Everything You Need to Know about 300ZX Injectors! (And Why They Fail)

[@dannoyes4493]

What a great video. Very informative. You did it, Billy!

[@Billy_Built]

@@dannoyes4493 thank you sir 🫡

[@JoNoBaRr92]

Great info mate. I have had an idle issue ever since getting phase 2 injectors and have checked eveything else I can think of. Might be time to make the switch!

[@ghostsmoke11]

going from phase 1 to phase 2 was a pain in the butt. I'll probably get top feed once I get the opportunity to rebuild the motor and turbo upgrade

[@tayloraudioslc]

Thanks

[@gregspencer2083]

Switched to top feed Injector Dynamics few weeks ago after I had an AUS side feed fail, spitting an o-ring out and hydrolocking my motor after 2 tanks of e85

[@Billy_Built]

I've only heard of it happening a few times, but iI feel as though it's more common than we realize. Definitely a worthwhile, peace of mind investment!

[@gregspencer2083]

@@Billy_Built I luckily didn't bend a rod, pretty much happened at idle. Car died, fuel pressure dropped from 43 to 2. Turned it over, starter sounded like it fell out the bottom.. Immediately knew what it was.

[@jeremythompson6822]

The timing on this video couldn’t be more impeccable. I believe I have a stuck open injector dump fuel all the way back out my exhaust

[@Billy_Built]

@@jeremythompson6822 😅 mine use to clear out after running for a minute, but the first start would be an extended crank and then finally blw out the fuel.

[@jeremythompson6822]

@@Billy_Built I have a NA at the moment. 270cc top feed injectors are hard to come by.

[@Billy_Built]

@@jeremythompson6822 you'll be fine with anything 1000 or less on a top feed setup, but you would definitely need a tune.

[@jeremythompson6822]

@@Billy_Built awesome! I didn’t even know you could do that. I thought with NA there weren’t any options to do that.

[@LOVE-VIBES-X-PROJECT-CARS]

Good lookout on the bosch ev14. Ebay right now has them at 261.00. Probably gonna go that route.

[@dilpickle5435]

Currently have 300° fuel rail with Nismo 740cc injectors. I've never had any issues until recently... Even after getting the injectors ultrasonic cleaned, one is causing problems. I'm looking at going top feed.

[@rudimerm7686]

Billy, if I do fulfill my wish to own a Twin Turbo again, I will be making sure to do this.

[@Billy_Built]

This is the way🙏

[@localservicemarketing]

Hey Billy, I just got a 93 NA 300ZX and I was wondering if I can turbocharge this engine without having to do a full engine swap to a TT? If so, do you have any videos going into detail about this? Love your content!

[@Billy_Built]

You can. Especially if you have e85 near you.

[@localservicemarketing]

@@Billy_Built I do, do you think its worth the hassle and something you'd recommend?

[@nikolaiw12]

You should make this a series and talk about all things that make this motor suck from factory things maf egr ptu iac fuel and how to make it better

[@Billy_Built]

Good idea! I have a few already..

[@JP_SC]

Got the polar recently, only problem is it was conceived to go with injector dynamics idxxxxx 34-14 (34mm) and I'm struggling to find the equivalent from bosch. Do you by any chance know the right reference?