Evil Tech Rises!

[@w4stedspace]

Never knew you could feel physical pain through the internet...

[@viperscot1]

Yup I did too OMFG

[@planetcaravan2925]

Man up

[@owenfast]

Yeah. This hurt my soul.

[@Tinblitz]

Honestly, If i was an aspiring tech, and Neg spoke specifically to me, telling me off like a disappointed teacher, I'm not sure how I'd handle that.

[@BugStomper]

This is facking epic! Warranty sticker... ?! "Get the fack off my channel!" LOL!

[@ringmastermodels]

The warranty stickers. My God, That’s criminal. Not only is it damn cheeky, but it suggests a sense of *pride* on the tech’s part. He put that shit together and thought it was good enough to protect. What a loser.

[@kd-vx4ho]

ffs thought my first tech work on my own aeg was bad lol, but this is legend!

[@offender0]

Lol same. I'd only ever do tech work for myself because I'm the only one suffering my own shit show.

[@olek8129]

Luke's Airsoft Nightmares

[@ALTH16]

Shit like this needs naming and shaming. I know youve seen poor shoddy tech work in the past but this is a whole new level

[@NegativeAirsoftTech]

Nah, this gives people a chance to change their ways or stop.

[@ALTH16]

@@NegativeAirsoftTech I'd imagine they'd stop after seeing this for sure!

[@NegativeAirsoftTech]

@@ALTH16 would be better to learn a lesson & improve

[@viperscot1]

Agree but that's up to Luke Think he's giving the person a chance

[@CarBomber1964]

To start changing their ways? Or to start changing their name. ​@@NegativeAirsoftTech

[@doodlepugg]

Wow, that makes my most bodged efforts look professional

[@darrylb110]

These people must cry when you send them the videos of the teardown and rebuild

[@NegativeAirsoftTech]

@@darrylb110 they ain't thrilled...

[@stickypickles22]

You need to make a patch of that warranty sticker please haha

[@mr.airsoft8295]

Damn what a mess, I run into similar findings working as a tech in the auto industry. I always wonder how someone can mess something up so much.

[@danielott6388]

After watching it a second time seems fitting to place it in the "Hall of Shame". Though this is more of a nightmare.

[@DartzIRL]

The quality of this work caused my laptop to bluescreen in horror. The warranty sticker is probably structural at this point.

[@charlie91757]

waiting for you to do a series where you send stuff to techs and review what you get back , using a separate name and address obvs

[@NegativeAirsoftTech]

It's a great idea, but it's too far removed from what I want to achieve which is other techs becoming so good that I can't get any business & nobody gets scammed... Leading people into a room would be just inflammatory, it would be crass. Even for me.

[@charlie91757]

:) these clips make me fear going to other techs you need a luke approved list ;p

[@Creationeer]

This build is actually horrific and causes me pain

[@darkshock42mlg05]

I'm not good at teaching and not even I had it that bad. I failed to shim the bevil properly which is why it stripped and the selector on 1 side was incorrect.

[@braf7349]

And I thought finding cooked ramen noodles in my gearbox after going to a "tech" was bad. Holy shit!

[@orkharrid7065]

The biggest horror here is that because of the legal minefield with naming shoddy techs, you can't (yet), which means they are free and clear to inflict this kind of pain and suffering on other poor bastards. I think that ANYONE who has works done by a 'tech' should have something in writing from said 'tech' complete with a list of works carried out. You wouldn't take your car for work and NOT get a receipt of bill of works for example. Start doing the same with techs people! I give my sons a bill of works if I work on their kit for them, my sons..... If a tech refuses, go elsewhere. Also, I love this format and think more are needed; similar to the old fright night programme on Friday nights :)

[@WroobelChannel]

Gordon Ramsay of airsoft tech 😆

[@MercutioUK2006]

The biggest question for me is......Will the tech actually care enough to sort his shit out? I bet this isn't an isolated case.....

[@apathtrampledbydeer8446]

Evil Dead? I like!

[@RhysLawless]

We shouldn't be so harsh on people, it can't be easy being a blind Airsoft tech.

[@Lozart]

I reckon the warranty sticker is there to put people off opening it up and finding out what a shit job he's done.

