Evo Transfer Case Removal // EVO 8 EVO 9- Boosted Films

[@NateTheGreat9708]

Just finished taking out my Transfer case based off this video, followed every step. Awesome video!

[@andydhillon1977]

Excellent video! I'm in the process of prepping the engine bay to remove the engine and transmission. Is it possible to slide the transfer case off the transmission, leave it sittimg on the subframe where it is, and still remove the engine easily from the engine bay through the top?

[@BoostedFilms]

Yes.

[@blairguinea1337]

Nice job man, very helpful and yes of course a hoist make such a difference............I am on the ground getting my gear AND transfer case off my v6 vr4.........nearly there , but there is a bolt snuck up behind the case, yeah awkward position. Thanks again, i will give you a million thumbs up

[@BoostedFilms]

I give you credit for taking on such a project! VR4's are cool cars though, so i'm sure its worth it :)

[@jasonblack4729]

Boosted Films can you help me I trying to take mine out of the evo 4 and the shaft just won't move past a certain point or am I not roughing it up enough

[@BoostedFilms]

CV shafts? they take a bit just should pop out with a good quick pry.

[@jasonblack4729]

Boosted Films not the CV's the small shaft in the center that both of them were attached to it goes right from the gearbox to the transfer case.

[@BoostedFilms]

Do you have a slide hammer?

[@2BMIKE1569]

Great video! I have one question if you could help ?I'm in desperate need of the torque number for the four bolts that hold the tail stock to the transfer case, I've searched everywhere without luck.....Cheers

[@BoostedFilms]

@barnchips Did you notice any metal chips when you changed the fluids? I'd be willing to bet its the T-case.

[@barnchips]

great video I have a 2003 evo 8 and I'm curious about using amsoil in my transfercase rear diff and transmition was wondering if anyone else has tried it and if they can recomend it over the oem oil , my car is a little noisy i may or may not have a bad transfercase as i know some noise is normal but i'm looking to re do all fluids and see if that helps it first any recomendation on the fluids to use ?

[@bigguns1997]

@freeflyeric If your tcase is bad it will whine super loud. After whining awhile it will clunk and eventually lock up. Maybe someone screwed up your clutch install. Also i have and evo 8 so its non acd. Do you hear any noises

[@djsteve1987]

6:50 - I have a question regarding ACD pump hose...How did you stop it from leaking when you removed the banjo bolt? I have the same problem every time when I do this since the line is lower than the reservoir. Great Vid by the way !!!

[@freeflyeric]

I have a question reagarding my evo. Non ACD tc. I had a new clutch installed with new clutch plate, pressure plate, resurfaced fly wheel, new throwout bearing, but my car is barely moving on first gear, even if I step on the accelerator. Feels like the clutch is slipping. Could this be a transfer case problem? Thanks for this info on how to replace the transfer case. I just want to be sure before I tacke this job. Any info would be really helpful. Thanks.

[@jasonclarke6065]

Hi im doing a transfer case on my vr4/evo4 and just wanted to be clear do i only put oil in the side bung, and does the gearbox feed oil through to the rest of the transfer box? cheers

[@ramoncruz4891]

You are a life saver thank you so much!!!!!!

[@dontGet2sirius]

When using the slide hammer you can get the harmonic balancer removal tool which adapts onto the slide hammer and using the bolts provided will make the job easier if you don't have that custom tool.

[@BoostedFilms]

@evofreak1304 Sounds like a possible transmission problem. Usually a bad transfer case will also whine during acceleration. Unless its a quieter whine that isn't heard under acceleration simply because of the engine noise being louder.

[@RichJ_youtube]

Thanks so much for posting this.

[@evo9man]

how long is this process? how much should I expect to pay for a shop to remove my t case?

[@adrianTNT]

Can you tell me if I was supposed to have oil coming out of the gearbox from the axle that you see at 8:30 ? We replaced some seals on the tcase of an Evo X and oil started to come out while taking the tcase away from the gearbox (tcase was already empty), I think it was gearbox oil and coming from that gearbox hole at 8:30 but I am not sure. Is oil supposed to be there? Thanks.

[@bigguns1997]

Love the writeup alot easier than what i did. Next time im doing it this way i got a trans to get rebuilt

[@Gabe511]

What if i was swapping out an OEM open diff for an OEM LSD? Are all these steps still the same?

[@jdmfreak92]

I'm jealous of your shop man :D

[@h22sparkle]

@barnchips if it whiles then yes you will need a rebuild send it to shepardtranmission im about to do the same for it to be inspected and rebuilt.

[@soldi3rappl3]

@freeflyeric sounds like u got a blown trans. the way you telling it seems like you have a slipping clutch but you also said fluid was everywhere

[@PiroFyre]

Is a non-ACD TC easier to remove?

[@irvingchavez9522]

can you please post a how to install new pistons on a evo 8 please !!

[@IaintTrynaGoOutLikeBIGnPAC]

Great video!

[@charlesoldendorf1717]

2004 Mitsubishi Montaro stuck in low range ! Opened top of transfer case prong on driver side doesn't engage passenger side works fine ! Driver shifted at 30 mph !

[@parralegend]

you are dedicated :) Wish i had a hoist at home

[@BoostedFilms]

@PiroFyre Unfortunately no, not really.

[@barnchips]

can some one watch my video " evo 8 whine help " I'm not sure if my tcase is bad or if its rear did rear diff it only does it when the gas is ON and its way worse in 5th gear then 4th its not super loud but can be anoying and i just wonder whats causing this whine I changed all fluids but still whines

[@markrampersaud]

use a 2 by 4 and a jack to keep the motor out the way.

[@FCT8306onTwoWheels]

This was interesting to watch :)

[@PiroFyre]

@evofreak1304 Asked a friend this about my rear diff and he says it's a healthy whine.

[@mrobinson75]

Nice walk though.

[@bigguns1997]

sheptrans get it rebuilt