Amazon Affiliate link below www.amazon.com/shop/influence... www.milwaukeetool.com/ Instagram / flatratemaster flatratemaster@gmail.com
Пікірлер: 349
@wallyg.24096 жыл бұрын
I've grown to love the flex head's myself. When I use a non flex head ratchet, it just doesn't feel right anymore. Excellent vid, FRM.
@rudykade27842 жыл бұрын
instablaster
@TonicofSonic2 жыл бұрын
Unless you need to break torque on something, than it is the other way around.
@joebelichio69744 жыл бұрын
Gearwrench 120xp 1/2 flex head is a beast! I've had mine with a 6 foot cheater pipe on it. A minimum of 320nm to break axle nuts free. They're tough
@WrecklessEnterainment5 жыл бұрын
Honestly the Pittsburgh pro long handle soft grip flex head 3/8’s ratchet has been great for me. For $26 it’s a steal. I’ve had it maybe 6 months and I have no complaints as far as daily use. The only thing people really complain about is the switch is backwards from most other ratchets but it never bothered me.
@forgedsteelwrench92495 жыл бұрын
I agree.... I got me the duralast comfort grip n it works great.
@Lasurge19825 жыл бұрын
Forged Steel Wrench I own several duralast ratchets and I’ve never seen a soft grip. Is that something they sell online only ? Ive been keeping an eye out for one because I’ve heard a couple people say they have one but so far the store that is in my area doesn’t have one.
@Yonny3163 жыл бұрын
@@Lasurge1982 did you ever find what you were looking for? LoL
@robindabank40892 жыл бұрын
My buddy has a Pittsburgh and I grabbed it and felt sick, snap on ftw
@wilbertcoria4768 Жыл бұрын
They dont make duralast soft grip handles
@themonolithian5 жыл бұрын
That's actually the pinnacle of craftsman ratchets you had. Lol
@jeffcuevas59184 жыл бұрын
I still use those old double paw craftsman today.... 32 years later still good as it was in 1988
@dan50873 жыл бұрын
Very robust
@dshiznit12a3 жыл бұрын
Rhft are nice
@betmon59863 ай бұрын
Jeffcuevas I agree bro I still use and prefer them over my dual80’s snapons and also still use my old Mac low tooth rats as well they and my craftsman are beasts I’ll put them up against any of todays rats
@dchauto1566 жыл бұрын
I have almost the same 3/8 Matco as my primary and love it. You make an excellent point about holding the tool to know if it works.
@8power06 жыл бұрын
GREAT VIDEO I HAVE WATCHED THIS PARTICULAR ONE MORE THAN ONCE on the ratchets good to hear it coming from you a true professional one who uses them everyday for years . I saw a open end electric ratchet on a mega factory episode one time think it was a Porsche factory . It may not be in the hands of consumers as of yet but I must believe someone somewhere is working on it . In the life of a mechanic without the enjoyment of using are tools there is only the bills to pay . Thanks again for the professional look at these tools and please keep the the videos coming .
@fieldsofomagh6 жыл бұрын
Never realized there was so many variations of the different ratchets. Great in depth video .
@PhantomGraff5 жыл бұрын
I've always liked the original style naked handle/bare steel type. Dont soak up fluids, but just fits my hand better. But to each his own.
@snaponjunky16 жыл бұрын
Great topic, I fell in love with Snap-on 23 + years ago never look back. Love my old plastic handles hate new comfort grip even though I own a couple. Could not agree more you said.
@mikeswindell49176 жыл бұрын
Great video! I have the locking flex Matco's in 1/4, 3/8 & 1/2 and they are my favorite and my 3/8 gets used the most! Keep up the good work
@NewLevelAuto6 жыл бұрын
Awesome video! Keep up the great work
@CurtisGraham914 жыл бұрын
Agree ! I bought a Snap on 3/8 flex head with the comfort grip handle years ago pretty much when they first came out still my go to !
@Jursaw6 жыл бұрын
My fav ratchet is my 2 foot snap on locking flex head 1/2" When I whip that thing out you know shit is going to get done!
