Euro Coin modeling in Blender 2.91

[@sgmusic2086]

Gr8....I really like all ur tutorials👍🏽😀

[@MagevoStudio]

Thanks a lot!

[@lr723]

nice tut, ty. except maybe the mirror that gives the bad back face best seen at ~16.45...

[@MagevoStudio]

Thanks. About the Mirror I could have done more with that backface, right.

[@neelamprajapat5406]

Gjb bro 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍❤️❤️❤️❤️👍👍👍👍👍👍👍👍👍👍👍👍👍👍

[@MagevoStudio]

Thank you!

[@funnym0de]

Thank you so much for this tutorial!

[@yandroperu]

#00:51 How to select the entire coin circle

[@shubhamgolle8302]

great work man!!!!!! loved it!!!😍

[@MagevoStudio]

Thank you very much!

[@zo0t]

Could you help me with trying to I guess sculpt a face onto a coin to make a customized coin with a friends face on it?

[@elnative00]

Working on a similar project right now, any luck ?

[@KwameGyanko]

@@elnative00 maybe convert the image to a bump map and use it

[@ahmedamin6005]

Thank you for ur effort but the tutorial is very quick, I couldn't catch the steps specifically that there are buttons that you pressing and also comments you had put. so, I wish it was more clearly steps. thank you anyway!

[@sami023]

this looks great

[@MagevoStudio]

Thanks a lot, Sami A!

[@mdj956]

Very good explained, maybee obverse and reverse version will be more appropriate then mirror one, but I can manege difference. Tx, Mladen, Zagreb, Croatia.

[@Newtz_aw]

good work, love it

[@MagevoStudio]

Thanks a lot!

[@eliteextremophile8895]

I tried to do exactly as you did but subdivision breaks the middle part of the cylinder, creating this "flower" like pattern mixing the gold and silver. When I check the wireframe it has broken the inner rim and creates some sort of unevenly heptagonal faces from it. This is the third time I started from a scratch and yet I get the same result when subdividing. Any idea what I'm doing wrong?

[@MagevoStudio]

You need another support edge there, meaning that you have to make an inset on the face/s where you have the problem

[@eliteextremophile8895]

@@MagevoStudio ah, thanks. I think I missed the point when you made an inset.

[@eliteextremophile8895]

@@MagevoStudio This is absolutely great tutorial/rehearsal for the controls. This is basically my first time doing any 3D modelling and even when this is quite fast, it gives great challenge and introduces well to Blender. Can't stand the very beginner tutorials, how am I gonna memorize every basic control just by going through them lol. I need to do something that has challenge. Great job and thank you for this tutorial!

[@MagevoStudio]

@@eliteextremophile8895 Thanks & have fun learning!

[@andersonvieirasouza1101]

Good evening, if I send you the coin model, do you make the matrix?

[@MagevoStudio]

Hi, not sure what you mean

[@cgdocagroup]

can you give me the texture of the 1 euro coin?

[@MagevoStudio]

All source files are accessible for patreon members

[@l.a.designs9]

this is amazing. do you know if this can be 3d printed with the way you did the bump nodes?

[@MagevoStudio]

Sorry, I missed to see your message. I don't know much about 3d printing but there must be something as bump or relief there too... Thanks a lot!

[@R_FangZ]

Hey, anyone else having trouble with the link in the description? Could I find the same texture anywhere else? I really wanna try to follow this tutorial

[@MagevoStudio]

Hi, I just checked the link by downloading the image and it worked fine for me. Not sure what your problem might be. Maybe trying with another browser will help. I tested it with Chrome and Firefox and it worked. Thanks

[@R_FangZ]

@@MagevoStudio hey, thanks for replying! I think the site was down today because I tried it a few times earlier today but now it works again :D so I'll try to make the coin one of these days :)

[@MagevoStudio]

@@R_FangZ Ok

[@hazdrubal5962]

Would it be possible to add more faces of the initial cylinder later on without starting from scratch?

[@MagevoStudio]

Yes it is, you can select all vertices, then right click and subdivide, you will see that you have more vertices now but the structure is the same. So what you have to do first is to get rid of the horizontal new edges which were created when subdividing. Select the edge loops and press Ctrl+X to delete them. Then, with the Loop tools add-on installed (Go to Edit>Preferences>Add-Ons and search for Loop tools and check/activate it). When done select all the upper vertices of the cyilinder (in Wireframe mode to catch them all), right click>Loop tools>Circle this will create a perfect circle/cylinder shape again. Do the same for the bottom vertices to make them circle as well. Hope this helps, good luck!

[@hazdrubal5962]

@@MagevoStudio Oh, I see, didn't know about this process. Thank you so much for sharing the knowledge!

[@PhiVaGoo]

How would you export the coin model to a game engine and keeping its properties? I removed the lights and surface objects and exported the Blender file to Unity along with the 2 images, but the color of the coin then just becomes plain yellow and grey, and the texture is gone.

[@MagevoStudio]

I have no idea, maybe this will help you: kzbin.info/www/bejne/a4a9XqGfqreKsJo

[@snowman1637]

amazing...👍👍👍

[@christopherobert103]

Hello, I'm a beginner and thanks for this tutoriel which help me a lot. I have a little problem with the texture outside edge of the coin. I had mark seem but because of the mirroir, the texture is also mirrored at the intersection. Have you an idea why? Thanks.

[@MagevoStudio]

Not sure what you mean. The mirror should just be on the outside of the coin, meaning splitting the coin in the middle. I don't understand where you have the mirror, if you explain that in more detail maybe I can help you.

[@christopherobert103]

@@MagevoStudio Hey, first of all thanks a lot for your reply :)! Sorry if I had a bad explanation, I'm french! Each face is well mirrored, so no problem (either the gold and the silver). But on the axis the texture (you named goldout2) is mirrored from the mesh part and the miroir part which render different light from this 2 part. It's at 11:13 from your video. I don't know how I can send you a picture to show you the effect or send you my blender file. May you have a personnal link to do this? Hope it's more clearly for you now! I've jsut seen forward your video that it's very close of what you have at 18:13 but before putting the "wave" effect. Thanks for your work!

[@MagevoStudio]

@@christopherobert103 according to what you said it seems to be a minor problem, but I'm still not sure what you mean. You can make a Screenshot showing your issue and send it to: [e-mail]

[@christopherobert103]

@@MagevoStudio I sent you a mail with the screenshot and also my blend file, thanks.

[@MagevoStudio]

Ok, I had a look to your work. Try to select all those faces back of the seam, Ctrl+Alt clicking with face selection, then press U and Cube projection. Now it should align correctly. If for some reason this does not work either you can apply the Mirror modifier make sure that auto merge is activated, then come back into edit mode, select all the faces you need to align at once and U for Unwrap and select the Unwrap which works best. Good luck Christophe!

[@fr0gpk]

tf man slow down on those keys I have 5 min of experience with this program

[@Jobby1975]

way way way way too fast