Evolution Mag Drill - Unbox and Test Out

[@BushdogRentals]

Tack them all together. Drill the holes. Grind them apart. Quick and identical. Keep up the good work!

[@jayyambrovich3740]

Congratulations Rachel. I too am an Evolution Power Tools fan!! I have the 14-inch chop saw, the 8-inch multi-material circular saw (able to cut metal up to 1/8-inch thick), and just got a birthday gift for myself, the 10-inch dual bevel miter saw with MSS+ heavy duty stand. I would love to have a mag drill but that is way outside of the scope of my needs so I have to be content with watching other fans like you use and enjoy their Evolution mag drills. Cheers from an American who has retired to Portugal and is learning metal work 😊

[@rachelbohnet]

Love this. I'm really into getting the circular saw as well, hopefully one of these days I can add it to my collection. The miterng saw is definitely worth its weight in gold.

[@tsmartin]

I used a Milwaukee at work some years ago to drill out some seized 2" dia x 6" long clamp arm pivot pins. It took awhile but I got it done.

[@ed6837]

Back when I was working, I had seen mag drills used but never used one myself. One of the most awesome machines made. We had a steel I beam frame to drill holes and mount. I thought it would take all day. Got the frame set in place and assembled then went to lunch. Came back from lunch and We drilled all the holes after marking with a transfer punch in 45 minuets. Couldn't believe it.

[@billcovert3473]

I work out of mechanic service truck. It was not to safe drilling in the vise and standing on rear bumper. So I got the Evolution drill. I took a 3/8 plate about 18" x 24" drilled 5/8 holes to mock a fabrication work bench, built some clamps. Welded angle bar on bottom to mount in vise. Now I got a drill press on the truck.

[@rachelbohnet]

That's perfrct! Nice work!!

[@jeff-je6rm]

Mag drills are an indispensable tool in any fab shop. Bits are expensive , but well worth the cost. We use them every day where i work, from drilling holes to countersinking . Hard to be a fabricator without one. :)

[@rachelbohnet]

It's gonna be a game changer for sure!

[@stevenginnever5343]

Great video, love the enthusiasm and excitement, when trying a new piece of kit. I feel the same, just can't do the moves anymore. I have the same drill and it's first job was to drill approximately 100 16mm holes in 10mm steel for a fabrication table. Breezed through it and the annular bit is still sharp. Next project maybe?.

[@Prariedog]

Can't wait to see more of your clubcab truck build,you will love the mag drill

[@mico26az]

The 14" blades to cut metal last a long time also the 14" dry cut chop saws are great have 1 in the shop with hundreds of cuts mostly 14g material Circular saw is great also

[@eduardopekurned1505]

That drill the ticket and I used one that had a beast of a magnet, even for vertical application where the magnet can support my weight. Have a little oil can to cool the bit.

[@ethank7293]

Congrats on the upgrade, definitely having a mag drill in your weld shop will make life a lot easier and being a welder myself I absolutely love the mag drill all the time.👍❤️

[@rachelbohnet]

I always love the tools that make life easier!

[@ethank7293]

@@rachelbohnet true very true!!👍❤️

[@davearce3115]

Nice tool addition to your shop 🎉

[@CruiserMac]

I have a Milwaukee Mag Drill, don't use it a lot but super handy when you do need it.

[@rachelbohnet]

Definitely not an every day too, but so handy!

[@grumpyguysoutdoors]

I have been wanting one of those for a long time too. I am so jealous!

[@billyshumate853]

Great video and enjoy the mag drill 👍

[@rachelbohnet]

Thanks!!

[@rolandtinker734]

Love the videos ❤ Have a great day Rachel (the dance is lovely)

[@rachelbohnet]

Have a great day too!

[@leonardohard9604]

bien. te felicito. un juguete mas para tu arsenal de herramientas.

[@donyboy73]

I have the same one to review!

[@rachelbohnet]

Can't wait to hear what you think!

[@donyboy73]

@@rachelbohnet I sent you an email a few weeks ago about contacts of other companies.