@tjlovesrachel6 жыл бұрын
I have the same ratchet as you... I love that friggen thing... just like you.. when that comes out .. something’s gunna move or get snapped off ... don’t think I’ve come across a bolt/nut I couldn’t budge with that thing..
@Jursaw6 жыл бұрын
When my M18 Fuel 1/2" high torque 2763 model (1st Gen) couldn't snap my torsion bar bolts you bet this thing broke them right in half!
@tjlovesrachel6 жыл бұрын
Jursaw I believe it.. snapped many a frozen fastener with that ratchet
@GEO-xx6sq5 жыл бұрын
I really like your video.......thanks for being respectful as well as informative
@geoffclark98204 жыл бұрын
I'm a big fan of ratchet diversification. For years I used 4 or 5 but as I'm in the trade longer I've found that instead of struggling it's much easier to have a broad range of options. I know I'll catch some flack for that but its better efficiency. I think obviously knowledge is key to success but if you don't have the tools to do the job, knowledge is kinda an afterthought.
@YungJosh506 жыл бұрын
Hey Flat Rate Master, you can "swap" a modern comfort soft grip (round profile) on your 3/8" Flex-head ratchet with the red acetate handle. In other words you can interchange the hard handle for the comfort grip: part no. [FH936-12].
@danieltubbs4584 жыл бұрын
No the shank is too big
@YungJosh504 жыл бұрын
@@danieltubbs458 You're correct.
@eddiegarcia53876 жыл бұрын
Your videos are helpful I’m going to tech school for auto and your video for new starting techs tools must haves was helpful
@Bradsmobilecarcare5 жыл бұрын
I do some small engine repair out of my garage on the side and I use the Pittsburgh flex 1/4 and 3/8 most of the time now. But I am looking at taking it to the next level in the spring so I have been looking at the Matco website allot and I am impressed at what I see. Glad to know they are your go to and they have treated you well!
@JJ-iw7nh6 жыл бұрын
I use that exact ratchet myself. I love it. The locking swivel is the best part. And just like yours I abuse the hell out of it. Never had a problem with it.
@RayRay-ov7uw6 жыл бұрын
Very helpful... looks like I'll have to tour the matco truck 😎
@richardsawdon34015 жыл бұрын
Thanks for the review. At 8:34 you displayed the 1/2" drive Craftsman ratchet briefly. The one feature I do like about it is the knurled thumb wheel. Because the head is relatively large, it can sometimes be difficult to use the thumb wheel, especially if you are forced to hold the ratchet in an awkward position. But, I find the 3/8" ratchet is much easier to use the thumb wheel with because the head is smaller. I also have some Tekton ratchets with a thumb wheel, and the wheel is located above the head instead of below it, which for me is generally more convenient. I like this feature because it allows me to turn the nut by fingertip, which can be convenient if the nut is spinning too freely to generate enough friction to resist against the ratcheting mechanism. Otherwise, there's no ratcheting action until there's sufficient resistance to turn the nut.
@wyattoneable6 жыл бұрын
You made some good points here. I like the idea of the locking flex head. I don't own one yet so maybe that will be in my future. Thanks.
@JohnSmith-dt7gu4 жыл бұрын
Snap on have locking flex head
@tylerwebb19004 жыл бұрын
My USA made half inch craftmans actually lasted longer than my snap on it was my go to and did all the work i needed it to !
@workingclassgarage6 жыл бұрын
Mac's new fine tooth ratchets are awesome, probably my favorite. That long Snap-on 3/8 flex head is awesome too, I picked one of those up awhile back.
@flatratemaster6 жыл бұрын
I haven't had a Mac Dealer since 2005, so I know very little of what Mac is offering now a days
@scottpearsontoolsmore1856 жыл бұрын
I love my old plastic handle Mac 1/2 in drive. I have the old style 3/8 drive and 1/4 in drive Snap On love them to. I haven't had a chance to get my hands on the comfort grip. I probably won't retired old school and still use them. Great video my friend keep up the great work see you in the next video
@audifixr1016 жыл бұрын
I have one of those EZRED long handled quarter drive ratchet things, love that thing
@josephpuchel64976 жыл бұрын
I’m going to look into the locking Matco ratchet. I think I can put it to use. Excellent tutorial
@831inquietos3 жыл бұрын
I love my HF pitsburg pro. Im loving your channel keep it up man.
