Eve Online Planetary Industry Guide (Tier 2 Production Planet) Beginner

[@audiojake8]

My referral link gives 1 million Skill points. www.eveonline.com/signup?invc=54de4256-1d9b-4588-b684-e86629e1e697

[@banecaomhnoir2725]

Two years later, still easy to follow, and very helpful!

[@rudidup]

Thanks for the video! It helped a lot - especially the step with having to first have the T1 products loaded in the launchpad from space first to setup the input routes. That part had me stumped on my own.

[@audiojake8]

Glad it helped

[@ilikelistentomusic]

Great job buddy. Most descriptive video I have come across. Thanks for taking the time to do it.

[@audiojake8]

No problem hope it helps you start a PI empire

[@joszzzzz]

Just to agree, that after two years still a great guide!

[@revamp2245]

Have you considered.. first expediating into loading into the launchpad. Setting the first input route from the storage and the secondary the launchpad to the facilities. Setting the finshed goods to the storage and fill up the launchpad also with unprocessed. As time progresses( timer permitting and periodically remotely you transfer goods from the storage to the launch pad as the goods are being now taken from the launchpad and vice versa and keep refilling the two storages while moving the finshed goods into the poco and refilling the launchpads and collecting the goods periodically when the stack of unprocessed goods are depleting and need a refill at the poco and the finshed goods are at a sellable useable stack.

[@militarymoose87]

Thank you. This was extremely helpful. Most Pi tutorials only cover t1 resources.

[@audiojake8]

Glad it helped - hope you start a PI empire

[@madelynpryor9797]

Thank you for taking the time to do this.

[@audiojake8]

No problem I love PI and it's a great way to make passive income

[@AtomicKirchovf]

Do some on p3 and p4 products. I have 12 toons doing pi now but want to see if your setups may be more efficient then mine. Only thing I would have changed on yours was putting 2 more launch pads in instead of storage. That way you can skip having to move any products at all.

[@audiojake8]

I have a full p3 production setup running atm I can do a video on. I tend to stay away from p4 as it's very material intensive and the risk factor explodes due to moving so much material around. I can make a video discussing setups of p4 though.

[@mellogo1d191]

@@audiojake8 please Do ...! it'd be greatly appreciated !!

[@richardautry8269]

i agree with Atomic. Setup with one launch pad per input. each one can have 26k T1 material. Then route it from there to the factories. then have a 5th launchpad for output. make a spreadsheet that defines each launchpad and its input/output. This will streamline your PI collection. Warp to Custom Office. put the inputs in the correct locations. retrieve the output. done. the main issue with PI is the tediousness nature of it. trying to stay motivated over a long period of time. Minimizing the effort will go a long way into ensuring your success.

[@TheKauff]

​@@audiojake8 @Atomic Kerchovf Not sure if you advice on an old video, but P4 doesn't have to take lots of input. Each factory making P4 only needs the input from 2 P3 factories, per input. So, if the P4 you're building needs 3 different inputs, you only need 6 P3 factories to feed it. Anything more is a bottleneck. A P4 factory with 6 P3s can easily fit on most planets, even with storage & launchpads. Plan everything out well & you just drop off P2 inputs & pick up P4. 😊😊

[@nargileh1]

Well ... I would link the three plants adjacent to the launchpad, directly to the launchpad and then complete the rest of the links horizontally. If you honeycomb, the link distance shouldn't be any different than your setup, but the throughput is evenly balanced over the three links.

[@biffski]

wait so everytime you bring your P1 to the planet customs office, transfer it to the launch pad, you have to then maually transfer from pad to the storage? and do this every time?? Cant you just automate this without using storage facilities?

[@KevinMichaelPrier]

Do the facilities take up less power/cpu on barren planets? Why are they best for production aside from, "it's the way ccp set it up?"

[@iamzuup5381]

The storage unit wasn't essential, you can go both in and out directly from launchpad as the In product is always smaller m3 than the Out product, so it'll never go higher than the max launchpad's m3. The only exception is from P3 to P4 where the out product is larger.

[@jcldano]

The skill you mention...doesn't it just reduce any NPC taxes in high sec, and not corporate taxes anywhere?

[@audiojake8]

There is an NPC portion of taxes for the Customs office that is reduced by the skill. The player portion of the tax is just a rate set by the owner.

[@daveisnothere]

With the latest changes to pi, the size being cut in half, pi can be a bit less hands-on or you can have 24 factories and a launchpad and storage

[@audiojake8]

Yes - I plan to make an updated video - as the size change really helped PI

[@Dante3214]

I know this is old news, but I'm returning to EVE and glad to hear PI is a little easier since I am interested in it. Thanks for the video

[@revamp2245]

Is there a way to reduce the expedite transfer countdown timer..does upgrading a specific link do this.. ?

[@mellogo1d191]

wow, what a great video...! I have been absolutely baffled by PI, this made everything SOO simple however, instant like and subscribe !! P.S. do you have any more Eve online videos planned ??

[@mellogo1d191]

now, its time to demolish my production planets and re-watch your first video to copy them, they're a bloody disaster !! LMAO !!

[@audiojake8]

Glad the video helped - PI is really a lot of fun once you build an empire.

[@mellogo1d191]

@@audiojake8 yeah I’m still in the process of building my empire though I’m afraid. Hey I was wondering I just moved my PI into lowsec however I’m still doing my P2 production in high sec. Are there any benefits to doing it in lowsec too at all..?!

[@audiojake8]

@@mellogo1d191 Not really - it's fine to leave your production planets in Highsec - Really the only advantage is some Low sec areas have lower taxes at the custom offices - But there are Highsec areas that have low taxes as well.

[@mellogo1d191]

@@audiojake8 awrsome that’s what I thought thanks ..!

[@tntaftershock]

can you pick back up a command center after its placed and submitted ? or is it lost if you change planets.

[@daveisnothere]

It is lost.

[@audiojake8]

Unfortunately No - it's gone

[@fatiguejras]

Thanks! Had to watch 1.5 the speed though ;p

[@thomaswright668]

Thanks it very helpful

[@audiojake8]

Thanks glad it helped

[@Lovewisdom-Gothamjoke]

Thanks!

[@darkwingduck9589]

I'm curious why you wouldn't just route the tier 1 from the launch pads to the storage? As soon as you transfer them from orbit then they instantly go into storage, no need to expedite transfer every time. Other than that I really enjoyed watching this.

[@richardautry8269]

Because you cannot route from a launchpad to storage

[@darkwingduck9589]

@@richardautry8269 well that explains it! Thanks for the response!

[@Maupiaz70]

good job, are you playing yet?