc. can you make video on how to do it. I wanted to enable the notification only for human intruder not the rat from my neighborhood which enter my house.

[@irawan_teddy]

If we use different wifi conection for blynk and esp32cam, can it works sir? Thank you

[@TechStudyCell]

You will get the notification but not able to see the picture

[@vinodj7285]

May I know what is that URL you have intially copied

[@deepsatsangi8507]

Can we add a feature to report the gps coordinates of the mobile object ?

[@phunguyen-fx6th]

hi bro, please let me know how to use project with other wifi connection for esp32 cam and blynk. tks.

[@RCSmartTech0603]

Sir Can We Connect Following Schematics ?

[@rakeshkr123]

Is it possible to record video using esp cam?

[@bradmiller8604]

can i use a rcwl5016 sensor in place pf the pir with the same wiring ?

[@erodeemperor]

Help full video 💞

[@TechStudyCell]

Thanks

[@premkumarn8887]

Can you do this project present Arduino ide and blynk application

[@saharshsinha5349]

Is there any way to save those captured image into the image gallery of the android device on which blynk app is installed?

[@avtech321]

Sir, please make a 180 rotate camera use only esp32cam board. And don't use any development board

[@rohitmore7513]

Can we simulate this in proteus??

[@rohitmore7513]

We need help

[@christoprinsloo5096]

Hi There, i've followed you tutorial, but not it's not working. My ESP keeps on taking pictures even when there is no motion. Please help

[@Tony-cw6om]

Have you find the solution please reply! I have the same problem .. Thankyou

[@christoprinsloo5096]

@@Tony-cw6om no solution yet. Please let me know if you find it

[@mayachalabi6757]

@@christoprinsloo5096 Have you find the solution??

[@Tony-cw6om]

@@mayachalabi6757No actually, When I power on it automatically goes high and espcam takes pictures for about 30 ec and then it is going low and esp also stops taking pictures, from this point it works good ( takes pictures only when motion is detected). And another problem is that if we see in the progrma there are delay's right so when i gave a motion and remove it immediately it took 3 pictures (even motion was gone).

[@mayachalabi6757]

@@Tony-cw6om I try to change the pir sensor I put the mini one it’s getting better you can try it

[@prakash52kar]

ESP working. I have given high to 13 and it stopped taking picture but Take picture button does not take picture also not getting notification

[@farhanasamani8317]

Same esp32 main ek aur code upload ker sakte hai kya (for storing image to the microSD card) two programs ek sath work ker sakta hai kya? Plz sir reply me

[@TOKARTHIKAA]

Is any way to increase energy in blynk app to enable the notification in it?

[@letanat8966]

Please help me use esp32 cam to both record live video while taking pictures saved on memory card

[@ramsabarish9011]

Instead of power bank can we use mobile charger for the input power?

[@TechStudyCell]

Yes

[@SudiptaDey06]

Excellent

[@TechStudyCell]

Thanks

[@neetusrivastava6305]

Do we get picture and notification if we are anywhere in the world

[@mohammedsalifu6248]

Please I want complete circuit how much please

[@vvmauryacreation1920]

Sir your project &tutorial best please make Hindi language tutorial

[@andregohrmann7008]

Really cool project !!! I have a problem that the configuration repeatedly takes pictures. Like in a loop. I have embedded the exact same hardware, library and board as you described it. SSID, password and the auth token are also correct. Maybe you have a tip on what I'm doing wrong. Many greetings from Berlin!

[@Catu6]

Dear, I have exactly same problem, did you catch any way to fix it.? Greetings from Argentina.

[@mayachalabi6757]

@@Catu6 same problem did you find the solution? And thank you

[@Catu6]

@@mayachalabi6757 Hi Maya. Not yet. I have been testing PIR sensor, replaced it but it not solved the problem. I tried replacing the esp32 board the problem is steel there. I think that its not a hardware problem, so i will try to verify software. In my case all works fine but needs to solve an incontrolable repetition on taking pictures part of the proyect. I will come back to you if I can to solve that.

[@mayachalabi6757]

@@Catu6 same problem here Many thx if you find the solution just send it to me And thx again

[@jakeremedios3632]

Hello sir... is it posible to use multiple or morethan one pir in just 1 single boar?

