How to Replace the Door Seal on a Samsung ecobubble Washing Machine

[@ThatChrisGuy]

The job is quite a bit more involved than I was hoping but the process was perfectly explained by El. Thank you!

[@eSpares]

Hi, thanks for your comment! We're so pleased you found our tutorial useful and was able to fix your washing machine!

[@stepheninman2110]

Such a clear and concise presentation. Current TV presenters should watch this lady, they might learn something . Well done and thank you!

[@eSpares]

Hi Stephen, thank you for your comment here! It's good to know you appreciated this video.

[@MikeSmith-rd3hp]

WOW! Thank you x 1000! I have just managed to replace the gasket on my Samsung machine after watching your incredibly clear and well presented video! This is well within the reach of anyone reasonably comfortable with taking stuff apart and putting it back together, but I wouldn't have known that or attempted it without the confidence this excellent video provided. For my specific machine, a WW90TA046TT/EU purchased in March 2024 - here are some comments / differences which might help others: 1) I didn't need to tilt the machine to remove the bottom front panel screws, it is possible that the inconvenience of bending low and having to get your head near the floor is less risk than tipping the machine backwards. It also meant I could leave the machine fully plumbed in - it only came out of the recess enough to get my hands in to remove the screws holding on the top panel. 2) It was easier to lift off the front panel and hold it close to the machine before removing the door lock assembly, and in reverse easier to refit the door lock assembly to the panel before lifting the panel back on. Just don't move the panel away from the machine until you've unscrewed the lock assembly, as the wires aren't too long. This avoids the need to grope about down the side of the drum to reattach the assembly, and risk disconnecting the wires when doing so. 3) The screw on my inner clamp did turn anti-clockwise to undo - it was just a standard nut/bolt, different from your example. 4) It was helpful to take the gasket off the front and the drum very slowly and watch exactly what part of the gasket interlocks with the drum / front panel. It then made more sense when replacing it, so I was confident it was in exactly the right position. 5) Getting the gasket easily over the lip on the drum side was tricky due to the two large concrete weights bolted onto the drum. I felt I might have not completely fitted the gasket correctly, or damaged it when reattaching the wire seal. However with the correct sized socket / ratchet it was possible to take these off, making it SO much easier to get the gasket on and re-fit the inner clamp, before refitting the weights. They are very heavy, but so don't let them drop on ceramic tiles! 6) The replacement part (which was sourced elsewhere) had a small tube and inlet at the top of the gasket which is presumably for some feature on a similar machine. It's designed to accept a pipe on the top. On my original gasket there was a hole marked for such a fitting, but the fitting wasn't there, despite the parts having the same part number. I sealed the top end of the tube with electrical tape, just in case water would ever get up there and leak out. Thanks again for such a great resource!

[@eSpares]

Hi Mike, thanks so much for your great comment and feedback for this video...it's so good to know that our video was the reason you decided to replace your door seal yourself! Well done for completing the repair, and thank you for your detailed advice for people that might have the same type of model as your washing machine.

[@davidpepper3203]

Absolutely brilliant demonstration, clear, concise, well paced. The prospect of replacing the seal was frightening me off, ( I had a failure with a tumble drier!) but now I understand what needs to be done! Thank you!

[@eSpares]

Hi David, thanks for your comment. This is great...it's so good to hear that you are going to replace the seal yourself with help from our video!

[@cassiodios]

Took me 1hr alone to fit the inner side of the rubber ring, but this is more because of my clumsiness and big hands. Rest worked straight forward. Seal replaced, machine works fine. Thank you very much.

[@eSpares]

Hi, thanks for your comment, it's great to hear this video has meant you were able to replace the door seal on your washing machine. Well done for doing the repair yourself!

[@petervincent393]

Absolutely prefect! Very clearly explained and demonstrated. Helped me do the job with ease. Well done!

[@eSpares]

Hi Peter, thank you so much for your comment! Really pleasing to know that you followed our video to repair your washing machine yourself, well done!

[@MandoTheMalinois]

Awesome, extremely clear explanation. Took me probably five minutes longer then the video. Thanks!

[@eSpares]

Hi, thanks so much for your comment here, it's great to hear that our video has helped you to complete the door seal replacement on your washing machine!