@RedemptionGarage4 жыл бұрын
The matco locking flex head 3/8 88 tooth ratchet has become my go to. The Pittsburgh 3/8 flex head has been good for me for years surprisingly
@patjesscole27095 жыл бұрын
My go2 3/8 is the same matco as your green one same coler too love it!
@brandong19905 жыл бұрын
I love Matco ratchets but I'm also in love with the mid length 1/2" drive snap on fine tooth
@prevost86864 жыл бұрын
Brandon Gordon Snapon doesn’t have a ratchet that compares to Matco’s offerings . That’s just a fact. I don’t like everything Matco makes but their USA made ratchets are the finest quality that money can buy. I started buying their USA made ratchets in 2000 and have only needed to replace the head in one. My 1/4” drive extra long handle ratchet finally broke. If you could see the work I put it through before it busted you’d be amazed. Matco all the way on ratchets.
@devinsmith41516 жыл бұрын
Good video, I personally use only Dual 80's and have 80% of the entire range, plus all the comfort grip round heads. Making flatrates and speed, the last thing you want to fight is your ratchet causing back drag, or a ratchet that won't hold the torque, or a ratchet that isn't long enough. As a technician, you make paycheck by using your hands. A weekly Snap-On repayment beats busting your hands and quitting the career, what sort of job you can do without your hands. There comes a time when your up or below the engine bay and need to view specific things when your turning the crank and you do not have time to raise or lower the hoist nor a second person. These small things such as ratchet selection, there is a difference.
@william380222 жыл бұрын
I hope you’re right because I just ordered the long reach dual 80 flex head 1/2”inch flexible head ratchet it cost me with tax and shipping $214.50 I got it from a seller on eBay brand new coming from Florida
@devinsmith41512 жыл бұрын
@@william38022 Its a steep investment, but point is there, you pay for the service with your local truckie. He will go out of his way to repair it (if your truckie has the parts and can get it quick enough). It beats hitting toolstore in your spare time when you could have to spent it with your family. Buying from online is a mixed bag, its basically undercutting your truckie. Its not fair to ask someone that hasn't made money from you to repair something that he never sold you. The best thing you can do in this case is to keep it maintained once awhile (clean, gut everything and re-lube with Superlube). Make sure the cover plate is fully seated and I recommend a bit of medium strength loctite on the cover plate screws (I had a F80 cover plate movement). Know the limits of each tool, if there is visible rust etc, douse it with penetrant for a bit before you try. As always, work smarter and minimise injuries. FYI: Where I'm at (OZ), I paid much more than that for these ratchets.
@Toolaholic76 жыл бұрын
I have the Matco locking 3/8 flex head too and love it.My go to ratchet most of the time now.I broke it once so far and glad I bought a second one later.Broke off the drive part off using it on a fill plug in a rear end.Did get it warrantied,a ratchet repair kit was put in it and been good to me even more now.
@flatratemaster6 жыл бұрын
I finally Broke mine last week, I would have bought a second this week, but he didn't have it in Orange so I will wait till he does;)
@Toolaholic76 жыл бұрын
Now waiting on Matco changing the route for the new dealer to come in.Had it set so she came in on Wendsdays and there was a problem with that.My dad and I are gone on Wendsdays and told their district rep this
@pepsibottleq4 жыл бұрын
I think starting out the Proto pearheads are by far the best deal, but God I love those Matco flex heads with the grip
@sixluggin6 жыл бұрын
I prefer the Matco 3/8 locking flex head myself. The exact ratchet you were holding. That’s by far my favorite and most used ratchet. I also have the 1/4 and 1/2 and love them as well.
@jimzivny15546 жыл бұрын
After 40yrs wrenching I've got quite a collection also, and yeah I have one of those Snap On hard handle ratchets.
