Magnetic and Dielectric fields of the Bifilar Coil Visualized

[@osamamwenumweni5685]

I have always wanted to understand it but no one has explained it like you do thanks so so much

[@MasterIvo]

Thanks!

[@jetsonwhite888]

In my Tesla research, I discovered that Tesla purposely left key elements out of his patents after realizing they could be used against Humanity.

[@gabrielferrara9111]

for example P?

[@jetsonwhite888]

@@gabrielferrara9111 Coil winding techniques is one. Niko could visualize his inventions in his mind and see how they operated if a certain change or proposed improvement was made. Also, after having so many of his patents literally stolen by unscrupulous 'inventors' like Marconi (who was later found in court to be a patent thief), Niko saw that he would have to keep certain subtleties out of his patents in his head only. This vid of mine tells more: kzbin.info/www/bejne/bHa9nnqJo6mWi5Y

[@danahoecker3308]

Of course I keep adding things to his works

[@limitlessenergy369]

@@jetsonwhite888 #hypersanity

[@scolem2681]

All patent holders leave out key elements

[@robgad2271]

If I may inject a slightly different understanding of my friend Nicola Tesla. In his explanation of the actions of electrons and coils, he sometimes often uses the term capacity and capacitance interchangeable with more general terms we call amperage and voltage impresses, and not distinctly with the modern term of capacitance as in a device we call a capacitor. Often here his meaning in general understanding is simply the activity of the coil has the capacity to increase the flux potential of power, i.e., voltage and or amperage.

[@natetehgreatt]

3D visualization!! Amazing addition Master Ivo 🙏

[@MasterIvo]

Thanks, I love that VR is able to show this

[@brunomarier8872]

I love the way you explain things Master Ivo, you always start from the basic principle and it's very important not to miss any information in passing, to understand the two-wire coil before you tackle the electrical circuits and how to use it. :) You are the best I thank you for all the quality of your work and all the personal time you invest for those who want to discover this unique type of energy.

[@MasterIvo]

thanks Bruno. much appreciated. indeed step by step explaining all the details, for replication

[@alvinhill3838]

I really appreciate your lecture, l went through school in 1970. After my degree, I taught in a local college. I have forgotten most of my education in electronics. I'm still interested in learning more, [ha ha] is good for me. Thank you!

[@foureyedchick]

9:34: Hooking up the red to blue and blue to red is like an electrical Mobius strip! Wow!

[@braaitongs]

This was brilliant! Very well explained. I feel like I understand how the coils work now!

[@originsdecoded3508]

This are principles of step up energy via manipulation of flow and compression of voltage through a series of more friction to produce more resistivity. The mangetic forces should fallow the ideal concept of plutonic symmetrical shapes, and shapes should be made according to the desired directions and interactions of the magnetic fields. The key is all about having the right shape and symmetry to modulate and control energy both in the form of vibration/sound and electricity/voltage. Interestingly enough, none of this science is new about fractal and plutonic shapes and assemytry is energy manipulation. Ancient texts, temples, display such knowledge of cymatics and energy manipulation through shapes and proper elements.

[@iyoutome]

Thanks brother, you make it easy to share with those whom cannot visualize. This would be a great teaching aid. Look forward to you next video. Peace and Cheers!

[@MasterIvo]

Thank you Claudio. VR is a very strong tool for lectures. I wish in the future VR will be more wide used, so I could give a live lecture in VR, and everybody could join in VR (this is already a possibility now!).

[@iyoutome]

@@MasterIvo you are right brother!

[@burneye]

Master Ivo you da man!

[@EgorGrigorievich]

There is such an idea. Instead of a conventional dielectric, use a piezoelectric. Then, when the capacitor is charged, due to the Coulomb forces of attraction, the plates will be attracted to each other and compress the dielectric, which will generate an additional charge due to external pressure. Thanks

[@mikeverwolf3273]

Excellent video. Love your insight and the VR presentation. Thanks for sharing!

[@MasterIvo]

Thanks!

[@FractalWoman]

Nice work. Great VR display.

[@MasterIvo]

Thanks :)

[@cryptonein]

yeah, he did a great job on this didn't he? very pleased to see this being used. the tools definitely could be improved as far as vr modeling options go at the moment.

[@kdkinen]

Amazing. You continue to blow my mind

[@emilianodecatalina2810]

you have simplified what Tesla said in his patent. its a great work. i understand it better.

[@stevewilson8267]

Awesome information you have given us. You are very appreciated. Thank you!

