Tesla Model Y | Model 3 ⚡️ Extreme Tail Lights- Hansshow LED Aftermarket Install + Review Xtreme LED

[@EMtesla1]

*See MORE Accessories!* ⚡ evanmichiels.com/general-2 X-treme Tail Lights ⚡ bit.ly/3OrrLOk *(Use Coupon Code "TeslaEvan")* Fish Wire Tape⚡ amzn.to/3zscYyH Socket Set ⚡ amzn.to/3aZGXo5 Pry Tool ⚡ amzn.to/3onyxtL

[@jorgecanales4203]

These go so well with the Midnight Silver color!!!

[@JeffMcNeal]

These look great, but I want to wait until Tesla performs the recall work on the rear wiring harness before I try installing something back there.

[@EVRevolution]

great job and well explained. i am thinking of getting this set for my model 3.

[@symmetryofzero]

Why do the break lights flash first before the amber strobe when indicating?

[@tricky5222]

Wish there was a way to keep them in night mode. Love that look alot more

[@sorianosn]

Looks awesome! How bright are those backup lights for illumination?

[@EMtesla1]

They are a little small but still can see fairly good both day and night

[@purifiedbleach1196]

Why does the brake light flash first when you put on the turn signal

[@cuongvan4536]

@EM Tesla: It seems like the brake light on the driver side flashes before you turn on the turn signal?? Why is that?

[@symmetryofzero]

​@@cuongvan4536I have these and this happens to mine. I don't like that. A friend bought the same ones from AliExpress and his don't don't do that.

[@naterob2222]

Previous Hansshow taillights had issues with the turning signals coming on when hitting the brakes on Tesla Model 3 years 2020 and older. This does not appear to be affecting your 2018 model so I wonder why that is? Did you ever experience the Hansshow Fishbone taillights for example? I am just nervous about buying them if my 2020 will still have this issue

[@purifiedbleach1196]

Do the newer ones have the issue too? 2022

[@peshtigomark]

I had trouble with the wishbones as well. After about 3 or 4 months they started freaking out. Causing havoc with autopilot cameras, cruise control, FSD you name it. Kept saying turn signal fail.

[@gli1984]

Hey, do you have an install video of your Hansshow power trunk? I also have a 2018 Model 3 and I’m currently installing the extreme lights. I have the hansshow power trunk installed as well but I have two chords on each side at the bottom of the trunk that are not connected to anything. Not sure if they even do anything. I believe they are purple. Awesome video btw! Hope to hear back. 👍

[@EMtesla1]

Yes, its under my channel.

[@henryberg2155]

Mines came with jumper wires do I need it ?

[@RossParos]

Nice looking #XRP lights!

[@NishHariyani]

Hi Evan I need your help please. I live in London UK and had these exact lights installed on my 2023 Model Y. Since the install the lights work fine but on the centre console the brake lights don’t come on in the Tesla car icon. The indicator / left right signal show on the car image when activated but if I brake or re-gen brake the side brakes or the centre brake light does not illuminate. Any ideas ? Thank you

[@EMtesla1]

I wonder if this is a software issue as my model 3 illuminate the lights on the screen. I'm not quite sure with the Model Y to be honest.

[@tcsdoc]

Your video is vague about the wires your tracing from the trunk up through the weather seal tubing. Did you fish both wires or just the left (passenger) wire? I don’t see how the other wire is routed from the trunk lid to the tail light.

[@EMtesla1]

Both wires are feed through the weather seal. One for the right and left lights on the top trunk lid.

[@murat2209]

wow - nice... but will the plug for loading also be replaced?

[@RisumOfficial]

What about the fog lights?

[@EMtesla1]

There is a small red portion of this light that is enabled when using the fog lights.

[@AmbuReviews]

Any idea what the blue and white cable actually does? Why does the left and right need to be connected?

[@garymcgrath5938]

They need to be connected to synchronise the startup function as is often the case with fancy after-market lights. Also older Model 3s only have 1 reverse light. Connecting both lights allows older M3s to have dual reversing lights.