[@steveblack1753]

Just like a kid on Xmas morning LOL great video 🤙🤙

[@Randysopinion]

Awesome 👌 great tool to have.

[@rachelbohnet]

It really is!!

[@michaelharrisson1683]

Great review! Strongman is gonna be good this year.

[@FlorencioRivera-ei6ms]

Nice job , great tool

[@rachelbohnet]

Thanks 👍

[@jimhopkins4062]

Great reviews! Keep them coming.😊

[@rachelbohnet]

Thanks so much!

[@Randysopinion]

I have a question. What do you use to keep your welding table from rust?

[@rachelbohnet]

Well my table doesn't get wet often, and it's not humid in my shop..Plus, I constantly am grinding spatter off the top, so it never gets a chance!

[@randeashley4900]

How far along is the Viking

[@Randysopinion]

@rachelbohnet it's humid here in Ontario rust forms quickly maybe mineral oil

[@royl9858]

WD-40

[@fdnysqd41]

wait , there is a drill in this video?

[@ronduncan2737]

Great videos Rachael. Get yourself a mic for your recording. Better sound better videos. Keep it up!

[@rachelbohnet]

Yeah, I sure do need a better one!

[@1944chevytruck]

NICE TOOL!..... Always use a chain when haning drill on metal......just incase someone unplugs electrical cord or hydro power goes out or off! (yes its happened to me!)

[@robmclaughlin420]

I would love to have a Mag drill

[@kimvoss3479]

Nothing like new toys to play with! If all else fails, read the instructions! Lol!

[@rachelbohnet]

Haha ya, I'll do it when I have to,a

[@mico26az]

What's the retail price ?

[@danielglaus2064]

What did that cost if I may ask

[@rogertaylor8615]

What was the price for it

[@isbcornbinder]

You are beautiful enough. You do not need the silly theatrics. You made my day.

[@kimvoss3479]

Okay, point taken, it is your shop!

[@WilliamEllison]

Your Instagram link is not working in your KZbin "About"

[@rachelbohnet]

Thanks! I'll check it out!

[@DanPeterka-w9f]

Can never have enough tools.

[@RanjitSingh-h8b]

Good work and looking lovely lady ❤️

[@anthonyyanulik7325]

Kool Tool....thx R

[@rachelbohnet]

🤗🤗

[@DannySantellano-kv9up]

Nice tool! Good for you don’t take any nonsense from the naysayers 🙏☮️🇺🇸

[@kevinharrison1997]

To much coffee...😂 that language is not acceptable, at the shop! 😊 That seems to be a quite impressive tool.

[@rachelbohnet]

🤣🤣🤣

[@GerrySoulliere-x2z]

Building your business is going to force you to be more efficient which means upgrading tools. Good Luck,

[@db.mc2]

👍🏻

[@kimvoss3479]

Guards have a purpose! Until you work in a shop where someone gets killed by an exploding grinder blade, then you might think twice about losing the guard!

[@havivmishali9847]

Don't worry about your here you are gorgeous regardless ❤

[@dannymoore5212]

You rock

[@leonardohard9604]

me voy suscribirne porque tenes las manos sucias. es como debe ser cuando se trabaja de verdad.

[@cgindustrial1859]

I just, I, I, I...I don't know how to approach a comment! Lol. I am a welder with a small shop so I have a very deep understanding of your life...but I am a man, lol...am I supposed to only see you as another welder?

[@fausmartinez6342]

Uy que miedo te vez bien sexy con el nuevo taladro

[@hankclingingsmith8707]

Put your drill press on a 4 wheel dolly..buy a shop vac

[@ChrisChandler-y4g]

That ridiculous "guard" belongs in the scrap bin

[@rachelbohnet]

Haha yup

[@Roadglide2020.]

Looking hot today

[@kevinronald4137]

Please tie your hair back. Good report.

[@blastingweevil2968]

there is only 1 downside to mag drill's you need to have a minimum thickness steel for the magnet to hold properly but apart from that they really are fantastic to use.

[@larrycole8030]

😎😎😎🪓🪓🪓, cool tool to have.

[@rachelbohnet]

I love it!!