How To Restart An Oil Furnace | Hard Lockout and Bleeding Fuel Lines

[@privatehudson4432]

5 TRILLION VIDEOS ON KZbin THIS IS THE ONLY GUY THAT TELLS YOU TO HOLD IT DOWN FOR 45 SECONDS !!!! THANK YOU !!!!!!!!!! SAVED ME 300!!!!!!!!!

[@toddberner9198]

@privatehudson4432 The reason for this IS so that the concontrol is.only.reset too many times and the chamber does not get way too flooded....that would be treacherous if it were to light.

[@lauriejo5610]

Hi Scott, I’m a 70 year old lady that lives on her own. This video was perfect for me to get my furnace running today. Fortunately this happened during the day and not not freezing temps. Everything is good to go now and I can still get up and down from the floor ok 😁

[@EverydayHomeRepairs]

Take the rest of the day off 😁 Nice work 🙌

[@matthewW97]

It's a whole 1 degree Fahrenheit outside, 1:00 am. And this man just saved my life

[@TheSilverFoxAndy]

Dude you saved me. Can’t get oil until tomorrow so I got 10 gallons of diesel and went through your progressions. Furnace kicked on the second bleed. Thanks!

[@EverydayHomeRepairs]

Nice 👊

[@privatehudson4432]

10 gallons would last you like 3 weeks lol I use 2 gallons

[@jorgedalva09]

You have no idea what a precious service you're doing for a world of desperate people like me! God bless you. I left my like, subscribed to your channel, and turned the notifications on!

[@EverydayHomeRepairs]

Welcome to the channel. God Bless.

[@lanaskywow]

Thank you for your help! It's been years so I didn't remember all the details. I used the 3/8 wrench, a washed/dry dunkin donuts straw and a 2 liter empty soda bottle on the bleeder so I could rest it on the ground while it caught the excess oil, then I could focus on closing the valve once the air was out, then poured the extra back in the tank. It started right back up!

[@EverydayHomeRepairs]

Thanks for the feedback!

[@MikeTrauma]

I just want to say this was a life saver it’s cold in Alaska and this got my furnace going thank you for the great video

[@solimandina]

Best video for doing this! I ran out of oil and didn’t have to pay 250 dollars to get my furnace started. Thank you So much

[@EverydayHomeRepairs]

You bet!

[@youroldsweetie]

$250!!??? 😳 It's about $60-$80 for service call in my small town! Small town living does have it's perks, I guess! (PLUS, the oil truck delivery driver offered to come in & get it started for me!)

[@porkeawkhao476]

I'm so glad I saw your clip explaining how to use it and how to fix it. It was very helpful to me. I forgot to look at my oil gauge grade. It caused me to spend a lot of time distracted resetting this machine. Thank you very much. Really appreciate it.

[@youroldsweetie]

MANY thanks!! On permanent lockout & didn't realize i needed to bleed again AFTER the green light & possibly multiple times.

[@cjsebes]

Thank you! First time in 24 years of home ownership and I ran out of oil. Dumped 17 gallons of Diesel into the tank, followed your steps, and now I can be assured that I won't cause anyone to pass out from my body odor at the event I'm going to tonight.

[@nicolejaaamzramos]

Thank you, Scott you saved my life with this video. you rock! thank you once again! Please keep posting videos!

[@ukiie]

Hey Scott you are a lifesaver, your instructions were simple and easy too follow. Thanks so much for your videos

[@johnny4jr.521]

Thanks for the info. I didn't know about the hard lockout, saved me a service call. Also, a short piece of 5/16" tubing fits perfectly on the end of the bleeder valve, allowing for a cleaner priming.

[@rach3lzUTube]

Thank you so, so much!! This totally got my furnace started this season! You're the best! Especially the long reset... we were so stuck until this!

[@EverydayHomeRepairs]

Happy to help 🙌

[@emivedmedia]

I just wanted to say thank you so much!!! This was the simple and perfect solution to my system just continuing to blow cold air. I am married with 4 kids and it’s currently 13 degrees outside and I’ve been dealing with this for a day at least. Holding the reset button for 45 seconds and bleeding the line of any air fixed it. Took about 3 minutes to get the right tools and we have heat!! Thank you!

[@EverydayHomeRepairs]

Great to hear and happy to help! Stay warm 🥶

[@TheChristianFangirl]

This is so weird. Back from 2012-2017 my family owned and ran a handyman service named Everyday Home Repairs. My dad, along with me and my younger brother, did the handyman work, while my mom stayed home with my baby brother and answered calls. (Well, my brother and I were a bit young to be much of a help, so we mostly handed tools and cleaned up) Imagine my surprise when KZbin recommends me a handyman channel of the same name.