[@MasterIvo]

Thanks Steve, you are also very appreciated, thanks for all your efforts.

[@stevewilson8267]

Wow I appreciate your newest video display skills. Great job sir.

[@BritishBeachcomber]

The Tesla bifilar coil is better understood by stretching it out from a spiral pancake into a cylinder. Then you can see that it is just a centre tapped bifilar coil and behaves like a close-coupled auto-transformer, which would normally have the two windings end-to-end, but in the bifilar version the windings form a double helix, with close coupling, just like the Tesla coil.

[@MasterIvo]

center tapped? nothing is connected there. the 2 windings are series connected, and this makes the voltage difference between the 2 close coupled windings as large as half of the voltage supplied. When resonant, this voltage becomes high, and is able to charge the capacity between its windings. making it able to store very high amounts of energy it its fields. this high voltage field then can be disrupted by introducing impulses (fast voltage changes). this is done by making the coil series resonant (low impedance) and discharging (inductive spikes) a pulsed coil through it. these rapid changes in the high voltage field introduce effects that regular science has never researched. A regular unifilar Tesla coil, driven dual resonant, does not do this.

[@any1alive]

Very interesting idea, higher voltage increacing capacitance,. no wonder he used them to drive the secodnary and terceriary winign of his tesla coils, to allow greater spikes and discharges, vs expensive regular capacitors. especially as the field collapses itd help give the shove to the top of the tesla coil and electron bank, /dome at the top to radiate out

[@TheMcdrewb]

Thank you for explaining the vortex

[@MasterIvo]

:) more to come in the future

[@dkdyker]

Nice explanation Ivo :) I like the way this is going.

[@MasterIvo]

Thanks dkdyker :)

[@patriaamadanews9303]

i from brasil, amazing video, the best.

[@MasterIvo]

obrigado

[@nothingelsetolose7661]

Thank You Master Ivo your teaching method is excellent you made me understand the bifilar coil I get it

[@StarNumbers]

There are references to Walter Russell being a close and a long time friend of Nikola. After getting lost with Walter, I reread some Nikola stuff and ... wow! Much recommend looking at both: Walter AND Nikola. Super vid.

[@MasterIvo]

Interesting. Did he also write about displacement currents, and impulses?

[@StarNumbers]

@@MasterIvo Not sure. Walter has his own terminology such as the "infinite still light," which seems to me to stand for "un-energized ether." Calling it "light" appears awkward until Walter makes his case for the optical nature of all matter. When Ed Leedskalnin steps in with his Magnetic Current booklet he *also* takes the baseline of the optical nature of matter and on top of it claims that the magnetic current consists of *concurrent* positive (N) and negative (S) magnetic streams with vortex shapes. So, it seems to me the radiation from the bi-filer coil geometry *emulates* the magnetic current of Leedskalnin in its most basic form no less.

[@tribulationcoming]

Tesla discovered methods of utilizing the aether and creating longitudinal waves which they themselves [the aether] create a much great potential. The DC pulse of high potential does the work. Very nice graphics. I'll say again what a different world we would live in if Nikola Tesla had been allowed to succeed.

[@John-wd5cb]

6:14 there are still videos of Schawberger's vortex geometry models available on youtube. 13:52 Schawberger used 2 counter rotating copper plates to create the same effect in the middle, I think.

[@bg81973]

It seems that this is a thermopile/condenser in one. Tesla worked a lot with steam and I'm thinking this was probably his way of recycling some of the lost heat energy. By passing steam through one coil and any heat-conducting liquid through the other, and the two being made of different metals, you can pull current out by the process of transferring heat from the steam to the coolant. Or you could probably achieve better results with no coolant at all and just a solid metal drawing the heat off. Copper tubing and aluminum, for example, with two metals shaped to touch with the greatest amount of area, flat bar and tube flattened on one side, for example. And water and steam flow would increase current. I'm not sure if my idea would even work however, as a thermocouple requires a heat differential between two connections. But that may also be the magic of this coil, perhaps he found a way to turn such a connection into a very long thermocouple that produces like a thermopile. Or, perhaps it is a capacitor fed by a special thermocouple. Another possibility is steam through one and the condensed fluid through the other in the opposite direction. Thus the temperature difference as well as opposing fluid directions would generate current and with an electric insulator but heat conducting layer between, build a voltage to be drained off. But I'm just throwing mush to see what sticks for someone else. I don't know enough to speak with authority. It seems to me, a mere capacitor could not be what this is, but since he mentioned replacing a condenser, I'm thinking a thermocouple/capacitor charged by steam since it is also to replace a condenser.

