Establishing LAN connectivity! - Build your LAB Pt.1 🧪

#Establishing #LAN #connectivity #build #your #LAB
Establishing LAN connectivity! - Build your LAB Pt.1:
In this video we will establish LAN connectivity in GNS3 using Cisco and Fortinet images.
How to install GNS3:
• How to prepare GNS3 on...
Configuration applied:
SW1
conf t
no banner login
no banner motd
no banner exec
no banner incoming
line con 0
exec-timeout 0 0
logging synchronous
privilege level 15
no login
interface range GigabitEthernet 0/0-1
channel-group 1 mode active
interface range GigabitEthernet 0/2-3
channel-group 2 mode active
interface Port-channel1
switchport trunk encapsulation dot1q
switchport mode trunk
interface Port-channel2
switchport trunk encapsulation dot1q
switchport mode trunk
interface Vlan10
ip address 172.16.10.10 255.255.255.0
interface GigabitEthernet1/1
switchport access vlan 10
switchport mode access
FGT1+FGT2
config system interface
edit "aggregate"
set vdom "root"
set allowaccess ping https ssh
set type aggregate
next
edit "vlan10"
set vdom "root"
set ip 172.16.10.2 255.255.255.0 set ip 172.16.10.3 255.255.255.0
set allowaccess ping https ssh
set interface "aggregate"
set vlanid 10
next
end
Yours CMD Tech
NSE4, NSE7, CCNP, CCNA-Security, CCNA-Wifi, CCNA-R+S
All Social media links + CMD Shop
linktr.ee/cmdtech

[@CyMDtech]

👍 *Like* this video if you enjoyed it! 💬 *Comment* below to let me know if you enjoy LAB series.

[@waqasahmad6348]

Can you share the fortigat images links here please

[@CyMDtech]

No I can not. Please check my GNS3 installation guide (you will see how to add them there), link in description