[@IHR67]

Thank you for posting this video, it enabled me to change the door seal on my Samsung wf70f5e2w4w. One comment - on my machine, the inner spring screw thread slackened off due to vibration. I would highly recommend anyone doing this repair to use some ‘Threadlocker’ glue when tightening up the inner spring screw (see minute 6:46 in the video).

[@ArrowFunction]

Wow, just did this and already have a wash on after just 30mins. Fantastic video, many thanks!

[@eSpares]

Hi, thanks so much for your comment. It's great to hear you have your washing machine up and running again, glad our video was able to guide you through the repair!

[@ThePyronetics]

Thanks to this helpful video , I changed my washing machines damaged door seal myself and saved on service bill. Nice work !

[@eSpares]

Hi, thanks for your comment here. Well done on fixing your washing machine yourself, we are pleased our video has helped you to do it!

[@katrinakirby5681]

@@eSpares I fixed it in 29 minutes

[@weaselspod9569]

Great instructional video. Very easy to follow and understand. We had a slightly different version where the cables were too thick on the control panel and fixed to the side of the machine. We couldn’t pull it out and place on top. Just made it trickier to get front panel on and off. Also ours had white plastic clips on the front panel which kept popping out! Also the door lock was attached by an electrical cable. When we put the front panel on we attached the door lock on first which made things easier.

[@eSpares]

Hi, thanks so much for your comment here and for letting people know about the differences you found with your washing machine. Well done for completing the repair yourself!

[@JasonTrussell-g5d]

Thank you so much eSpares and your very good video, my replacement had some harsh words muttered but your segments and explanations were top class - thank you!

[@eSpares]

Hi Jason, thanks so much for your comment here...we're so glad that our video helped you with being able to replace the door seal on your washing machine yourself! Well done for completing the repair.

[@BuggeredifinoD]

Excellent video. Clearly and calmly explained. I’m currently standing, watching a towel go round and round in the machine with a warm sense of satisfaction. Just one suggested edit: at 1:15 when she says “you can pop the top panel off like so,” what she means is “do a spot of limbering up and a few stretches because you’re going to have to pull like a crazy man to get the top panel off.” Otherwise 10/10. Thanks!😁👍🏻

[@royc9357]

My door seal was ripped due to a broken drum spring- you should check when you take the top off the washer. They are easy to see big springs that hold up the drum. One on each side - worth checking whilst repairing the door seal- Great clear guiding video- Thanks ❤👍🏻

[@eSpares]

Hi, thanks so much for your comment. It's great to hear that our video has helped guide you through the door seal replacement, and thank you for your suggested advice regards the door springs.

[@mohammadharoon9546]

Dont know a thing about washing machines, followed this step by step and fitted the new seal, thank you very much, straightforward, concise and ultimately a life saver!

[@eSpares]

Hi Mohammad, it's great to hear that this video has helped you to replace the door seal yourself! Well done for completing the fix!

[@easzyish]

Thanks very much. That was a simple and straightforward explanation. I just finished changing mine and my wife is very happy…

[@eSpares]

Hi, thanks so much for your comment. Glad you have been able to follow this video to fix your washing machine!

[@joewilkinson8698]

Fantastic video! Was really anxious about having to fix this myself as my partner had just suggested replace the whole unit. Ordered the right parts and got stuck in with this great tutorial, thank you very much 👍🏻

[@eSpares]

Hi Joe, thanks so much for your comment. It's really great to hear that our video gave you the confidence to tackle this door seal replacement yourself! Well done on completing the fix!

[@jamesleigh2844]

This is the one...spent ages faffing trying to get the new one on without getting the door off like other videos. But this makes it so clear

[@eSpares]

Hi James, thanks for your comment here! We're pleased to have been able to help you fix your washing machine...well done on completing the fix!

[@allmenon]

Two years later and this video is still great. Just changed the seal with the help of this video. Perfect, thank you!

[@eSpares]

Hi, thanks so much for your appreciation of this video...glad we could help you complete the seal replacement, well done for fixing your washing machine yourself!

[@markkunath8440]

Great video - so clear. I had a few issues getting the inner seal retainer undone. Had to use a 7 mm socket on the screw as didn’t have the angle or strength to unscrew it! Everything else worked perfectly, thank you so much :)

[@geert-janromers5883]

Thank you very much for the video. Really good guidance. I replaced the seal effortlessly. I wish every tutorial was as clear as this tutorial!