[@northblue8216]

The coil is related to [Tesla's Occult Space Propulsion Technology] and was central to the development of his flying machines that could stand perfectly still in the air, in the middle of a raging storm, and travel pole to pole in 15 minutes. The other book to read is [Pentagon Aliens].

[@MasterIvo]

vdocument.in/occult-ether-physics-by-william-lyne.html?page=3 Ocult ether physics (William Lyne)

[@wbeaty]

Build it and you'll see! The patent is for a novel component, a "Coil-pacitor," a resonant coil with immense capacitance. Boring? Simple? Not exactly. Any Tesla secondary-coil can do the same as this invention. But this one is VERY SMALL. It's a miniaturized version ...low frequency without meters-wide secondary coils. High stored joules, but in a tiny package. A novel discovery. If it also has any weird physics hidden inside, that's a bonus. But that's not needed. The trouble with VLF-band high-power devices is that they're HUGE. Put them under oil, for high megavolts, and they still must be large in order to attain low-freq resonance. How do radio companies do the same? Make the VLF resonators physically small? They add an external HV capacitor, which introduces all sorts of problems, as well as being a large added component. Tesla does it differently: distributing the added capacitor all through the inside of his secondary pancake-coil. (Note that we could build a cylinder-version too.) These are power-processing devices, intended for pulses at high rep-rate, for high average wattage in a very small package. If Tesla was inventing 100HP systems to go inside aircraft, or in vehicles and trains, or even human-carried, then SMALL WEIGHT IS EVERYTHING. (Note that 100HP is roughly 100 kilowatts. Can you build a 100KW tesla coil that's the size of a car engine? This patent shows us how.) On the other hand, this device really needs to be submerged under oil, to attain immense voltage. After all, the first HV end is being placed next to the low-volt terminal, before spiralling back in as the second half of the winding. Build a copper-foil pancake TC, with close-spaced turns, in a small box under Tesla's "boiled linseed oil."

[@MasterIvo]

Very well expressed! Don't forget, when this coil is made series resonant, it can produces immense voltages, which if interrupted by an impulse creates a huge longitudinal wave form. More on that in my next video.

[@cbr1thou]

Sick

[@glaubersouza7750]

Thanks Master Ivo, it's the perfect class room! Thanks Tesla too!👏🏻👏🏻👏🏻👏🏻

[@MasterIvo]

Thanks :)

[@CAPTAINSSBN]

try placing two of these coils about two inches apart and ensure that the produce N to N in the middle. fields will then be crushed with an open space between them filled with uncharged Ether. No use coils plates in the middle area and see what you can get for energy. The flux and Ether start there flows from each side of the dipole outward then back to the opposite side.

[@marcobastidas5384]

Thanks Master Ivo. Please go ahead... nice VR visualization. Waiting for the next class. May God bless you!

[@MasterIvo]

thanks, next video will soon be released.

[@TheFarmacySeedsNetwork]

Excellent explanation!

[@juanmf]

Great insight. what's the resonance frequency if that sorta LC created by the bifilar pancake coil?

[@tomascancelliere4348]

Can you imagine the things Tesla himself could do if he had VR!

[@MasterIvo]

He didn't need VR, his mind could visualize all he needed. Brilliant!

[@HamguyBacon]

or if he had unlimited funding. Tesla was able to visualize objects in 3D space and sometimes couldn't distinguish what was real or his imagination.

[@nickmalone3143]

Remote Viewers did sessions on Tesla and said he was a reincarnated alien scientists

[@Graeme_Lastname]

Very amusing.

[@MS-ef1gy]

Nice start...your ready to roll grasshopper...

[@MasterIvo]

:)

[@joeylawell3590]

i love you man watched one video and subscribed, you explain break it down then expand. wish some of my school teachers would take the time. cheers!

[@MasterIvo]

Thanks Joey. there is still a lifetime to learn and explore.

[@Mimanso]

Really Awesome!

[@7356205]

He did show the coils being used in other patents and what they’re used for.

[@MasterIvo]

bifilar coils in patents? or do you mean the coils in the radiant energy patents, are bifilar (I think so)?

[@pauljacques4157]

The planet earth is also equivalent to a capacitor pole opposite the clouds. Kapanadze's solid state generator extracts electrons from the ground 😊

[@jetsonwhite888]

At the beginning, sounds like magnetic induction. V=BvL? Series resonant. Can't wait.

