Reminded me of free flight competition in 1965 at the Tulsa Gluedobbers AMA annual meet. I placed 2nd in Jr. 1/2A ff with a similar Goldberg design. Trimmed power to the right, glide to the laft.
@joshuawfinn9 ай бұрын
Yessir! These like gliding right but some designs (Satellites in particular) do not do well gliding right.
@ozmazone9 ай бұрын
One of my favourite designs from this period - along with George Fuller's Dixielander
@joshuawfinn9 ай бұрын
Interestingly, the One Design event this year is for both Eureka and Dixielander.
@cstatman9 ай бұрын
wow, just climbs like a rocketship! beautiful plane!
@masonatorgaming6699 ай бұрын
That plane flies really good
@kayeninetwo35859 ай бұрын
Such a beautiful plane! Thanks for the video.
@Tom-wl9sx9 ай бұрын
Beautiful plane and it flies great too 👍
@richh99049 ай бұрын
My dad used a slow burn fuse to tip up the rear. His plane did use the pinch timer. Cox 049 souped up engine.
@joshuawfinn9 ай бұрын
I used to use fuses, still do on a few planes, but RDT is wonderfully convenient. Wish I had tooling to machine the innards of cox engines.
@ericwillis7776 күн бұрын
Thanks Josh, I wonder if it is possible to have RC power duration RET with over driven BLM, and relatively small battery, as it only has to run for short time, for a vertical climb out. Any advice on trimming to achieving near vertical climb ?
@joshuawfinn6 күн бұрын
That's what SAM old-timer LMR competition is. You don't trim for the climb. Just control it on the way up and then go hunt lift. 12 minute maxes usually
@ericwillis7775 күн бұрын
@joshuawfinn Thanks, I'll look it up.
@williamrobinson74359 ай бұрын
I remember these, being British and q old. A v popular plane, and people used to set them up in different ways, eg simple 2 ch radio and an underpowered engine for a Sunday sport model, easy to fly, that kind of thing, but when used as designed, definitely a v competitive bird, and remained so for quite a while.. Most enjoyable! Nice one Josh. 🌟👍
@joshuawfinn9 ай бұрын
Thanks for sharing those memories. It's a fun airplane!
@DUCATI600CC4 ай бұрын
What is the model covered with ?
@joshuawfinn4 ай бұрын
Old Monokote (not the new stuff, it's garbage). If you can't get the old stuff, buy the cheap Hobbyking covering as it is surprisingly good and cheap.
@billkuhl4429 ай бұрын
I found that interesting about the right rudder. I was thinking typically on pylon models the model goes a little too much right under power so requires left thrust?
@joshuawfinn9 ай бұрын
As I recall, I built it with some left thrust. Once it gets going though, it needs right rudder to maintain the spiral.
@billkuhl4429 ай бұрын
@@joshuawfinn I see, as I recall the side thrust most effective right after launch.