[@jakeremedios3632]

Single BOARD ..I mean

[@avtech321]

Sir make a cctv 180 degree rotet camera by only esp32cam and 2servo motor control with blynk app

[@rafau8612]

Awesome

[@TechStudyCell]

Thanks

[@rafau8612]

Tech StudyCell thank you! keep sharing your projects :)

[@karthikeyan.c9895]

Bro what is the range of this motion sensor how long it can dedect motion

[@davidhuang4090]

yes i would like to know too

[@karthikeyan.c9895]

Bro plz search and say the answer plz bro coz i am making ur project so i need to know its range plz tell i don't know its range plz

[@Crunchworks79]

For range detection, i suggest using ultrasonic sensors.

[@mahanteshpatildeaf2000]

How much does it cost?

[@virendraparihar6982]

I m looking for motion alarm video recording setup on Blynk

[@TechStudyCell]

Not possible with free plan

[@karish4633]

can i use mobile camera in replace of esp32?

[@MANTechnoChannel]

sir..why when i verify this coding show error compiling for board ESP32 Wrover Module?..

[@nimi6072]

did you get any solution for this error?

[@jefferyduran9852]

Can this be done with video?

[@sonu9999208499]

Sir pls make video on desktop 's vga or hdmi display stream on blynk over internet, like blynk kvm or via esp32cam but dont use camera . use any module that convert vga or hdmi to camera pins like raspberry pi 4 hdmi to csi module thank you sir

[@nfd7034]

Hi bro. I wanted to tell you about the projects you have are very good, I have a problem with the code I get an error. (Camera_pin.h: No such file or directory)

[@sengonandreanpanjaitan4507]

You need library camera_pin.h

[@nfd7034]

@@sengonandreanpanjaitan4507 where i find bro. and 🙏

[@sengonandreanpanjaitan4507]

@@nfd7034 Oke bro👍

[@gottuparthiharichandana3381]

For all these devices how much it costs?

[@amitjain4527]

I Have One Problem :- when I Turn On The Face Recognition Button In The Web Server it Can't Detect My Face and The stream Gets Strucked It Can't Recognise Nor Detect Face

[@waleedsabir5013]

sir whenever i connect the whole circuit it is still showing that device is offline in blynk app plzz help

[@rohiniauti8513]

The clicked images reflect in our gallery?

[@TechStudyCell]

No. You have to take screen shot. You can refer this video kzbin.info/www/bejne/Z2K5Y42wfdWKabM

[@pvrpinnagoda2069]

Can we use this code for Arduino Uno board.?

[@giancarlomejia5496]

hello my friend l like your proyect but i can see blink if i am out home or only is local

[@TechStudyCell]

To see the picture you have to connect your smartphone with same WiFi network.

[@priyanshkumar7597]

camera_pins.h: no such file or directory Showing this eror while uploading the code .....please help

[@nimi6072]

did you get any solution for this error

[@hackergamingff5400]

Hello Bro the is not prefect now that mean premium so any free apps plz bro

[@tejasbansod8665]

Error compiling for board ESP32 Wrover Module. sir ples help

[@nimi6072]

did you get any solution for this error?

[@shortsreels9002]

bro can we recrd the video instead of clicking pics ??

[@niswarthmp5418]

hi I am getting this error : A fatal error occurred: Failed to connect to ESP32: Timed out waiting for packet header Upload error: Failed uploading: uploading error: exit status 2 can you please help me out.

[@nimi6072]

did you get any solution for this error?

[@paragbharadia2895]

wow!

[@himavu3840]

How can add an automatic door for this

[@ankitshah1548]

Is it fine if I use 16 gb memory card???

[@bladex0061]

Can i use touch button instead of motion sensor?

[@TechStudyCell]

Yes.

[@jonfrench6383]

I'm getting Error compiling for board ESP32WroverModule. undefined reference startCameraServer()

[@nimi6072]

hey did you get any solution for this error?

[@dumbitkiller5075]

Hello, do you have a real solution for my problem .... erreur ... camera_pins.h: no such file or directory

[@nimi6072]

did you get any solution for this error?