@garybuelow53626 жыл бұрын
Nice collection of ratchets, I feel when it comes to the 1/2 in. drive it is money well spent on Matco or Snap on for the long ratchets just for the safety of not having them break when applying a lot of torque. One of my favorites is an Astro 1/4 in. gearless stubby for running in small fasteners. As usual Great video!
@DavidsonMott4 жыл бұрын
I have a variety of ratchets. I often reach for my older Made in USA 3/8 Craftsman ratchet. I like the way it fits in my hand, plus plenty of rebuild kits. I also have one of the old V series 3/8 and 1/2 Craftsman flex head ratchets I don't often use.
@EXOVCDS6 жыл бұрын
Just like the wrenches... variety is key.
@granadojl4 жыл бұрын
Aside from the many Matco tools you have... This was a good and well put video that I felt was unbiased. I've learned early on, it's not about the brand.. It's what holds up in the type of job that it calls for. I have many brands and all have different handles for the type of job I come across. Like you said. Personal Preference.
@Ken-wu6hr6 жыл бұрын
I Had Some Great Snap on Ratchets. They Had Big Handles, When they Broke Thinner handles. Now I Use The Locking Matco Long Locking Flex Head 1/4 & 3/8. 3/8 Matco Stubby Flex Head & a Snap on Big Handle Regular length Ratchet
@asavage15766 жыл бұрын
I made a promise to myself to buy less off the tool trucks. Two things that I'll always buy off the truck tho is snap on wrenches and ratchets
@93sundance6 жыл бұрын
I didn't see the point in a bent handle either until I bought a cheap used SK off the Mac truck and fell in love with it. When I broke it I bought a fine tooth Mac. Makes a big difference when doing spark plugs on LS in GM trucks. Worth the money.
@honda_doc68266 жыл бұрын
Great advice as always. Oh, and I remember seeing that craftsman ratchet in your tool cart video.
@tommytruth75956 жыл бұрын
And there is nothing wrong with it, especially in the 1/2" drive. Not that many teeth in it but it is very strong. And if you need more torque, use a breaker bar as you should be doing in the first place.
@colemanbonner3 жыл бұрын
The bent-handle and offset-handle snap-on 3/8s ratchets are awesome once you get used to them. I preach for them now lol
@ronbaynes27556 жыл бұрын
This is totally a personal preference. For me, my go to ratchets, when I need one are a 1971 craftsman 1/4 drive, and for 3/8 I reach for my SK flex head with curved handle or my craftsman flex head with cushion handle. I have 11 ratchets in my box all of which I have had for years. The one I use least is my snap-on 3/8 straight shank. Very hard to get the socket off that one with oil on your hands. Whenever possible I reach for the cordless impacts first. That's just the way I roll & I've been wrenching a long time.
@gabrieltrevino63592 жыл бұрын
I love Matco ratchet snap on ratchets feel like they’re full of liquid dull feedback Matco just feels good strong as shit too and thinner
@johngibson35946 жыл бұрын
Nice vid always good advice!
@lukereinhardt46386 жыл бұрын
I've got the comfort grip matco locking flex head 1/2 inch that's the size of that snapon. I love that damn thing. Great or doing eccentric bolts on alignments when they are really stuck
@colemanbonner3 жыл бұрын
Snap on makes 2 different “bent” handle 3/8. A long one bent away from the drive side, and a shorter one bent toward it. They’re AWESOME. I got my rep to put quick-release heads on them.
@jesserodriguez2364 жыл бұрын
I thought this was the Yankee Marshal for a second
@oldguy20825 жыл бұрын
Some how I missed this video even though I subscribed to the channel... Anyway, I agree with you that you need to see how it feels in your hand and that it's a good idea to have different lengths of ratchets. One thing that I would mention for use in certain tight spaces once you're loosened the nut/bolt up, is the palm ratchet. I've had my SK 1/4" drive for years and though I don't use it hardly ever, that occasional time I need it it has saved my bacon.
