EVA Foam Synthetic Teak Decking Boat Install - DIY - Biltema - Crescent Virgo

  Рет қаралды 33,006

Jobathano

Jobathano

Күн бұрын

Пікірлер: 20
@cyrielgaemers
@cyrielgaemers Жыл бұрын
I hear a lot of times that it's soaking rain water or anya water, is that true?
@icannevergetthistowork
@icannevergetthistowork Жыл бұрын
Would help if you explained as you went along!
@jobathano1660
@jobathano1660 Жыл бұрын
Sure, when i did this install i was not really in good spirit in general. So it was just footage i took and edited together a long time later. Its fairly straight forward though. Making a template, cuting out the correct size, plaze down and i used regular teak couching to help protect the corners from water. It still looks the same as when i installed it.
@arttu4313
@arttu4313 Ай бұрын
How has it held up?
@jobathano1660
@jobathano1660 Ай бұрын
Still looks nice, off course you will have some wear on the surface since it’s soft. But not started to peel, and then water starting to soak in under, which was my biggest concern. I guess caulking in the edges helps.
@arttu4313
@arttu4313 Ай бұрын
@jobathano1660 i've looked at Flexiteek, and while it looks better than EVA Foam, it's still as expensive if not more expensive than real teak. Which is insane haha. Might try this Biltema stuff
@franciscotrujillo4961
@franciscotrujillo4961 5 ай бұрын
Resiste bien el sol y las manchas?
@jobathano1660
@jobathano1660 4 ай бұрын
Yes, but it won’t last forever. And if you get something on it, you don’t want to scrub to hard.
@bcortez80
@bcortez80 Жыл бұрын
What sort of paper did you use for the templates? Looks like a type of foil backing.
@jobathano1660
@jobathano1660 Жыл бұрын
I don’t know the name for it, but it’s some kind of paper used for construction. Aluminium paper for wet barrier, building bathrooms and such. Just took something laying around, but it sure made it easier.
@karstenhyldgaard9039
@karstenhyldgaard9039 6 ай бұрын
What kind of boat is that, it looks really nice. 👌
@jobathano1660
@jobathano1660 6 ай бұрын
Its a Crescent Virgo, early model. Nice boat, I like the cockpit, size and hull. Perfect for Nordic climate.
@jonathanscheurich
@jonathanscheurich 9 ай бұрын
What's your experience one year later? Did it last? Any tearing?
@jobathano1660
@jobathano1660 9 ай бұрын
I have not used it to much because of engine problems, so not so much mechanical wear. But put the boat back in today, still looks like when it was installed.
@Taka.1011
@Taka.1011 2 жыл бұрын
Whoa it's been a long time xD
@jobathano1660
@jobathano1660 2 жыл бұрын
Hehe, yes. I was hoping nobody would notice the upload :)
@XavierPil
@XavierPil Жыл бұрын
Still looking good after 5 months?
@ExoPhotography1
@ExoPhotography1 Жыл бұрын
How is the EVA holding up so far?
@RaulAlamilla-xt9st
@RaulAlamilla-xt9st 11 ай бұрын
Heres mudo
How to DIY off-brand "SeaDek" from Amazon (SAVED OVER $2000!!!)
12:30
Waterman’s Way
Рет қаралды 240 М.
Каха и дочка
00:28
К-Media
Рет қаралды 3,4 МЛН
Chain Game Strong ⛓️
00:21
Anwar Jibawi
Рет қаралды 41 МЛН
小丑教训坏蛋 #小丑 #天使 #shorts
00:49
好人小丑
Рет қаралды 54 МЛН
ISITEEK - DIY synthetic teak decking
4:41
Flexiteek
Рет қаралды 664 М.
FAKE TEAK! How to Install EVA Teak Foam Decking! Sailing Meraki | Ep.31
10:36
SeaDek, Flexiteek, EVA Foam, or Teak Deck #seadek
6:14
World Travel Wonderful
Рет қаралды 14 М.
Installing a SeaDek pad on a Monterey 214 SS
5:38
SeaDek
Рет қаралды 356 М.
BAD Sailboats - What NOT to Buy - Ep 232 - Lady K Sailing
17:23
Lady K Sailing
Рет қаралды 924 М.
EVA Foam Boat Flooring Complete Application Guide | Jon Boat Build
24:56
How to make Fiberglass boat hull in 10 minutes. DIY
10:59
BCB-Boats Media
Рет қаралды 131 М.
Каха и дочка
00:28
К-Media
Рет қаралды 3,4 МЛН