[@eSpares]

Hi, thanks for your comment, it's really good to hear that our video was easy to follow! Well done for fixing your washing machine yourself.

[@guillaumequintin]

Thanks my lady. Just a thing : a LOT of cables where preventing me from removing the control panel and the front door. I had to deal with very little space, abd the things getting in my way, without unplugging everything (obviously not meant for). Appart from this: very nice and clear tutorial. Best regards from France

[@eSpares]

Hi, thank you for your comment. Nice to know that you found this video helpful! Well done for fixing the washing machine yourself.

[@terrynattress5262]

Yes, good video guide, but needs editing to explain about the cables, as she didn't seem to have a problem placing the control panel to one side. It can't be done without removing the cables. Saying that, they are easily removed and obvious where they go back onto.

[@The_Other]

I managed to pull this off with the help of the very clear instructions in this video, thank you :)

[@eSpares]

Hi, thanks so much for your comment...well done for completing the seal replacement yourself! Glad eSpares could play a part in helping you!

[@mickythinn7437]

Thanks for the clear video instructions. Replaced the seal with ease :)

[@eSpares]

Hi, good to hear that you have been able to fix your washing machine! It's great to know our video helped you.

[@Captainmattwebb]

Awesome video. Really clear and made the process simple. I was dreading this but it wasn’t too bad at all

[@eSpares]

Hi Matt, thanks for your comment here...well done for completing the door seal replacement! It's great to know our video has helped you with this fix!

[@CarlBradfield-j5d]

A really clear and easy to understand step by step guide. Saved us some money, thank you 👍🏻

[@eSpares]

Hi Carl, thanks for your comment here, it's great to hear that your were able to easily follow our video guide...well done for completing the fix yourself and saving money!

[@Hayley-tg7ge]

You saved my life ! I followed your instructions and replaced it within two hours Thank you so much for making the video

[@eSpares]

Hi Hayley, thanks so much for your comment. It's brilliant to hear that our video has helped you fix your washing machine yourself!

[@parvezhasware5232]

Great step by step video, really helped and has meant I've avoided having to go and shell out for a new machine.

[@eSpares]

Hi, thanks for your comment. Nice to hear that you found this video so helpful! It's great to know it has helped you to replace the seal yourself.

[@jamesleveigh9379]

Excellent video - followed it step by step amd was finished in 30 mins. Many thanks - saved me a bundle.

[@eSpares]

Hi James, it's so good to hear that you followed our video guide here and were able to repair your washing machine yourself! Well done!

[@cm5985]

Why the hell would Samsung make it so difficult just to change the door seal? Ridiculously labour intensive for what should be a 5 minute job. It's almost as if they don't want you to fix anything...

[@orwhat24]

Amen.

[@Bergamot88]

I just did it. It wasn't a big deal

[@SojournersPerspective]

Uh, so that you would buy a new washing machine instead.

[@STEPHENWOLFENDEN-y9j]

Very good instructions managed to put my replacement rubber door seal on without a hitch thank you

[@eSpares]

Hi, thank you for your comment. It's great to know that our video has helped you fix your washing machine! Well done on completing the fix yourself, and getting your washing machine going again!

[@johnnylawrence9329]

Thank you for this fantastic video! Saves us a couple of hundreds and a lot of frustration we'd get if we would have skipped the removal of the front panels. Superb!

[@eSpares]

Hi, thanks for your comment. We love that you appreciated our video so much, and so glad that we have helped you to replace the door seal on your washing machine!

[@alanmcnamara7643]

Thank you for the excellent guidance to replacing the seal on my Samsung ecobubble. Job done ✔️

[@eSpares]

Hi Alan, thanks so much for your comment. It's great to hear that our video has helped you to replace the door seal yourself! Well done.

[@Carrier-Bag]

Thank you so much for this video, quite a lot to it but you made it simple and easy to follow. 😊

[@eSpares]

Hi, thanks so much for your comment. It's really nice to hear that you were able to follow this video to replace the seal yourself...well done for completing this repair yourself!

[@tfrowland]

Fitted mine on a slightly different model, but clear and concise instructions were easy to adapt.