@bosborn16 жыл бұрын
I can attest to the long handle Cornwell 1/2 being strong. I’ve thrown the cheater bar on it many times and gone to town on some big fasteners. I’ve had the handle flexed out some much it looked like it was going to break. It’s the older course tooth design, but man is it strong. I typically use it on big stuff that I can access with 3/4” stuff. My only complaint is the course tooth design, but then again that’s probably where the strength in the drive comes from Would love to get some more Snap On stuff. But that would require us to have a truck in our area again.
@asmautollc6 жыл бұрын
bosborn1 that older course tooth (30 I think) style is one of the smoothest ratchets I I’ve ever used. I have a regular length 1/2 Cornwell I got off Garage Journal that I don’t use much but won’t part with. Those handles are made to fit perfectly in cheater pipes lol.
@bigrigben12024 жыл бұрын
I’d put my 24” gearwrench 1/2” locking flex head ratchet up to a snap on or matco ratchet all day everyday day. That thing can handle some serious torque
@henri65954 жыл бұрын
How many pounds of torque do you thing it could handle? I have the same 84 tooth one but never did anything beyond brakes.
@BigDog500016 жыл бұрын
I’m with you on this FRM, I am always using a 3/8” ratchet, especially the flex heads. And the longer you do this, the longer the ratchet you reach for.
@flatratemaster6 жыл бұрын
LOL, Sucks getting old:(
@johnlong58996 жыл бұрын
Working in crammed engine bays, low back drag is one of the most important features for me. It ranks up there with feel.
@geologic7406 жыл бұрын
John Long I'm with you. It's annoying to deal with a ratchet that won't ratchet back. 8 appreciate my vintage ratchets because they're work in just enough to have very low drag on the gear.
@Peep18m4 жыл бұрын
John Long I agree the new Mac and snap on are the best w that by far.
@thedewdster3 жыл бұрын
I used to think bent handle ratchets were pointless too until I bought one. I've owned snap on, sk and gearwrench versions. It clicks as you start using it everyday how much it could have helped you in past jobs... Can use as a speeder handle, helps keep ya straight when using deep sockets and keeps your hand away from things in alot of tight situations. I find they pair best with a set of semi deeps 👍
@coolguy23706 жыл бұрын
Honestly my favorite rachet it the s&k roundhead with the knurled handle
@prevost86864 жыл бұрын
tyler henry It’s a vastly underrated USA made ratchet. SK as a whole is a vastly underrated USA company. I really wish that they could figure out how to cater to the professional technicians by providing a truck and a dealer yet still being more competitive that Snapon in price. I really want to see them survive and thrive amid the hordes of offshore stuff invading our industry. I don’t want to see another USA company bite the dust. We’ve lost too many already.
@GH-oi2jf3 жыл бұрын
Love my classic S-K 3/8” ratchet. I’ve had it about 60 years and I bought it used.
@beyer666 жыл бұрын
You should mention 1/4" drive handles with the 3/8" drives in them. I have the SK 45173 and the flex head snapon fcf72. They both come in handy a LOT to get into tight spots when you need a 3/8 drive socket
@233monte5 жыл бұрын
We don’t have any other tool guys besides snap on, so that’s all I have. I love the hard screwdriver style handle on my 3/8. That is the only “grip” handle ratchet I have though. I found they get in the way sometimes. I love LOVE the snap on extra long 3/8 flex head. It just makes life so much easier. I don’t know how I worked before fine toothed ratchets honestly 😏
@calvinjohnson23825 жыл бұрын
My go to is the kinchrome 3/8 telescopic over my snap on fx80a locking flex head as I love the ability to quickly apply more leverage. I find it saves me so much time, instead of having to reach for my 1/2 inch
@tammeraeads7850 Жыл бұрын
Must be an Aussie, we dont see that branding hereabouts but I hear they make a quality tool, kinda like my warren and brown torque wrenches. I'll take them over a snap-on anyday of the week!
@codyfinchum8906 жыл бұрын
I love those old school hard handle those to me are the most comfortable handle snap on made second the metal third new comfort grip
@normansmith78066 жыл бұрын
I call my long 3/8s Flex Head my old man ratchet. Love it !!