[@MasterIvo]

it looks like a combination of both dielectric and magnetic induction. both transverse and longitudinal

[@brunomarier8872]

If I understand your explanation correctly, the dielectric energy of the bifilar coil increases with each volt we apply to it Earlier in your video you measure the capacity of your coil at 697 Picofarads and at that moment the measurement is taken while the serial connection is open, this was in order to demonstrate that the coil is a capacitor already without even the closed serial connection. Can't you measure the capacity of the coil if it's in serial connection? If the dielectric energy increases to the square of the potential applied in series connection under any speculation this may be an indication why Tesla explained a way to transport energy that could be sent anywhere on earth with very little loss because the more we increase the input potential, the greater the distance to the square of it. The distance of the dielectric field is very large, much larger than that of Hertz which is limited by the distance. So in summary if we have a quadrafilar coil of the same number of convolutions applying 100 Volt of potential as a bifilar coil with the same characteristics we will have a dielectric energy 2X greater than the bifilar coil . If this is true to increase the energy of the dielectric field we can either increase the size of the coil by having 4 wires instead of 2 or we can simply increase its voltage at its terminals the most economical way is to increase the number of volts however both paths are possible. Thank you Master Ivo

[@kocotube01zacasni85]

But increasing number of windings increases capacitance linearly (increasing "volume" for dielectric field), yet increasing voltage is exponential (increasing "pressure/density" inside dielectric field). If you quadruple number of windings, you only quadruple capacitance, but if you quadruple voltage, capacitance increases 16x. Am I wrong?

[@louisdaniel47]

Très belle video je vais la visionner encore pour bien la comprendre Merci

[@pauldabassplaya]

This is a great explanation of capacitance in an inductor. In Tesla's day, laden jars were unreliable.

[@MasterIvo]

It has another benefit. The magnetic and dielectric field are now in the same space. you can manipulate one by the other with a impulse

[@quantum-entanglementinmagn6728]

Remember this is the combination of a Coil and a Capacitor. it is not together to make it a Dielectric device. This is the illusion of the patent to fool those and go into the wrong direction. The field created in the coil is special, and radiates Torsion fields similar to Viktor Grav. It creates a anti-gravitation field in the metals it is attaches and becomes part of the circuit. The Torsion field is a bubble of timeless lack of gravity zone, hence time is at a stand still the zone. This is the time when Tesla was introducing time travel into his world of scientist up to the Philadelphia experiment in the 1930's that initially fail, but then was corrected and lead to the Montauk experiment interconnected in 1980's and the looking glass project of time viewing. So please be aware of why he did not include this in the patent as it is military info at the time. good luck and do your research to have all the info at hand when you do a video.

[@MasterIvo]

I see a different truth.

[@tommydodson7221]

Try a trifilar coil connecting the outside coils and measuring the inner coil. This should give a power change .

[@mroygl]

At 13:05 the capacitance of the wire itself is 679pF but earlier at 08:33 the coil was connected serially to itself thus its plates are connected I can clearly see them connected at 13:25 so the stored energy must be different.

[@RODOLFO.M.S]

🇧🇷 Friend, admirable your work in this video, thank you very much for your excellent explanation. 🙏🏼 Note: I remembered the Joules thief, it would be possible a video of you explaining this circuit, Joules thief and see what you could have in common with Tesla's bifilar coil.👍

[@MasterIvo]

joule thief works great with bifilar coil. maybe I'll show a pnp version with negative spikes

[@surferdudemi]

The 1/2V at 12:00 on the capacitor symbol should be V. As labelled on the spiral version, the open connection on the blue is at potential V. Half way between the red and blue plates it should be 1/2V as shown on the spirals.

[@MasterIvo]

1/2V is correct, half way between bleu and red. coil endings are V and 0

[@yornsnaturalhealthspeciali6785]

good job

[@MasterIvo]

thanks

[@Hossein_Ash]

very well explained. thank you

[@MasterIvo]

Thanks!

[@Emprivan]

I'd say Earth ground connected on one side, big HARRP like antenna on the other, steel, maybe graphite plates on both sides of the coil connected to maybe an adjustable oscillator of some sort to light a bulb or power something.

