Everything you need to know about ECTuner Brake

[@SpyStaMia]

I would like to see the original EC as a device that threads on to an existing 5/8 x 24 and allows moderator usage (suppressor). Brilliant product, Mr. Cortina!

[@richerdandrusiak2225]

Nice Alpha Mount on your rifle. How do you like it?

[@stevensolinko8807]

You can do this. He mentioned it in the beginning of this video, and he has a video about it.

[@kronewittermike]

eric received my turner on a saturday of last week, took it to the range on monday i can't believe what this does after adjusting turner all my shots were under quarter. what a great product.

[@glennwood3912]

I put one on my 6.5 Creed Tikka T3 Tac A1. I’m happy with it. Tuner works as advertised. Recoil reduction is excellent. Quality product.

[@1cubsfan4life]

I have this basic same thing on an older Browning called B.O.S.S. (ballistic optimizing shooting system). Great shooting gun

[@tonylatham5915]

Erik: I've got my EC Tuner Brake mounted on my .30-06 Howa (sporting barrel). I went through the process with it yesterday. At #20, it shoots under .5". I put paper out at 300 yards and shot a 1-1/4" group. Now... I realize that in the great scheme of things, this isn't the kind of group that would turn your head... but this is a 7-pound, 400-yard, elk rifle. Thanks and both of my thumbs are up.

[@ArkansasBadBoy]

Not too long ago, I finished building a 6mm ARC longe-range bolt gun with every intention of testing the EC Tuner brake with all 3 of the Hornady ammo offerings (Black, Match and Precision Hunter). I got 2 boxes of each and thoroughly tested everything and was shocked at how effective this tuner was. Groups using the Hornady Precision Hunter had little improvement, but the Match and Black responded remarkably well with the Black being basically 1-hole groups almost impossible to measure and the Match ammo tuning to .234 !!! I will not be reloading for this cartridge. I bought every single bit of the lot numbers I could get my hands on and will simply enjoy shooting this gun and just sell the brass since once-fired brass is an easy sell anyway.

[@taylordoerksen4344]

Reinventing the BOSS! These would be awesome to have, I'll wait for the black to come out. Awesome craftsmanship

[@tonylatham5915]

It's out. I just put one on my Howa.

[@redstedman]

OK Mr. Cortina, I finally got time and conditions to do a little work. First I tried some 147 gr military crap and shot OK with adjustments to 6. Then I used “Atomic” 168 gr I bought at Perry. At position #6 I held .525@ 100. I only shot 30 rds. Lol. It works. I may find tighter groups yet but I like it already. (DPMS LAR ) Thanks. I like your videos.

[@danielbrothers2914]

I'm sure there are a ton of guys like myself that would love to hear more in depth detail about the C.H.BC.... Combustion... Harmonics... Ballistic (freedom seeds) concept .. or procedure. Showing the procedure on how to get low ES first.... then show the procedure of the harmonics... (seating depth). You have done well already about the seating depth... but can you show the best and quickest way to get low ES...? Thanks so much... you have GREAT STUFF... KEEP IT UP.

[@TheHurtlacher]

Just received mine the other day. I must say awesome product. Very happy with this purchase. Won’t be my last. Thanks again

[@fabianvaras1273]

I got my today I did put it on my bergara b14 hmr on 308 and firt shot when 0.7 mils up I did ajust it down 7 click and shot 3 round for grouping and I have to tell you shot basically one hole so I didn't have the courage to move the tuner open down way set up number 0 so I'm from Argentina the ammo here is pretty expensive and hard to fine I did use the hornary match ammo later on I will tryout longer shots for red stag season. Thanks for this product very impressive

[@bwr3rd]

Just purchased an ECTuner Brake in 6.5mm for my Rem 700 in 22.250. Thanks for responding to my previous emails. Looking forward to getting my load dialed-in for my next varmint hunting trip out west this Summer. Let us know when they become available in black! Thanks again, Erik.

[@rodneylane634]

Hi Erik--Just received your 30 cal Tuner/Brake. The concept is just fantastic, a tuner with a muzzle brake AND you don't have to have your barrel remachined. I have wanted a tuner for many years but I didn't want to have the barrel threads redone and your Tuner/Brake was just what I was looking for!! The quality is top notch! I am excited about trying this out (as soon as it stops raining)!! Great Channel and great videos. Keep up the good work!!

[@ErikCortina]

Thank you. :)

[@riflemania7178]

Not sure if you will see this Eric, but I received the stainless brake/tuner yesterday and shot it today….Wow! Tikka T3TacA1 in a 6.5 Creed…this was a really honest 1/2 MOA rifle with no problem…..setting of 4.5 and this is shooting .25” 5 shot groups all day long now….totally sold on this product….I’ll be ordering another one for my 6GT Open rifle now! Thanks for an awesome product….oh yeah, much better recoil management with this brake vs. the Tikka factory brake as well…gonna be a real hammer in PRS Production Class 🍻

[@BurnDuration]

I’m sold! Does it come with a “I neck size only” t-shirt?