@RedShiftedDollar7 ай бұрын
The old snap-on 36 tooth ratchets have possibly the most durable design ever in a ratchet. And Snap-On still sells them under their Willaims and Blue-Point brands. Williams for standard and Blue-Point for quick release versions. The action is coarse so it doesn't feel as smooth as a dual 80 or other high tooth count ratchet, but it's beefy internals make it the king of brutes, especially in 1/2" drive.
@1slkss4 жыл бұрын
Tried pretty much all of them over the years, when it comes to ratchets for me an old school SK round head in 1/2 or 3/8 is what’s in my hand 95% of the time. For 1/4 I go with a 60’s era wright.
@ninjamigs17665 жыл бұрын
3/8 flex head long handle and a 1/2 flex head 22inch ratcheting breaker... the sad part KOBALT... but they work as far as oil changes, batteries, breaking Wheel locks and general service stuff.... the rest of my tools are all MaC tools... not USA. But they get the job done... when its flat rate.. I won't have no choice but to get MATCO,Snap-On, and even a little bluepoint... But damn I love the sound of a Snap on ratchet... Ooooh... so smooth... Thanks brother keep it up
@danieltubbs4584 жыл бұрын
Only thing I would add to this list is a big long 1/2" breaker bar
@billbeckett10216 жыл бұрын
Ratchets have come a long way and you definitely get what you pay for. I have 30 ratchets and seem to like the newer Snap On. Overall I find the SK round head to be an excellent tool to use.
@OUSWKR4 жыл бұрын
I’ve got a lot of money tied up in my snap on ratchets. 1/4, 3/8, and 1/2 inch. I’ve spent years wrenching and trying different ratchets. The advantage to having a good relationship with the techs you work with is being able to try something they have to see if you want to buy that particular tool or not. For me snap on fits my hands the best. Yeah I’ve got a couple of cheap craftsman and kobalt ratchets I use for some stuff like changing bits on the brake lathe.
@johnasosajr6 жыл бұрын
I like Tekton ratchets the 3/8 comfort grip I got is backwards righty tighty lefty loosey and I like that setup and it's pretty smooth for a lower cost good quality ratchet
@esnevip3 жыл бұрын
Love the roto head design, my go to 3/8
@wyattklingensmith88625 жыл бұрын
I love my gear wrench flex head 1/4 and 3/8 my go to ratchets or my old 32 tooth snap on Although i did get a snap on long handle 3/8 fl80 and a matco i do like, I also enjoy my little fine tooth Stanley and husky 1/4 ratchets
@epicragegaming20166 жыл бұрын
the only thing i use my standard length 1/2" ratchet for is putting a 1/2 inch socket on to loosen up chrysler jeep dodge drain plugs. it really doesn't have a purpose anymore. i have a 3/8 1/2 socket but i just use the half for w/e reason.
@bretwjackson5 жыл бұрын
Locking flex head matco ratchet all the way I bought fixed ratchets when I first started and I think I use them for a month and then never ever got used again
@gregoryfairchild24605 жыл бұрын
I also have a 1/4" bit driver ratchet ...flat low profile design for like airbag bolts or column covers etc.
@mongomongo17 Жыл бұрын
i like the all metal handles as there easy to clean,
@Lasurge19825 жыл бұрын
I have a duralast 19” 1/2 drive flex head ratchet. There one of the few brands outside the tool truck that I like. Not as good as snap on long handle ratchet on but for those on a budget I think it would work fine until you were able to switch over to the good ol’ happy- snappy
@antsupertramp5 жыл бұрын
I agree with the Matco 3/8 for sure
@cosmorobinson57766 жыл бұрын
After 20 plus years of wrenching, snap on wins the ratchet category. I only buy old school handles, I love the hard plastic handle ones.
@leefhead16 жыл бұрын
almost exclusively i use my matco electric ratchet. Other than that i have a non comfort grip matco 88 3/8. For bigger things i have a Mastercraft 1/2" ratcheting breaker bar that ive been unable to break, while ive broken 30 of their regular breaker bars. I can almost do it on demand, haha.