[@eSpares]

Hi, great to hear that you were able to complete the seal replacement with the help from our video! Well done for doing the fix yourself!

[@Krntje]

Did it with the help of this video 💪 Had to work around the control panel because I couldn't detach it but it worked. Thanks!

[@georgeyoung9072]

Our ecobubble machine was a slightly different model but I was still able to use these instructions. Much easier than trying to replace the seal with the front panel still on. Differences were: - The control panel wouldn't budge until I reached under it (from the top) and freed all the tabs under it as well as the ones on top. Also had to undo the clips holding the cables in place to all it to be placed on top of the machine . Take note of where these need to fix back on. - There is a hose which fastens to a pipe at the top pf the seal. This needs to be removed by using pliers (or brute force) to loosen the clip (by pushing the two tabs together) and then slide it up the hose. The pipe on replacement seal was different and I had to decide whether to use that one (it had no ridge to keep it in the hose) or replace it with the original (which can be removed from the old seal). I decided to use the new one, replaced the hose clip and so far have seen no leakage anywhere but I've kept the original part just in case. - Pay attention to which way the door lock goes on. My machine had no switch to stop you putting it back the wrong way around... Apart from a small panic when I couldn't free the control panel, this went pretty smoothly. Pay attention to the small details of how the demonstrator does things in the video; especially getting the seal onto the rim and putting on the external clamp. There is a knack to both, but once you have worked it out, it is relatively simple. However, it did take me well over an hour rather than the 15 minutes of the video. Thanks eSpares!

[@eSpares]

Hi, thanks for your comments here. We're glad you were able to use our video to help you replace your door seal. Hopefully your comments can be of help to other people that have a model like the specific one you have.

[@darrenlemons1547]

My door seal has just perished so I’m going to change it myself with your help thank you just need to get a New seal from your site 👍

[@eSpares]

Hi Darren, it's great to hear that you are going to replace the door seal yourself, and we are pleased that our video has given you the confidence to fix your washing machine!

[@danthomas8398]

Great video. Was able to follow this with some slight variances on my WW80J5555FA and no more leaks! Thank you ❤❤

[@eSpares]

HI Dan, thanks so much for your comment here...it's great to hear that even though you had a slightly different model, you were still able to follow our video to replace the door seal! Well done for fixing your washing machine yourself.

[@tonycarr3065]

Fantastic! Fixed my gasket by following your guide step by step

[@eSpares]

Hi Tony, this is great news! Well done for completing the replacement yourself, we are glad our video gave you the confidence to repair your washing machine to keep it going while saving money from a call out or new appliance.

[@stdavidboy]

Thank you very much 10 out of 10! Will keep your number handy for spares.

[@eSpares]

Thanks so much for your comment here, it's great to hear you found this video so useful. Hopefully it helps you to replace the seal on your washing machine.

[@JayXDrums]

Very useful video. Thank you. Quite a few steps for something perishable, as others have commented. But you made following them very simple.

[@eSpares]

Hi, thank you for your comment. It's nice to hear that we show the process for this replacement in such an understandable way, so you can repair your washing machine yourself. Well done for doing the fix yourself!

[@russ623]

Well done! The wife will still want for a new washing machine but I can still ask and save some money. Also need to consider if a 7 year old machine is worth it with the cost of the spare part and time to repair. Thank you.

[@eSpares]

Hi there, thanks for your comment. We hope our video has given you the confidence to have a go at the repair yourself.

[@russ623]

The wife got her way. New machine ordered and delivery on Saturday! Thank you anyway for your help.

[@timsmith-ix8wj]

great instruction, the wires are a bit fiddly but got the job done and call out saved, cheers

[@eSpares]

Hi Tim, thanks for your comment...it's great to hear you have been able to replace the door seal yourself and save money on a potential call out. We're pleased our video was able to guide you through the repair!

[@scottwilliamson4436]

this is a great video. very clear. helped me fix a leak in my machine caused by the door seal being loose. Thanks!

[@eSpares]

Hi Scott, thanks so much for your comment...it's great to hear you appreciate our video, and brilliant to know that it helped you fix your washing machine yourself - well done!

[@funkyiceman]

This was an outstanding tuition video that helped me install a new seal- thanks so much!

[@eSpares]

Hi, thanks so much for your comment here...glad you appreciated our video, and well done for completing the door seal replacement!