[@chrisaaa.5422]

Why are we using SSID on wifi password in the code

[@TutorReceh]

how to make ESP32 Smart Home System with telegram bot & Manual Switches ?

[@kasimsayyed0815]

Code main ssid and password add kerke usse ESP32CAM main uploade krne ke baad Esp32 ko power supply dene per woh mobile hotspot se anytime automatically connect hojaega Kya

[@kasimsayyed0815]

Sir plz reply mein jabse mbl check kar raja jo aapka reply aaya nhi

[@TechStudyCell]

yes. you have to use 2 mobiles. one for hotspot another for blynk. All should connect with same hotspot

[@madhumithar1340]

How can I make a spy cam using this ESP32

[@freefireisnowonthevergeofd8182]

I love video.u

[@TechStudyCell]

Thanks

[@gkris514]

Do you sell bro?

[@roscoe3dp470]

can i use a pn2222 or s8050 transistor instead of BC547 as i already have these ? Awesome project.

[@TechStudyCell]

Thanks. Yes you can use pn2222 or any other NPN Transistors. But connect the transistor as per the polarity. In the circuit I have used bc547

[@roscoe3dp470]

@@TechStudyCell Awesome ! Thanks for the swift reply. I'm building it right now.

[@mayachalabi6757]

@@TechStudyCell sir it’s keeping on taking pictures even when there is no motion how can I solve it and many thx

[@MarioJoshua-kc7tn]

Block diagram for this circuit sir ❤

[@aberateklehaimanot9804]

Great,is Blynk app free?thanks buddy for sharing this vid.

[@TechStudyCell]

Yes. For this type of small projects Blynk is free

[@100uno100]

Excellent !!!. When you have time, can you implement an application for Alexa / Google? Thank you very much for your work!!!

[@TechStudyCell]

Will check. Thanks.

[@100uno100]

@@TechStudyCell Ok, I have seen it!!!!. Thank you !!!!!

[@ablebabu]

Camera pin .h no file or directory,i am getting this while compailing

[@nimi6072]

did you get any solution for this error?

[@LEKrisnaganthSV]

Bro should we be in the same network

[@TechStudyCell]

Yes. Otherwise you will only receive notifications

[@nurfarahizzati3839]

help me. i cannot open the source code 😔

[@karthikeyan.c9895]

Bro port combo is not coming plz reply mee plz bro

[@ashutoshpeshwe1992]

Can i use 9 volts battery as supply?

[@TechStudyCell]

Yes. But with 7805 voltage regulator.

[@ashutoshpeshwe1992]

Ok sir thank you, I have given 5v supply but the pir sensor heats up rapidly and don't send image .... What shall I do

[@TechStudyCell]

Check the connection and voltage rating of our sensor.

[@MrNixified]

Pls upgrade this project to view the picture even the cellphone is connected via Data or other wifi connection. Thanks

[@smilykittu]

Hai, you can do it here github.com/Rkcreativeworks/esp-cam-nabto

[@naimishrishu3255]

Can i use 9v battery ?

[@TechStudyCell]

I will not recommend. As it will drain out very soon.

[@tejasbansod8665]

Can we add Alarm on it

[@TechStudyCell]

Yes

[@tejasbansod8665]

Can you please tell me the Alarm and how to add Alarm please

[@tejasbansod8665]

Sir how to work with new updated blynk app

[@farhanasamani8317]

Sir esp32 main wifi connectivity kaise hoga Mobile hospot se wifi connect ker sakte hai kya esp32 main ssid and password provide kerke

[@TechStudyCell]

You have to use 2 mobile. one just for the hotspot. second mobile (Blynk App) and ESP32CAM should be connected with same hot spot.

[@farhanasamani8317]

Thank you sir

[@farhanasamani8317]

Esp32 hotspot se connect hua hai ya nahi yeh hame kaise pata chalega ? plz sir reply me

[@TechStudyCell]

After programming, remove the GPIO0 and GND connection. then you can check from serial monitor.

[@farhanasamani8317]

Thank you so much sir Now its working

[@joshuaoribia5977]

Code?