@Anonymous..VQ3.5Lg35 Жыл бұрын
Just looked at that ez red 1/4 ratchet! Seems like a handy tool! I love ratchets ahah! 😂 too many too choose but i found extendable locking, flex head, with quick release with comfort grip!
@kingsporttoolreview87034 жыл бұрын
I've done electrical work for 27 years, we don't use ratchets as often other trade, but we do use them from time to time in switch gear, bolting down equipment, running cable tray, ect..ect.. ...My point being that ratchets are a tool that I do use (just not everyday). I have always used a Craftsman I-Beam flex head ratchets for almost my entire career. Until just a few years ago, after years of always wanting one, I finally broke down purchased a Snap-On locking flex head ratchet (but I'm still using all of those old Craftsman sockets though - but I'm okay with that)
@jb2._3 жыл бұрын
My snap on roto head 3/8 is my favorite tool
@Hndsomehubby6 жыл бұрын
The matco 3/8 comfortgrips are nice.
@iamtheliberated5 жыл бұрын
I have to say, looking at it again (and I'm building a home/charity box in the near future, my choices will be slightly different...When it comes to big boy 1/2" ratchets, I have a 27" Cornwell flex head that I LOVE. I got it on sale half off, it's not fine tooth but it handles the abuse. I find their square comfort grip slightly awkward compared to a round grip, but it's actually big enough to fit my hand. At the same time, I build my second box, I'm going with a Matco 30" locking flex head, just for the locking feature. My Cornwell is not very often used, but I've walked it in a circle to bring out bolts that my very high torque 1/2" air impact would NOT turn. But, that's in shop conditions on a lift. Some of the situations I've found myself in at home, side work, charity work, I'm not able to anywhere near walk or sit under a vehicle, and that locking head as opposed to a ball detent is a big plus for me. I'm mostly a Snap-On guy as far as ratchets, but their big flex head with no locking feature is alright in 3/8" (and I've used it everywhere from ultra tight diesel oil and fuel filters to alignments in tight spots where a wrench is too short to keep ahold of) but I've seen guys smack themselves in the face with it when it flexed when they did not want it to. Great ratchet, great design, but if I have a flex head that big I want SOMETHING to keep it from flexing instead of turning under torque. That said, I own a fistful of Snap-On ratchets, but I started out with Gearwrench in my box. I finally brought my 120XP 3/8" home when I upgraded about a month ago. The Matco action is very similar in feel, slightly less positive on the click, but so is the Snap-On. I still have a Gearwrench standard length 1/2" drive and use it regularly. I can't knock any of the aforementioned lines as a whole. I love the feel and simplicity of the Gearwrench, but the Snap-On feels SO much better overall. I've even compared the swing angle, and the Gearwrench won out over the 3/8" Snap-On brand new off the truck, BUT, the comfort grip and the feel are superb in comparison. I'm not even devoted to comfort grip. I enjoy feeling the click (and the "It's 'bout to shear off!" through the handle and the comfort grips dampen that) but all my bigger ratchets are comfort grip for a reason. All that said, even the coarse tooth Cornwell isn't bad. Yeah, I got burned when I was in training by the swing angle, would've preferred anything fine tooth (and they make them) but they're still quality. If I can put my 300 pound body weight on it and break the bolt loose instead of blowing the gears out, it's tough. It's not the best feel, it's not the most elegant, but by golly it's good. For situations where swing angle isn't an issue I'd run a Cornwell coarse tooth any day, but those situations are seldom. On sale, for a general use ratchet, great deal for the money! I have a soft spot for them though, their factory is an hour drive for me. Ohioan pride, man. A ratchet is one of the most personal choices a technician can make. One size may never fit all. Just respect your fellows, help them if they're struggling, and stand as a brotherhood. We're all in this together, and we're all different.