[@LuckySpence]

Perfectly explained. Thank you

[@eSpares]

Hi, thanks for your comment, it's great to see hear our video explains the fix so well...hopefully it now helps you to replace the door seal on your washing machine!

[@lizcliff8134]

Thank you so much for this video everything explained so well. Took me a lot longer to do it, but it was my first time, and I'm feeling quite proud of myself 😁

[@eSpares]

Hi LIz, thanks for your comment here...it's so good to know that our video gave you the confidence to replace the door seal yourself, and you should rightly feel proud of yourself! Thank you for subscribing, hopefully our large range of videos can help you if ever you need to fix any of your appliances in the future too!

[@jacobmorgan8215]

Thank you for making this! Just fixed my washer :)

[@eSpares]

Hi Jacob, It's great to hear that you have been able to fix your washing machine with the help of our video! Well done on completing the fix, if you have any other future appliance issues hopefully we'll have the video to help.

[@conz078]

Thank you for this was much easier than I thought it was going to be!

[@eSpares]

Hi, thanks for your comment. It's great to hear that you have replaced the door seal yourself with the help of our video! Hopefully your washing machine is working brilliantly now.

[@devo7517]

Thanks for the viseo. Replaced seal about to turn on 🤞

[@eSpares]

Hi, thanks for your comment...great to hear that you have followed our video to complete the seal replacement. Well done for completing the repair yourself!

[@Val-f7v]

Watching your video about fitting door seal.. I cannot get the top off. I have unscrewed at the back but the top will not just slide back like on the video. Its well and truly stuck. Any advice?

[@godzuks]

Fab easy concise, right I off to replace the seal..thank you 😎

[@eSpares]

Hi, thanks so much for your comment. It's great to hear that you found this video useful, and are using it to complete the repair yourself! Check out the eSpares website here, for our range of Samsung washing machine door seals: www.espares.co.uk/search/ma596pt1564/washing-machines/seals/samsung

[@christopherkeogh5337]

Does the front door spring go round the metal Grove?

[@deniseburrell6125]

Brilliant instructions and was easy to do. Thank you very much

[@eSpares]

Hi Denise, thanks for your comment. Hopefully our video has helped you to replace the door seal on your washing machine...well done for fixing your appliance yourself!

[@christianb344]

The job was a lot more than described but had the full jist of the job. A lot more wires on the control panel thats shown in the video. The door didn't come off fully because of attached wires. To get the rubber on I had to remove the concrete blocks. A job I thought that was going to take 10 mins took 2 hours. A rusty screw on the bottom didn't help that I tried drilling out which I then ended up grinding off. The video is very helpful but beware it is a lit trickier. Happy though saved me a 100 call out charge.

[@eSpares]

Hi, thanks for your comment here, and for sharing your experience with how this repair was for you. It is very possible that there will be some differences in the process for some people, compared to what we have in this video, as some models can be different in how they are constructed. It's great to hear that our video was still able to guide you, even though your washing machine model is different to the one in our video.

[@tonygatter]

Perfectly explained 👍 made fitting the new seal straight forward.

[@eSpares]

Hi, thanks for your comment. We appreciate that you found our video so well explained, and it's great to know that it has helped you to fix your washing machine yourself. Well done on doing the repair!

[@johnfraney]

Would a faulty rubber seal be the cause of a wobbly inner drum as the bearings seem to be ok?

[@josephzeina2681]

I followed you step by step, job successfully done, thank you.

[@eSpares]

Hi Joseph, thanks for your comment. It's great to hear that our video has helped you to replace the door seal on your washing machine yourself. Well done for completing the fix!

[@samunbhatia]

please make for top loading machine as its not available anywwhere here

[@rickyhutchings2263]

Great video well explained and straight forward even my wife could do this 😅

[@eSpares]

Hi Ricky, thanks for your comment. It's great to know that our video gives you the confidence to fix your appliance instead of replacing it!

[@rickyhutchings2263]

@eSpares just need to change the drum bearings and seal do you have a video on replacing this .many thanks

[@monoorollahi9777]

Perfect instructions. Very clear. Thank you :))

[@eSpares]

Hi, thanks for appreciating our video. Hopefully it helps you fix your washing machine yourself.