[@Swaangin]

Hey man, appreciate your videos. Do you still have these taillights in the car? Saw another reviewer say how his got water in them and that the reverse lights do not offer, if anything, worse visibility at night while reversing.

[@EMtesla1]

I still have them in place! No issues and no water.

[@Swaangin]

@@EMtesla1 how are the reverse lights at night

[@EMtesla1]

@@Swaangin They are smaller than the normal reverse lights, but a still very bright at night.

[@henryberg2155]

How long did it last ?

[@EMtesla1]

What do you mean? I still have them installed on my car today.

[@henryberg2155]

@@EMtesla1 I seen people having water damage after the first rain so when I ordered mines I resealed it with window silicon just in case. I got mines installed and noticed the tail light turn signal turns on with the brakes is that normal also what app do you use ?

[@EMtesla1]

@@henryberg2155 ensure the wires are connected properly. Mine have never leaked any water since this install.

[@yarbroughscott8304]

Do you think these will work on a 2022 Tesla y performance?

[@EMtesla1]

yes they work on any model 3 or model y. Please select the correct options at checkout through Hansshow. Be sure to use coupon code TeslaEvan at checkout to save money.

[@petermiles8456]

I bought some on eBay and the blinkers light up when the brakes come on :( might have to grab them from this site and hope they don’t

[@EMtesla1]

Yea I stay away from eBay and Alibaba

[@MDbandit10]

its because they are made for the UK, USA is different. requires slight modification

[@mattaut88]

Hello! Could you please tell me if these have the E-MARK Number like the OEM from Tesla? Thank you.

[@EMtesla1]

Where would this be located?

[@mattaut88]

@@EMtesla1 Somewhere on the black part of the light housing. Should be visible when built in. Think it's laser engraved.

[@EMtesla1]

It’s got a DOT SAE IRF2 ST stamped on it. Not sure if this helps

[@mattaut88]

@@EMtesla1 Ok, looks like not. would've been too good. ty

[@AlienwareHuy]

Does this void warranty at all?

[@EMtesla1]

all plug and play and can be removed

[@henryberg2155]

The only thing I hate is that the reverse light is so tiny

[@adriannicolas8763]

I understand that is different usa model by Europe ones and wires aren't the same 🙄🤔

[@khalilbworld9140]

Looks good man these are the best I’ve seen so far.. thanks for sharing. I have a question about the instrument cluster, I’m trying to update the version and when copy the files to the thumb drive and plug it to the display it doesn’t do anything it should start the upgrade automatically right? Any advise!! I did format it to FAT32 copied the two files there is one called update and the other one it has a long name ends with .bin I think. These the files that need to be copied? Thanks in advance.

[@EMtesla1]

Make sure these files are not in any folders, just directly on the thumb drive. It took mine a few moments to recognize the files to update. Hope this works!

[@khalilbworld9140]

@@EMtesla1 Thank Evan I’ll give it couple minutes. The vendor said wait 30 seconds and I did.. I don’t know. What part in Georgia are you? I’m in Augusta…

[@EMtesla1]

Savannah!

[@khalilbworld9140]

@@EMtesla1 I have an appointment in August with Tesla Service center Savannah I’ve been there couple of times… you think they gonna say anything if I leave the display and the yoke steering wheel on? I’m going for a noise by the front wheel

[@EMtesla1]

Please email me found under my channel.

[@corywhyte2899]

I bought a set of these off Alibaba and it didn't come with any of the wiring harness. So I got a refund on them and now am left with these without a wiring harness. How difficult would it be to make your own harness?

[@EMtesla1]

I would never buy on alibaba... just go through hansshow.

[@CarGang4life]

First

[@The1978johnny]

you cut your truck line seal... a little WD40 and a flex fish line would have done the job or some olive oil... lol thats a 60.00$ part and all it would have cost him is time...

[@EMtesla1]

I already had by auto trunk wires going through that... there was not enough room.

[@lmaohistalkers]

Yeah looks nice but nah that’s too much tedious work. I’d end up breaking shit, patience is not my strong suit.