[@johntaylor2840]

WORTH IT'S WEIGHT IN GOLD! I threw it on did some load work up found a good load 144 Berger and H4350 SD of 2.4 on my magneto speed. Loaded up 30 rounds took the magneto speed off and started fine tuning.3 shot groups starting at 1 to 8. Found it grouped well at 4 and 5. So I split the difference and wow! 5 shot group @.18 inches and .22 inches. Absolutely amazing product.

[@ErikCortina]

Thank you

[@johntaylor2840]

Going to have ordering one for my .30 today.

[@VictrixGladioV]

@@ErikCortinaHi Erik, I recently, last week, bought a M18x1 SS black EC tuner brake throughthr Spanish dealer. Apparently, my gun barrel has a M17x1 thread. Is there a solution for it. A converter or can you do tuner brakes with a M17x1 screw thread? Best regards,

[@fredwilliams7551]

very rarely a product works as advertised...EXCEPT THIS ONE WORKS 1000 PERCENT. BUY IT FOLLOW THE VIDEO AND SHRINK YOU,R GROUPS, BIG TIME...Thanks Eric just bought a new EC for my 338 lapua

[@charlesreid2141]

I agree with the comments regarding no muzzle brake. I believe that the world is going to suppressed rifles (ok well at least Texas) and being able to use the tuner with a suppressor would be great

[@danpollard4210]

EC tuner brake shows that perfection also shows physical visual beauty!

[@georgeholt8929]

Eric, So I was on your webpage last night 5/11/22 to order another tuner brake when I discovered I forgot my login password, so after going through the steps, I then discovered your purchase site either could not or did not send me a completed 'Change My Password Page', so I could not. I guess your site did not receive my payment via Venmo either. Sorry I can't pay via PayPal, they closed my account, for some unknown reason. So why cant we purchase via credit/Debit cards or why can't we purchase as a guest? Otherwise I impressed with the first brake and want to install them on all my bolt rifles now.

[@cwinter90]

Once you get them in black, I'll be a customer! I'm a Patreon subscriber and would have ordered one early but the only rifle I'd put one on it would look off. Another idea would be one that accepts the same threads but you can still put your own brake on. I currently use a JP Recoil Eliminator on my 6.5mm CM and it looks ridiculous but I really like how it performs on my rifle. I'm able to keep my shots in view throughout the entire shot.

[@stephenembrey883]

Always good informative videos I really appreciate the fact that you are quick to the point and don't waste my phone battery.😂😂

[@ahmedmanajid]

I've been waiting for this! Thank you so much.

[@saleen308]

Just bought one from DI precision for my Vudoo. I'm looking forward to trying it out.

[@jeremygeurtjens7593]

Just had my two EC tuners fitted...they look great by the way. I just wish I had known this was coming as I would have waited.

[@TACx3]

Received mine in the mail last week ! The candy sucker was great !! 👍🏽. Installed it as per Eric’s instructions and went out and shot a few ! The tuner does really help shrink my groups ! I am very happy with it ! Thanks EC for a great product !! 🤙🏽

[@professor_thunder]

I hope you sell a million of them Erik. Cheers.

[@robwebster2562]

Yup. answered all my questions. Going to check my threads and order one. And thanks for the .338 info.

[@KevWilOG]

Just received mine today, can't wait to try it!

[@wickiuprat]

Let us know if it improved or widened your groups!

[@manuelvargas2608]

Just got mine in black. Can't wait to try it out!

[@endutubecensorship]

How is it?

[@manuelvargas2608]

My 10 yr old girl can shoot her 308. Nice.

[@endutubecensorship]

@@manuelvargas2608 That's awesome, way to go Dad! Your young lady will remember these fun times forever.

[@manuelvargas2608]

Thanks. I'm still waiting for time to pick the ammo the gun likes and tune it. Hopefully taking her on a Nilgai hunt next year. I can attest to the brake working. She said it felt slightly more than her mini 14. No flinching and no bruising.

[@timkourbo3196]

Excellent content, Erik. Just bought one of your tuner brakes in SS. Thank you.

[@ironDsteele]

Very cool device. Similar to the Browning BOSS but much more user friendly. Tune the rifle to shoot the ammo rather than vice versa.

[@quintenbeets9613]

Just want to say thank you for all your effort and time to show us about reloading as your videos learned me a lot and convinced me to get my reloading setup ready for when I get my rifle.