[@hassanbazzi3545]

That must have brought a lot of memories. Very nice story

[@egold1006]

I did the same thing, noticed bubbles in the line as well. Just got a fill up a week ago. Working great now but scheduled a servicing.Thanks!

[@davidrein308]

Great video! Great advice! Got our furnace running with ease. Thank you Scott!

[@JohnMeyer-q8p]

Scott, you are a lifesaver! I was ready to give up at 10:00pm and then found your video!!!! I have heat now!! Thank you

[@EverydayHomeRepairs]

Nice, that is what we are here for and thanks for the nice feedback.

[@aidanhogg5146]

Simple and well explained video to execute exactly what the title says

[@dennisjue1533]

Thanks so much man! Watched a couple videos before I got the job done, yours was key as I didn't realize it might take nearly a minute on that button to reset the system (I thought I'd borked it).

[@bubbajones7486]

My friend! Thank you! You just saved a lot of people headaches and money. I ran out of oil because my oil gauge is stuck at the middle and I thought I had oil. Turns out I'm empty and I know I'll need to bleed the oil line.

[@EverydayHomeRepairs]

Been there, done that 🙂

[@rickschiaffo618]

Thanks Scott, turned off fuel to replace strainer, then system went into lockout. This vid help me get it back up and running. 👍

[@JRD77VET]

Thanks for the info. I replaced a dirty filter and a little later I noticed the furnace wasn't running ( we also have a Franco Belge gravity feed oil burner so our oil fired forced air system is backup). I must have gotten air in the line and after a few cycles, I'm back in business. Thanks again.

[@matthewshea7093]

Thank you for posting this video. This video, along with some friendly Reddit helpers, got my heat back on! Up until today I don’t know oil heaters had a bleeder screw like a brake caliper. It was 15 degrees today when we lost our heat and we did not look forward towards another frigid night. This video + Reddit really saved the day. Thank you

[@EverydayHomeRepairs]

Awesome, glad you got the heat back up and running 🙌

[@Gnik4144]

I’ve seen so many of these videos and this is the best one! Thank you so much!!

[@dward7458]

Awesome, worked like a charm once I got all the air out, wasn't sure about the 3 try lockout but this made it very clear :)

[@TheSkinnysmith]

You just saved me $300 bucks dude. Thanks!

[@EverydayHomeRepairs]

👊 nice!

[@jasperek]

Thank you! This video saved me at 3 AM in 20 degree weather with a newborn at home!

[@EverydayHomeRepairs]

That would have been a long night, happy to help 👊

[@stephanieervin1904]

Thank you so much for this video!!!! I'm a new home owner and am not familar at all with oil heating. Or an oil heater that heats my water😢 I followed this and got my heater on so I dont have to take anymore cold showers!!!

[@selophane43]

Can I tell you how much I laughed in joy when this actually worked. I thought to myself it seems scary with a flammable liquid and mechanical jawns all around but I know how to bleed brake lines on a motorcycle so it can’t be that hard. Great video and it worked like a charm on a Becket 750S

[@ericamassen3673]

Thank you so much. This was so helpful I was just about to give up and call the service tech when your video showed me just what to do.

[@EverydayHomeRepairs]

Happy to help!

[@Theshamingofjay]

THANK YOU SIR YOU SAVEED THE DAY

[@starrberryshortcakes]

Thanks Bradley Cooper! It worked perfectly!

[@Ander5806]

You can use 1/4 ID -3/8 OD clear vinyl plastic tubing and a container so you can see the oil when bleeding the oil pump makes it easier to see when you have a good oil flow or not make it easy to troubleshoot and life easier

[@jamestaylor4609]

I just moved into a trailer that has this exact furnace actually and when I moved in I found a orange juice jug that was clear and clear tubing I meant to throw it away but me procrastinating never did but what I find most hilarious is that I spent the last four days trying to get my damn furnace up Watch this video and I had to just reset my lockout thing

[@3THR33S]

Thanks a lot was freaking out, went into permanent lock out when i was bleeding it, there was a lot of air because I replaced the pump strainer too. They only thing written is after reset once call a technician.

[@roydanlobo123]

Thank you for the video , I was able to save $200 by just following your steps .

[@a.graham3160]

This worked like a charm!! The boiler isn’t that scary!! 😮‍💨💪🏽

[@EverydayHomeRepairs]

Awesome 🙌

[@100vg]

Mine is a Natural Gas Furnace, so I'll watch that one. Thanks, Scott!