[@kennethsibson6449]

Luke ....time after time we see this .....why why why.....do these people continue to operate 😢 and get repeat work .......is beyond me

[@BeGeGames]

Hey Luke, if the spring guide and spring are not straight when changing to a stronger spring (It's tipping a bit upward or downward), can I still use it or is the spring too strong? The spring guide doesnt have bearings, don't know if it makes a difference with it.

[@NegativeAirsoftTech]

The screw will lock it straight

[@BeGeGames]

@@NegativeAirsoftTech There is no screw

[@NegativeAirsoftTech]

@@BeGeGames so.... screw

[@KamikazeBoskiWiatr]

honestly if i saw a gun like that i'd remove the ETU and just powerwash the entire thing

[@Woodland_flanker]

I’m here fresh from Patreon to see the aftermath and the rest of the build or rebuild 😂

[@ShetlandTec]

I fakn hate this people, I've saw a lot of this kind of builds in my years as a tech an I can't hold it either, nice move showing this in your channel, RIP 🙏

[@fatoldairsofter]

Some people obviously have no shame, that’s a proper ‘back street garage’ ‘bodge it and scarper job’ - effin bell-end

[@planetcaravan2925]

Proof?

[@BewilderedDuck-e5l]

@planetcaravan2925 Did you watch the video?!

[@NegativeAirsoftTech]

​@@BewilderedDuck-e5lhe's trolling you. It's his thing.

[@MCD10000]

how do I (a person who only just started Airsoft, who tech's my own stuff) do better work than some site techs

[@MGlBlaze]

It's completely fucked. I'll never understand how someone can fuck things up that badly outside of malicious intent.

[@ringmastermodels]

You’d be surprised what some people will do to stuff, often that isn’t even their’s, and certainly for money. I’m in the model railway biz and lemme tell you, some real shit has come through my hands. Some mutants are just THAT negligent and lacking of any courtesy. They don’t care, because tomorrow it’ll be out of their hands and they’ll be in the pub.

[@tajniacctajni7548]

Hallo Sir Negativ,I got a m4 that i am working on and i got a problem where is change the oring but i still lose air from the back of the piston.Can you help or explain why?

[@mr.scrubmuppet7131]

7hours.... Man i need to chill on clicking your vids. Iam starting to look either creepy or desprate for attention.😂

[@lukescattergood4191]

The video meh same shit different “tech “ but the use of music 😂 brilliant

[@sj_asc5950]

You might be able to understand at least some of the chaos if it was someone doing their own work for the first time. You can see the marks on that bevel!, there’s no way that the builder could have honestly tested that and believed it sounded healthy - to then wack a warranty label on it is just plain cheeky. Excessive and some overkill parts huge waste of money from the get go.

[@jorgeemidio7507]

Wait a sec... I usually put a tad of lithium grease on my gears when I'm doing maintenance work. Is that bad?

[@Eloy_95]

No, it is'nt bad. But the lithium grease is designed for metal vs metal (with exception of some brands that use chemical additives for avoid damaging plastics) If you put a generic lithium grease on the compression parts or your piston, you can damage this plastic components. For compression parts, you can use medium density silicon grease like abbey, molykote55, etc.. the is a lot of brands to choose. So if you want to use lithium, only in the gears and the motor pinion gear.

[@jorgeemidio7507]

@@Eloy_95 bless and thank you dearly for the information.

[@wesleyjansen2353]

im learning to be a tech. althou most of the stuff i understand you should NOT do. But i wanna make 1 of my guns a DMR. Got a hybrid perun in it to make it fully signle shot. As i read now i shouldnt have a light weight piston in it. What kind of piston should i have in it? other things that a DMR needs to have replaced? Maybe a video about what you should do to make a normal AEG a DMR AEG?

[@joelcastellanos7224]

Damn. Even when i started messing with airsoft guns i never messed up something that bad. Im a total amature but come on. Any one with eyes could see that was going to destroy parts. (Dont know why the teath would score the cylinder, but ive never had that issue)

[@MasadaGbTech]

What a train wreck!

[@MakalaureKanafinwe]

I love me a good slow clap.