[@GaryBlankenship96b40]

This is great idea browning has had similiar system on their rifles for decades but cannot add as aftermarket. Not sure how effective would be on ar systems but for bolt accurate guns could be a plus.

[@JerrBearTactical]

I'll be ordering a couple of these from you in the near future. Great video Sir and you answered all the questions I had about this brake😉👍🇺🇸

[@ramsaycountry1177]

That's great Erik, I'll be looking for those 3/4x24 brakes to be released.

[@trentmitche11]

AGREE 100%

[@PrecisionRifleNetwork]

Cool, looks like a great product.

[@rdsii64]

I just put a deposit on my new barrel. When its ready to be shipped and I pay the balance, I am ordering an ECTuner!

[@deanarnold6933]

Great product mate , could you please do a video on scopes and magnification needed for f class / long range shooting ? Love everything you post keep it up mate 👍 Cheers

[@calvinlayport3127]

Got something like the Browning boss I can testify the boss works and works good my boss is on a Browning a bolt ll long range Hunter 7mag IV got it where I can shoot 150 -165-or ,175 just by adjusting the boss not the scope so I'd bet anything that break he's got will work two

[@rtfjet7]

Bought one. Love it. Definitely effective.

[@TheMerlinmk19]

Chomping at the bit here...can't wait til it comes!

[@txrcnoob]

Damn that it pretty slick. Now I think I may need to get my Barrel threaded.

[@franckmoris7]

YESS just bought one ... really can't wait to see that

[@jaredcrowley5666]

Erik, can you add a sign up to be notified of the black when it comes out?

[@stevecarpenter98]

Since following you I've been intrigued on your tuner and muzzle brakes. How well does the muzzle brake work? I'm trying to tame my 308 down. 2:28

[@saywhatyeah3076]

Fancy! David Tubbs been doing it for years

[@DSMattitude]

Its kind of like an improved Browning BOSS system. Nice.

[@drone4higher]

Thank you Erik

[@wvlongshooter3912]

Thanks for doing this vid and I now understand it’s threading.

[@danpollard4210]

I think EC tuner brake is a product born from the realm of Pure Genius.

[@metalisit]

Will definitely be ordering one at some point.

[@desertfarmer248]

I so need one of these. Great stuff sir.

[@robertpage2927]

Been checking prices for threading barrel about 125 to 150 east Texas

[@patferebee647]

Wanting one of these in black for my lapua

[@hmoobshow2482]

Will be ordering one in black when they come out

[@chrischreene1547]

Just ordered one. I can't wait to get my 6.5 prc built. Everywhere is literally all out of stock on bartlein .264 barrels -_-

[@MatthewsFabrication]

Ordered one of each. Thank you Greatly, 👍🏻👊🏻. Sincerely, Matthew

[@jcemitte88]

I'm excited to get one. Short of my hunting rifle, all my rifles will start getting one of these bad boys.

[@donaldslayton2769]

New subscriber to your channel. You are costing me a lot of money on gear. Long time 7mm rem shooter.

[@go-wycowboys5018]

I don't understand how you get better groups. The whole concept? I was shopping for a brake when I saw this video. Any help in understanding how it does this would be great. Love what you are doing and thanks for all the great videos and help!

[@ErikCortina]

The tuner influences barrel harmonics in order to influence group size.

[@go-wycowboys5018]

@@ErikCortina Thanks!

[@metalifann42]

This is awesome. Just ordered one.

[@darktrojan00]

you should make a smaller version for the ar15, you would make a killing cause there are a lot of those rifles and a bunch of ppl who are not precision shooters but would like to have it just to get their rifles tuned in other words( a bunch of suckers who dont really need this product but would buy it anyways) XD count me in on the suckers group

[@Dwayne7834]

Thanks for the information and video.

[@redraiderreloading7612]

Awesome.. I bought a harrels but I like yours better.. lll be ordering one

[@johnmckinney1493]

Building a armalite 308 upper. I see your brake in my future. Going to use a bsf 18in barrel

[@JLR77]

Go with the 20.5” bsf barrel. Ive got one on mine and im shooting 175 grain sierra match kings with 42 gn of imr 4064 for .38” groups

[@chriskloster13]

Just placed and order! Would Love to see one in titanium

[@markgoldstein3933]

love your vids erik thank you i was wondering if the tuner would work on a beggar b14r with the carbon fiber barrel or the harmonics are different with this barrels ? thanks and keep up the great vids there full of great info .

[@twestgard2]

If I change my load, I assume that means I need to retune the device for the new load?

[@SigmaBallistics]

Of course, you are changing the harmonics with a new load

[@TXPhred1]

Yes, just make note of the setting for each load provided you will shoot the load again.