[@EverydayHomeRepairs]

You bet!

[@69000andre]

Thanks to this video I put my furniture to working

[@DanielStreet2889]

Worked like a charm! Thanks!

[@5ive9inefx]

Thanks. I just tried it out and it worked. Awesome!

[@CBKDownShift]

Thank you for this!

[@thedrabfour]

Great information, Sir.

[@EverydayHomeRepairs]

Thanks!

[@BeckleyWrestling8]

Awesome video got me back up and running

[@alexk.366]

Thanks man, saved me from freezing night without heat after first time filter change😂

[@EverydayHomeRepairs]

Happy to help!

[@Sean-Aviation]

excellent video. are they run on disel? tank is empty and i need just a bit to get it going while renovating Also, are they much more expensive to run compared to electric heat umps? Not sure if i should consider replacing the unit with an electric one.

[@EverydayHomeRepairs]

I was running this one on Diesel during the renovation. I then eventually swapped it out with a Mr Cool Hyper Heat ducted system. kzbin.info/www/bejne/gHzGp4igeZ6BqLc

[@Sean-Aviation]

@@EverydayHomeRepairs Great. is that a DIY system?

[@satan5364]

Well that was easier than I thought it was gonna be

[@tymz-r-achangin]

Thank you. We even have the manual that came with our furnace. Under the entire section of "COMMON CAUSES OF TROUBLE" the dipschits who wrote this thing only gave the explanation of what the lock out is and then never said what to do for checking what caused it

[@MatthewFisher-ei5ug]

Hey Scott, did you happen to make a video when you removed your oil furnace when you switched over to the Mr. Cool Hyper Heat?

[@ffrwjr]

Thank you - saved me a service call!

[@getemboi2525]

Hi Scott. This video is very helpful and I'm doing everything you're instructing. However, I did a little over 10 iterations trying to get this flame to burn. My furnace hasn't been turned on for over a year. I wanted to see if it's operational. I put 15 gal of fuel in it and still getting air. How much fuel would you recommed to just see a flame started? Thanks.

[@EverydayHomeRepairs]

You probably have plenty of fuel just sounds like the line still isn't primed. I was having an issue where my fuel line filter was plugged. Once I swapped that out fuel was much easier to get through the lines to make sure the unit primed and was able to light.

[@getemboi2525]

Can you explain to me how I can prime it and even check if my line is plugged?

[@faisonlawgroup]

Thank you for this! It fixed my problem!

[@EverydayHomeRepairs]

Nice 🙌

[@MrPC1121]

Thanks, I have this exact model. You saved my ass!

[@robm.6400]

great video, what do I do if there is oil in/at the tank but not going to the filter outside the tank , clear filter just no oil getting to the filter, I dont have an air compressor , is there a way to clear it out with out an air compressor ? thanks for the advice

[@bobminnie8950]

Thank you for this video and your help

[@Samlol23_drrich]

Good video. I’m not in the business but I believe once the motor starts, you can simply jump out the safety and it will run until the air is all bled out of the lines and then you can close the bleeder and the burner will fire and you can remove the jumper from r r

[@mikechaves5203]

Perfect! Thank you!

[@48369bodini]

Thanks, newer digital worked great Beckett

[@HagerVids]

Bro. u are so awesome. i couldnt figure out why it wouldn't reset lol.

[@hamidghavi]

Perfect 👍 thank you

[@Buitrexx]

Thank you

[@susie8104]

Thank you so much!

[@guymarvel1837]

Thank you!

[@robertarmstrong2323]

Thank you..perfect video

[@EverydayHomeRepairs]

You bet!

[@jackburton2680]

My red interupted ignition oil primary control had a flashing red light/button. I pushed the button in and got two green lights (pump prime/flame) and then it fired up. 15-20 seconds later it made sputtering sound so i opened up the little pilot door tonsee if it still had flames firing and it made an awful sound and extinguished, shooting soot and black smoke everywhere. Guess i needed to do this fuel drain cycle thing you do here? Or was the issue i didnt hold that button for 45 sec, i just pressed it in real quick. Not big on DIY stuff involving fire and smoke erupting when and where you sont want it to if ya do something wrong haha, prob pay someone else at this point

[@justincase2281]

Great tip.👍

[@EverydayHomeRepairs]

Thanks 👍

[@bwasphaltpaving2839]

I’ve got a becket Deisel burner and I’ve got good fuel supply and new external filter I’ve checked the internal filter and it’s clean and tried the bleeding process checked the signal to the fuel valve coil and the controller is sending power to the coil to open it and it’s still not building any pressure would a bad coil to the fuel valve cause it not to build fuel pressure ? Or is the fuel pump bad ? Thanks in advance

[@Pauloreisf]

Thanks for helppp 👏❤️

[@EverydayHomeRepairs]

You bet!

