ESP8266 Make your own LED control web server in Arduino IDE | IoT project

Day by day IoT devices are increasing. Because it gives you comfort, You can literally control any device from anywhere. You just need an internet connection or at least you should be on same Wi-Fi network. It is very convenient to do simple task like turn ON light or OFF light with our smart phone. You can build your own IoT home automation with this tutorial. You may want to build a IoT project for college, school or university. In this tutorial we will see how to make ESP8266 web server which will control LED. We can control LED from any web browser on laptop, PC or Mobile phone by using same WiFi network. Once you learned this you will not only able to control LED you can literally control anything from light, fan, AC to big machines in factory.
If you want to support my video please buy any product through my amazon affiliate link. I will receive a commission, at no extra cost to you.
LIST OF COMPONENT (affiliate links)
amzn.to/2Uo7M93 (NodeMCU ESP8266 12E)
amzn.to/2vSpUON (LED)
amzn.to/2wxPmWz (Breadboard)
amzn.to/2vJ3lvo (Jumper wire)
amzn.to/2vmSK8l (Resistor)
Song: Spectre
Artist: Alan Walker
Licensed to KZbin by: UNIAO BRASILEIRA DE EDITORAS DE MUSICA - UBEM, LatinAutor, ASCAP, BMI - Broadcast Music Inc., Sony ATV Publishing, LatinAutor - Warner Chappell, Warner Chappell, LatinAutor - SonyATV, EMI Music Publishing, and 21 music rights societies

[@wupuchim]

Beautiful tutorial. Not so long, in English language, really easy to understand, with logical steps. And of course, with 100% authentic tutorial music. 10/10.

[@muhtaraldbis6318]

from where we can get the code ?

[@lexaradzevich5086]

Could you please write all the code separately, I want to make this kind of work???😊

[@arcana_kaenz7345]

Muchisimas gracias hermano, vi como cien videos de como programar esta cosa, aparte de que ninguno daba el codigo (o en varios casos lo vendia), no explicaban de manera concisa y sencilla, pero gracias a dios que encontre tu video, en verdad muchas gracias.

[@josephsumel2855]

Hello, I want to thank you very much for your tutorial and contribution for those of us who are learning and starting in this matter, I looked a lot for something like that and yes I found many, but nothing like your tutorial. Without words you explained it perfectly, very well understood and everything worked perfectly, thanks for sharing, you won a new subscriber. Greetings master.

[@haroonnaseem1]

What if your Module is behind the NAT you wanna control it from any remote location???

[@VorrachitChanchiewvichai]

Best tutorial so far

[@kennethfajardo5121]

hello Sir, may I ask if it can automate the lighting on and off of the bulb even without connecting to the same wifi? or does it have to be a local wifi to work?

[@fustibal]

Hi there, I am a web developer and I need to build an web app that talks to a (lights controller) via json or ajax. Do you know anything of this. By the way your project put alot of things in prospective for me. Keep up the good work!

[@atoztv22]

OMG Why didn't I see this earlier

[@ewncilo]

does this project requires to have WIFI already pre-installed at your home?

[@Pawanhatwar-fb9lw]

Plz provide the code

[@modnar6865]

It just says "connect to wifi" infinitely on the serial monitort

[@msaeedanwar9495]

Very nice and knowledge able vedio.

[@pendekarsoldersmamsevensby2939]

Very Good, nice tutorial

[@WsM_TECH]

I managed to make this but how do I get rid of the delay thanks

[@zezocaplays7649]

how to make this with esp32??

[@samjio9776]

Yellow LED is not working, while rest 2 is working

[@melodymorillo8471]

And the connection diagram?

[@priyanshumudgal5757]

hii I need the code you used in this video how do i get it?

[@robertobrito4559]

hola amigo realice todo al pie de la letra y no me funciona que sera?????

[@aylienz28ch73]

Thanks for the videos

[@akargamer]

I cant add more button why ????

[@hans-dieterjung4026]

Thanks for the Video, it gives me a lot of new ideas.

[@khushboogupta2002]

You have the code of this project

[@saiakkar4249]

Sir agar button Kam naii kar rahe to kya kare sir urgent he

[@sktech7579]

Great tutorial.keep up the good work

[@themaker3683]

What is the color code of the resistor

[@Dr.RamKumarSoni]

WHERE IS CODE FOR THIS SETUP

[@itikavats_3186]

CAN I GET THE CODING FOR THIS PROJECT?

[@GeorgMierau]

The source code is on his website!

[@muhtaraldbis6318]

​@@GeorgMierau I couldn't get it could you paste here please

[@rapify0]

nice

[@evilmode100]

why ppl put music and LOUD during tutorials....

[@darshio8307]

Why not

[@evilmode100]

@@darshio8307 Because if i want to listen music i know what to type in the search. When i watch a guide its different.

[@SandaruwanAbhayarathna]

great

[@flipdevogel8019]

heef u de code ino voor mij

[@timothyhassett9342]

soundtrack

[@navin7088]

please help me

[@navin7088]

i cant get my ip address

[@learnwithjai1489]

Ya Mee to

[@ybyinventor2211]

In serial monitor change bandwidth to 115200 baud and choose Both NL &CR option

[@terrynicholson9561]

@@ybyinventor2211 not working, its just jibberish

[@vishopsingh2074]

whenever i upload the code it shows this and serial port also doesnt work - Variables and constants in RAM (global, static), used 30004 / 80192 bytes (37%) ║ SEGMENT BYTES DESCRIPTION ╠══ DATA 1504 initialized variables ╠══ RODATA 2596 constants ╚══ BSS 25904 zeroed variables . Instruction RAM (IRAM_ATTR, ICACHE_RAM_ATTR), used 60267 / 65536 bytes (91%) ║ SEGMENT BYTES DESCRIPTION ╠══ ICACHE 32768 reserved space for flash instruction cache ╚══ IRAM 27499 code in IRAM . Code in flash (default, ICACHE_FLASH_ATTR), used 249220 / 1048576 bytes (23%) ║ SEGMENT BYTES DESCRIPTION ╚══ IROM 249220 code in flash

[@Imad52577]

bro did you find the solution

[@ThirumalaGudivada]

from where we can find the code?