[@moomoomlik99]

Would like to see a video on the next gen break

[@anthonygendron9737]

This would be nice for my 450 Bushmaster.

[@dragenzfyre01]

Eric, could you do a video with and without the ec brake "brake" performance? as in how much movement, rise, recoil, the rifle has with the ec brake and nothing. thank you.

[@wickiuprat]

I want to see some reviews on this from someone without a dog in the hunt!

[@InvestorAcademyPodca]

Great news, having to find someone to cut my barrel for the original was a serious impediment to getting one. Have you considered offering a tuner without brake that threads on like this one? Basically an original tuner that can thread on the barrel without having to do the custom barrel work.

[@W5rr2nG]

Waiting for him to do it too

[@RJ-sr5dv]

I bought one that clamps on YEARS ago. It was made for a specific barrel diameter. Can’t remember who made it but they are out there....

[@daxbrydl2582]

I wondered if there is any way to work up a load while having the EC tuner brake on the rifle. I understand the tuner is to help dial in a load, but I would like to use the brake to reduce recoil while finding a good hand load for the gun.

[@rodneydavis8110]

I absolutely love your Videos, Please do not listen to the Haters What triggers do you use on your AR’s and how many pound do they break at

[@ErikCortina]

Giselle 1.5 lbs

[@161Sheriff]

Your a multi talented fella.. I like it

[@johnwilliams-gk1fb]

I love the design, ordered one today, will order another if you can make 6mm

[@johnwilliams-gk1fb]

Because I need the extra 2% 🤣

[@sparkyferret550]

great video, have you looked at the structured barrels ? Any thoughts on those ?

[@betocool78]

Eres un chingonazooooo éxito siempre

[@guardianminifarm8005]

Excellent. Thank you sir. Looks fantastic. I have an older unthreaded rifle. Is there an offering available that "clamps" on or is it best to have a gunsmith thread the barrel? Thank you again.

[@lonecrapshooter6197]

Here's everything I need to know about my E.C.TUNERBRAKE on my AR-15 BOLT ACTION 6mm ARC. * on zero, about an inch * on two, just over half inch * on four, about .360 inch " on setting six, two shots same hole, so I fired a third shot just to make sure it wasn't coincidence or luck, nope, I'm good on setting six.

[@stevegarrett4869]

how about making the original but work on barrels smaller than .850 I generally don't like muzzlebrakes. or consider having one that works with a suppressor.

[@thomasmann9865]

Erik, I ordered one. I see that it works based upon your demonstrations (video) but still question why it works. Did I miss a video?

[@stevensolinko8807]

@@CamaroZ28Nut3 I don't understand how making that small of an adjustment really affect the harmonics that much, given how quickly the "harmonic pulse" is moving back and forth.

[@mr1234tempo]

So can or do you manufacturer tuners for air rifles? I have a .30 cal. LCS SK-19...Has a Lother Walther barrel with a 1/2 20 thread to accommodate a DonnyFL Emperor moderator.

[@josecanisales3491]

Eric, do I have to have the barrel muzzle end threaded?

[@williebulletman5217]

Looks like i need to start saving the money for one of these muzzle brake’s

[@alstar300]

Would I expect to need to adjust the dial/harmonics with different bullet weights?

[@jeffstevens156]

Thank You.

[@hongsenyu8108]

what's the weight of this tuner only?

[@IronPauli]

I really like this product

[@lightningstruck93]

Erik, what is the best method to clean the brake? I'm guessing submersion in solvent may deteriorate the tuner part(guessing there's an oring?).

[@TheWonderman1964]

Hi. I am just wondering how one single turn which moves weight forward 1 mm has that much effect on impact .

[@puterarayhanhidayat8070]

is this work on air rifles as well ?

[@northman77]

Haha.. Ma man! I didnt feel the need of it until this morning.

[@seanhines5721]

Waiting patiently for the 5/8-24 Black Nitride........

[@fasteddie9502]

QUESTION: How is this tuner brake used during a load workup? I realize that after a load is found then fine tune. Any guidance would be appreciated.

[@wingding028]

what about for accuracy international threads 18x1.5

[@tommywalton1974]

“As long as you have a barrel” 😂😂🇺🇸🇺🇸

[@hmoobshow2482]

This brake is for sporter rifle barrels?

[@clarencemoore7865]

I've got a savage 12 fv in 22-250 with a 26in barrel and a 12 fv in 6.5 Creedmoor but its not threaded can i take it to a shop here and have it done. Im shooting 5 shot Dime size shot groups on the 22-250 and quarter 5 shot groups with the 6.5 i don't shot competition. But iv been flowering you on youtube. I was perty much satisfied with them till i started watch your video's now im so disappointed that i can do better.