[@yisraelkopman2990]

Thank you 🙏

[@lisabanik8035]

Thank you 😅

[@lesliehovey2258]

Thanks

[@justindezurik5369]

The hard lockout on mine was a result of a bat being stuck in the fan in the oil pump so you can watch out for that too!

[@halopcdraco]

I have the same R7184B and my fuel flows. I replaced the eye that detects the flame. Mine still shuts off after attempting to get it out of lock out mode.

[@harryfairman9766]

Thank you that's need-to-know information

[@EverydayHomeRepairs]

You bet!

[@kathrynleaser5093]

Hi ... No link to forced Hot Air culprit no flame. Appreciate the info if you can give the link. Thanks. Much!!

[@EverydayHomeRepairs]

Hey Kathryn, thanks for the reminder and here is the video link kzbin.info/www/bejne/qYPZeWCfpJKNqqM 👍

[@nelsontorres4211]

thank you!!!!

[@gabrielgundulf7139]

Have the same system and controller. It will run well after the reset and bleed, but if I turn it off for a couple hours, it will not fire again and I'll need to bleed it again. Then it works okay. I have a feeling it's sucking air back into the fuel line. Any suggestions?

[@MikeFrank-b8l]

Thank u so much it help me out

[@livinmontes167]

I have done this reset before.. but what can I do if there is no power going to the controler. No led lights at all. I checked the breaker, but that is not the issue. What can I do?

[@Rysdad1]

So is this what uses what people call "fuel oil" in the big tanks outside?

[@eveydaylife]

How many time can or should you repeat the process??

[@hassanbazzi3545]

Very interesting

[@UNCULTUREDSTEVE]

so i did the 45 second lock out and opened the bleeding valve. no air in lines but my furnace keeps shutting off after like 3 seconds. i tried this several times and still the same thing after 3 seconds of running

[@josephkhoury123]

Same

[@SnowGaming-lp3xg]

How do I get the flame to light, I've got a steady stream of fuel

[@skywizard3148]

You're the faaakking man!!!!!! Thanks dude

[@EverydayHomeRepairs]

😂 you bet!

[@Ghost_Os]

The video for the forced air one didn't pop up. Can you pin the link?

[@EverydayHomeRepairs]

Sure can, here ya go kzbin.info/www/bejne/qYPZeWCfpJKNqqM thx!

[@Ghost_Os]

@@EverydayHomeRepairs Many thanks!

[@tunafish3216]

You need to put a rubber hose and something to catch it on the bleeder so the fuel won’t go all over .

[@RG-tm7uq]

Yes, he must do this.. 😂

[@Whitashley1]

What happens if the bolt doesn't turn to bleed the furnace? I'm trying to bleed the furnace to restart it.

[@tiffanydaemer]

I can’t get my furnace to do a hard reset, what should I do?

[@Scott.Farkus]

Mine had rust in the small line that goes into the burner.

[@jamsatsolutions4479]

What about if it’s a Solid Red Light⁉️

[@charliefinning2237]

I love you

[@NightStrike]

I cant get a flashing light on the controller any ideas ???

[@Otis884]

Haven't seen an oil burner since I lived back east 25 years ago.

[@EverydayHomeRepairs]

Yeah, I am in the Midwest and they are also few and far between here. This one will be swapped out for central air in the coming months 👍

[@gregcollins3404]

I have an oil burning furnace. I hate the thing. I've never seen a piece of equipment with so many bad failure modes. Can be nothing but trouble. The fuel is cheap, but the trouble can be high.

[@gatsby6815]

Excuse me but are you a troll? Heating oil increased in price this year by 50% so it’s not cheap. If you clean your filters every few months the system is bullet proof. I’ve lived in New England for 70 years and never had issues with these furnaces.

[@CourageCanna]

Man im super confused! I held it for 45 seconds and now it completely shut off and the light wont turn back on no matter what i do...

[@xIIsTReeTIIx]

I did that and the light won’t come back on

[@K1LLADELPH1A-_-]

I had it going and now it won't start at all. Even after holding it down 😡

[@K1LLADELPH1A-_-]

Actually kicked on after an hour after that. Bleed the line