[@G0WZB]

Excellent tutorial, Many Thanks

[@eSpares]

Hi, thanks for your comment. Hope you have been able to replace the door seal with help from our video, and your washing machine is working great!

[@donnastokes496]

Brilliant review really helped us loads thank you 😊

[@eSpares]

Hi Donna, thanks so much for your comment. It's great to hear you found our video so useful, and hopefully we have helped you replace the seal on your washing machine! Well done for repairing your appliance instead of replacing it.

[@donnastokes496]

Yes it was brilliant step my step. I've had my machine since 2016!!! Always replace until I can't!! Ty again

[@robbiemacdonald777]

Great tutorial, thank you.

[@eSpares]

Hi Robbie, thanks for your appreciation of our video. We hope it has helped you to fix your washing machine, and it is up and running well again!

[@jawadjamshidi9749]

You are Natural, thanks very much for sharing your skills. Very useful. I really really appreciate it. Thanks very much❤❤❤⭐️⭐️⭐️⭐️⭐️👌

[@ZHeiTPRo]

Thank you so much, this video saved my life ✌️

[@eSpares]

Hi, thanks for your comment. Well done for fixing your washing machine yourself! It's great to hear that our video helped you to keep your washing machine running.

[@PJSutton-s1u]

Well explained. Unfortunately the design of the Samsung Eco Bubble is an absolute nightmare. I have watched videos for three other makes of washers and none of them require taking off the front and control unit. The two top front screws in my unit won't come off, even using a power drill, so I can't replace the seal. And the inside metal parts have sharp edges - I cut both my hands trying to follow the video. I will never buy another Samsung appliance!

[@davidf223]

Lol yeh my finger was bleeding for hours 😢

[@dudmad1]

Same, not all eco bubbles are the same. Like you I cannot take off the front panel as top 2 screws cannot be taken off!! So will have to try and do this from the inside. My make is WF70F5E2W4W/EU

[@dudmad1]

I now need to correct this. Taking the front off is the only sureproof way of fitting and successfully replacing the seal. Another video I saw informed me that 2 of the back plate screws may be solid, only way to take these off is by using a socket connection. I’ve now successfully replaced the gasket but now need to purchase a new outer gasket seal clamp wire as existing one I just cannot stretch. Took me hours and very sore hands but still worth doing yourself.

[@lizcliff8134]

I have just replaced mine, the screws didn't come off either I had to use a spanner to get then off instead.

[@ThePepperford]

Wow on the best tutorials I have seen. 🎉🎉🎉🎉🎉

[@eSpares]

Hi, thanks so much for your comment. We hope our video has helped you to fix your washing machine yourself, and it is back running with a nice new door seal!

[@malachiwatch9509]

would this work for model ww85t504dae/sa ?

[@eSpares]

Hi, thanks for your question. This video is a guide for Samsung ecobubble washing machines, but processes can vary in places from model to model.

[@KingaaKowalczyk]

Hi, we did it yesterday , but today During the spin it starts to make some noise and the smoke comes from the drum 😮 do you possibly know what we could do wrong?

[@eric6194]

top video very well done. thank you!!👌

[@eSpares]

Hi, thanks so much for your comment, hopefully we help you to replace the door seal on your washing machine yourself!

[@paulanderson8863]

Spot on Tutorial. If I was a young man I would want this lady for my wife. Puts a lot of us to shame

[@terrynattress5262]

I'm doing this right now and getting the door sprung clip on is no way as easy as shown. I can't even stretch it enough to get it around the rim. Is what I have, a stronger spring that can only be factory fitted? Two of us have even tried, but it just won't stretch enough. To put it on easily with one hand is near impossible.

[@Bergamot88]

Stretch it out a bit

[@googissoftware]

Thanks! Clockwise turning to release!

[@eSpares]

Hi, thanks for your comment. Yeas a little different to the norm for that bit of the process isn't it. Hopefully our video has helped you to complete the fix yourself, and your washing machine is now back up and running!

[@Val-f7v]

We cannot get the top off. She makes it look so easy, but guess that machine is brand new . It is well and truly stuck.. any advice .. unscrews two back screws but the top will not budge backwards at all

[@cees9314]

Excellent video and love your voice

[@eSpares]

Hi, thanks for your comment. We hope our video has helped you to replace the door seal on your washing machine. Well done for repairing your appliance instead of replacing it!

