Essex #9 Second planking ´stage 2`

[@homeharbour6238]

instagram.com/rp_home_harbour?igshid=Y2ZmNzg0YzQ=

[@Yorkie285]

Your videos are the most informative. Thanks for sharing

[@homeharbour6238]

Thank you very much for following my channel ☺️

[@Yorkie285]

At 9:39 the 2nd planking at the rear of the model has a severe bend, how did you glue and more importantly bend the 2nd planking without snapping? Thank you again.

[@homeharbour6238]

Ok. Got it. When you put "contact" glue on the ship and strip , the strip becomes more flexible, so very slowly you bend it, even if it snaps a bit, not a problem, after sending you will not see a difference

[@Yorkie285]

@@homeharbour6238 I know to use contact cement per instructions, can I use fast grab wood glue for the 2nd planking? Thank you

[@homeharbour6238]

@@Yorkie285 I used contact glue, can't say how good will be using white glue. But you can always do an experiment. This is the way we learn

[@GregWilson635]

Beautiful work !!

[@homeharbour6238]

Thanks mate😉

[@Yorkie285]

Where do you recommend purchasing the Essex? I'm glad I found your videos. Gives me encouragement to build a ship model

[@homeharbour6238]

Thank you very much. I am really happy that you like my videos. Here is a link for Occre website and Essex ship - occre.com/en/products/essex

[@Yorkie285]

Why was on the front 2nd planking one board was spliced?

[@homeharbour6238]

Sorry, what do you mean? It's been a while since I built her...

[@Yorkie285]

If you go to 1:48 there is a solid board that is spliced with another board. Is there a reason why?

[@homeharbour6238]

​@@Yorkie285if you are speaking about the wales, so the top part that is slimmer is just for covering the second layer that was not attached 100% to the wales

[@Yorkie285]

@@homeharbour6238 Thanks for the response back, what is the name of the model kit, I am interested in the one you built. Your videos taught me a lot.

[@homeharbour6238]

@@Yorkie285 this is Essex model by Occur company

[@williamphillips7004]

Your no help what kind of glue? Show how you apply the plank,

[@homeharbour6238]

kzbin.info/www/bejne/b5KYlJV7pN-Sircsi=8BVAcFQ8areJsirB