@aayesher94002 жыл бұрын
Thanks for this
@robinsonsmotorcycleandauto39296 жыл бұрын
I prefer my Snap on Ratchets but have found gearwrench makes a nice one and husky as well. Don't own any Matcos so can't say either way. Great video
@william380222 жыл бұрын
I have also heard gear wrench ratchet’s for the money or actually very good,,,,I’m going to check out their 120 xp for3/8 inch ratchet and a quarter inch ratchet The gear wrench 120 XP half inch flex head Ratchet has a five star rating for well over 1200 people on Amazon for $44.97 I thought it was very impressive,,,if I had seen that before I purchased my snap on dual 80 half inch long reach flex head ratchet I may not have purchased it and I may have just bought a full set of the gear wrenches 120 XP ratchets instead,,, however I already purchased the half-inch flex head snap on dual 80 long reach on eBay for $214.50 it will be here by the end of this week or sometime early next week it’s brand new I purchased it from eBay,,, I may buy the gear wrench 120 xp 3/8”inch and 1/4” ratchet’s also
@charlesshankle317813 сағат бұрын
For 3/8 and below, Matco are my go to ratchets. But, for 1/2 and up, mac is my go to.
@ironman1518.3 жыл бұрын
STILL have one of those Craftsman 1/2" drive ratchets, bought in 1969. Used it for YEARS. I did always like the handle. When Craftsman went to China AND no more stores; Switched to Gear Wrench and Milwaukee.
@georgemarkopoulos55295 жыл бұрын
MAC ratcheting flexhead is hands down the best, the flex lock is built into the ratchet with an indentation preventing the mechanism from unlocking by being tapped from ratcheting and allows full function to the tech.
@gregoryfairchild24605 жыл бұрын
Thumbwheel ratchets...when you can't spin the fastener with just your fingers or the socket...you know those ones that are too loose for a ratchet but too tight for fingers...lol
@chrischiampo81066 жыл бұрын
Eggsolent Video Flat Rate Master 😎😀👍🏼👨🏼🔧 Keep them Coming Bro
@renaissanceman42675 жыл бұрын
Gearwrench 120 tooth ratchet I would put it up against snap on or matco any day....its a tuff ratchet Man!!
@Chadh4x5 жыл бұрын
I have a 3/8 Matco locking head ratchet, i stripped the locking mechanism twice now. I do like the ratchet but ended up buying the Snap on. luckily my Matco dealer is prompt every Friday so no issue there.
@meanodustino95636 жыл бұрын
Im a gearwrench guy myself. As a lube tech/ first year I have a Mac 3/8 flex fine tooth comfort and really enjoy it as pretty much my go to, however my 84t gearwrench is there for the oil filter and if it gets covered in oil, it actually has made it as quiet/smooth as the the mac 😂. Cant step up to a snap on yet....it just too much $ for now but ill get there...
@mcmahon11305 жыл бұрын
Gearwrench is really the best bang for the buck these days in my opinion.
@asmautollc6 жыл бұрын
Use the Snap On extra long in 1/4, long in 3/8, and Matco long locking in 1/2 (17”). Love the Matco except it’s not a CG. Wish it were but I got a good deal on it. The only thing about Snap-On drives me nuts esp 1/4 is needing a screwdriver to pop the sockets off. My favorite 1/4 is a round head SK. Those roto heads are great. Under dash & I like them to spin in torx bits, sometimes out when concerned about impact. I’ve got about 20 other ratchets most of which I didn’t really need but wanted lol.
@rogerharris39515 жыл бұрын
You're 100% right about personal preference being key. Can't comment about an auto repairman's needs, but for marine diesel engines I prefer Gray Tools. Tooth count is relatively low but strength and dependability are high (warranty service is unavailable at sea!). Check out their 14.5" 1/2" drive flex-head (part # 8799F).
@rampage94315 жыл бұрын
Matco truck is coming to my school tomorrow to give a presentation on there tools and since I'm a student the instructor said we get a 50% discount on tools so I'm thinking about picking up a Matco 3/8's flex head ratchet with green soft handle 👍
@sawzalvanreij3 жыл бұрын
hey flat rate master,your crazy as hell brother
@robswrenches95016 жыл бұрын
Good video Mike, but you make it look cold in Georgia. 😁 My sister and niece cancelled Christmas because they got snowed in last month. 🤣