[@WahidGhazanfar]

Great work

[@eSpares]

Hi, thanks so much for your comment! Hopefully it helps you to replace the door seal on your washing machine now! To get a new Samsung washing machine door seal, check out the eSpares website: www.espares.co.uk/search/ma596pt1564/washing-machines/seals/samsung

[@sultanmahmood292]

Struggling to get the top off after removing the 2 screws, try some force but still the front part of the top not budging? any help

[@aaronjwright]

Me too I've got the model WS90j6410CX, can anyone help?

[@Val-f7v]

Did you get yje top off eventually? We are struggling.. failed at the first hurdle

[@JonEckert-dz9kz]

Brilliant, well explained

[@eSpares]

Hi Jon, thanks for your comment, we appreciate that you found our video well explained. Hopefully it helps you to replace the seal on your washing machine yourself.

[@diegohi92]

Muchas gracias! Pude hacer el reemplazo por mi cuenta y sin problemas posteriormente 🙌🏽

[@JimTheGlawsFan]

Does the drum drop with the seal removed? I'm unsure if there is an issue inside the drum that's caused it to drop and damage the seal, or if the seal being damaged has meant the drum dropped. All the small pieces of rubber from the seal completely blocked my drain valve, so that needed emptying and the hose removing to get all the debris out.

[@mickythinn7437]

The drum doesn't drop with the seal removed. Have you checked the springs that hold the drum in place?

[@elinolden1927]

Thank you 💪🏻💚✌🏻

[@eSpares]

Hi, thanks for your comment, glad we could help you with this washing machine repair! Well done for fixing your washing machine yourself!

[@seagers_studio]

Following along with a slightly different Samsung model and this was a much tougher job that expected. The inner door clamp was so stubborn and hard to get to I had to cut it off and buy a replacement. Thank you for the video but might be worth mentioning this is not a job for beginners.

[@lisasid72]

Thank you very helpful

[@eSpares]

Hi Lisa, thanks for your comment. Hopefully you feel confident in now replacing the door seal yourself. We're glad that we could help you keep your washing machine going!

[@alexgerald540]

Great video!

[@eSpares]

Hi Alex, thank you! We hope you have been able to change the door seal following our guide. Thanks for your comment.

[@ruudjekel9681]

Thank you!!!! 😊😊

[@eSpares]

Hi, thanks for your comment...we are pleased to know that you are able to repair your washing machine with help from us here at eSpares!

[@MsEddie007]

I’m struggling with the outer clamp going on seems too short but it was the original 😮

[@29Freyr]

I feel your pain brother but it finally worked for me when I used her exact hand movements. Notice how she turns her right hand around, elbow pointing away from the gasket, to get more power

[@thegreatiam6849]

The seal for my machine as promoted on the platform in the description os £58. However, I managed to find one on ebay gor £23 😊 Job done within an hour Thanks 😊

[@mattyoghostss]

Thanks for the help, easy as .

[@eSpares]

Hi, thanks for your comment. Good to know our video has helped you. Well done on doing the repair yourself!

[@parmdeeppuri2981]

life saver!

[@eSpares]

Hi, thank you for your comment here, glad you appreciate this video. Hopefully it helps you to now replace the door seal on your washing machine yourself!

[@paula200]

Brilliant - thank you!

[@eSpares]

Hi Paula, it's nice to know our video is appreciated by you! Hopefully you have been able to fix your washing machine with the help of eSpares! Thanks for your comment.

[@craighunter1682]

I can get the retaining spring back on! 😅

[@BigBikeMad-ox8vo]

Brilliant

[@eSpares]

Hi, thank you for your comment. We are pleased to have been able to help you, hopefully you have now been able to replace the seal yourself, which is great!

[@katrinakirby5681]

You helpe me so. Mucth m seal split in Half

[@eSpares]

Hi Katrina, it's good to know our video has helped you out! Thanks for your comment. Hopefully your washing machine is back working correctly for you.

[@MINIZEBS]

you make it look so easy but you don't show how you put the wire all round the seal, thats what i'm having problems with, I've bruise the tip of my thumb trying to get the wire on grrrr

[@systemtim]

they are not a phillips head they are posidriv, there is a difference……

[@grahamjackson1591]

Worst machine i ever owned