[@iAshh]

Hey, at least the nozzle wasn't drilled

[@fubene5495]

But it worked 🤣 not saying it worked well, but... lowered the fps enough to be legal hahahaha And you can always refill the whole with putty 🤭 That tech said he couldnt change or cut the spring, so mutilation was the only way, letting the guy play with a 5fps over the limit gun was never an option or use DMR rules.... I really think that was like an "ego show" something like "dont worry dudes, here i am, ill fix it" waiting for the applause of the masses

[@tastyfish1032]

Nice job…

[@adamkindon]

Fair play to you sticking to your non name and shame, In another sense its a shame people dont know who this is and they can steer clear. (Sierra from the Chairsofter show)

[@NubbyEvo]

Everything you showed looks like an advertisement for ultrasonic cleaners.

[@MegaBitesCatering]

This is so fcking bad. The owner of the gun should confront the guy. I hope he didn’t pay him for this.

[@wishdeus]

I would just like to say I finally got my hands on a vfc 416... after all of your videos on vfc I still think you didn't quite get across how truly awful they are. It is such a nice feeling airsoft replica but the tiny screws and ridiculous way it has to come apart is so irritating nevermind the parts inside are basically strengthened cardboard. My friend got the thing second hand and it looks like the guy stripped the hex screw on the mag release so I had to spend almost an hour drilling out the freaking mag release because why would you do it the same way everybody else does it when you can put a .9mm hex head screw in it with a gallon of thread lock. It was shimmed well though

[@viperscot1]

OMFG he might've just got a new gun saved him lots of money so shameful to see this Wow who ever did this shouldn't be a tec in my opinion

[@hyperslow556gungamer]

I think when I hit play I got a metal shaving in my eye?

[@wagnuts]

When I witnessed this horror, my lovesense fell out!

[@JonStockman82]

wouldn't be a guy from Scotland by any chance?

[@crewgadjy]

Wow.

[@anthonyseverino8292]

Should have teflon taped it

[@arvo_septus]

Was this worth salvaging? Seems like you have to just get a new gun at this point.

[@NegativeAirsoftTech]

The same shit would need changing to make it work... Plus, parts our of this that weren't suitable for a DMR went into his Specna

[@cozza1996]

Now thats haunted to fuck

[@rubenjanssen1672]

a vid on ths channel without banter Luke was pissed. props to him for sticking to the no name nad shame

[@NegativeAirsoftTech]

I won't shame peoples nads

[@rubenjanssen1672]

@@NegativeAirsoftTech to me ones who sitck to there beliefs on what is good and right. that is comendebel

[@britishbob27]

Holy shit, you're 3 months too early for Halloween...

[@vulpix9210]

I am not a tech that works for money. I ONLY tech my personal collection, and IF and only IF my friends ask me to fix or improve something on their replicas. Because they KNOW my work and how I do things. How the FUCK can you mess that many things up as someone who has seen atleast 30 times the amount of replicas as I did. I do not fuck things up that bad. I am not perfect, ive fucked up part before, ive messed up gear teeth before, ive messed up tappet plates, hop up units before. But only on my first 2-3 times till I learned how to do it RIGHT.

[@fubene5495]

You forgot to show the rust Luke, the rust!!!! That poor gun was terribly build, death wounded, and left outside during the monsoon to finish the job. Besides all being badly done, the metal filings all over the place and the wiring being trapped everywhere is what hurts me the most, I can't conceive how this is possible, at least use your bloody finger to clean "some" of the metal filings

[@planetcaravan2925]

Why so serious?

[@MikeHuntsPews]

I wonder if people are doing the worst builds imaginable to try get onto a video 🤔

[@ikharus1]

😧😧😧😧😧😧😧😧😧😧

[@zzzzzao]

So. A complete write off with expensive parts. This is turning into a trend. A very sad one

[@stevenseeuws2321]

But did you die?😂

[@error262]

Reminds me of chinese products with QC stickers on them Seems like there's hope... hope that the sticker will fix it so don't remove it...

[@basserben89]

Is this just a bedroom tech helping his bud, or are we talking someone who advertises and charges for the service? I think my first ever shim job was absolutely better than that, and I'm not bragging...

[@NegativeAirsoftTech]

The latter

[@basserben89]

​@@NegativeAirsoftTech😬

[@ianaumy]

I did better work than this “tech” at 13

[@mr.scrubmuppet7131]

I felt ashamed looking at this and hearing lukes voice. And iam not the one who did this tech so... Sucks to be you whoever did the tec..welll🫣 work? No not that either.. what do you call this anyway? Theft?