[@electrocultureYannickVD]

Thank you, very interesting and well explained

[@MasterIvo]

Thanks :)

[@mundymorningreport3137]

Very cool... but the phase of the dielectric and magnetic as they change... and how external fields interact is where the real magic is... can you animate the 3D? For example, as using this as an electromagnet in a motor, a changing magnetic field does not produce the standard Lenz law effect. And as changing electric current flows through the flux-capacitor, it acts as a series LC circuit with the C dominating with it dumping first into the wire, then the current flowing and producing the magnetic field... which sustains the C... net effect, resistance... with the potential for resonance, or negative resistance... Or do I have this wrong?

[@MasterIvo]

I wouldn't say your wrong, but we have different perspectives

[@danielfoster2788]

Thanks!

[@danielfoster2788]

Please thank you Master Ivo. Not only are you a great inspiration you are doing this open source and it’s explained very well and it’s o real. More funding will follow as I am being better funded.

[@thomasknight-wagener6630]

All I can see is a giant one of these with some insane voltage cranking out a Di-electric field with some type of advanced manipulator and harnessing device

[@TheOne-xp4vt]

If you only knew what thay coil was for. Think of a wonderfully way to make things have order by thier design.

[@MasterIvo]

I know :D

[@tchippat7634]

You are a great teacher can you please explain remote control technology in simple words. ???

[@abdelkotb4688]

Very good videos

[@1TylerM]

Is there a "tuning" aspect to optimizing these coils based on the wavelength as well?

[@MasterIvo]

yes harmonic ratios are preferred

[@ralph72462]

Wow! You explained it all very nicely. Great video.

[@MasterIvo]

thanks

[@en2oh]

Great video! Two questions. 1) what impact does the insulation of the wire play in terms of capacitance (and so, energy) and 2) at what point does the energy overcome the insulation of the bifilar coils? Does it lead to arcing?

[@MasterIvo]

the pvc acts as the dielectric material of the capacitor, it's dielectric constant will influence the capacity. I dont know the exact dielectric breaktown voltage of pvc, but you can look it up. over the threshold it will arc over and destroy the pvc

[@makeitreality457]

I think the coil should be made big, with many turns, using flat strips of aluminum, like a capacitor. Or ideally, a superconductor. Many turns will increase the voltage between the bifilar windings. If the coil is designed so that the resonant frequency is the same as its equivalent L/C circuit, it will maximize the voltage, current, and thus the resonant-energy storage. What good is resonant energy? It produces power for the required time to maximize longitudinal impulse.

[@MasterIvo]

I would prefer flat silver strips. resonant power can be used for anything, if the capacitor and voltage are big enough

[@kolinevans9127]

1 Ivo , I want to write to you today, and I want I’ll make sure you get to see it Do you own a compass? Get a a sheet of paper or your favorite book And in it with any means draw one circle ⭕️ then draw another circle outside it same center two circles Now in imagination you have created a wheel the space between the inner circle and the outer circle is the mass , we are going to imagine that it has a considerable mass. Now on your circle draw lines from N S E W so you are making a cross right across your wheel north south east west. Now {WWII footage} we make sure to extend your cross lines to the outer circle at least, so now in one direction find the half way point between the two circles on your mass and draw a line 90 degrees from the line on the right upwards now do that for all the cross segments, I think you’ll find it looks like an old symbol. Now , to be clear you have a cross on your circle with lines from each section of your mass at a 90 deg vector all in the same direction, this is because your mass is spinning in this direction. Those lines that extend are the ‘angular force’ if you like and the rotating causes the mass to be under inertia. It’s not the end of the story Ivo , now you need to draw another force, I think you know what it is, it’s the tractor force now on your cross, draw arrows going back in from the 90 lines on the cross lines so this force pulls back into the center. You can draw arrows outwards on your angular force lines Now at a certain rotating frequency, that tractor force {pulling } will match the angular force {expansion } and ‘magik’ will happen because the two alternate unrelated vector forces will act to offset the mass of the wheel under inertia to the 3D plain. Now I’m writing to you from the 3D plain but the mass is not here , you have a ‘massless’ {to degrees} wheel spinning.

[@savetheplanet8450]

True internal power of Capacitor in short -we could discharge capacitor inward instead of outward, and inward voltage is higher then outward, by a lot. When tiny wire ascend to plane between "+" and "-" plates of capacitor, its concentration of charge would increase(therefore voltage on them). And when charge reaching midst plane between "+" and "-" it could effortlessly leave capacitor through (within) its plane (because distance to "+" and "-" equal in this plane) ====== What if charge on capacitor plates could leave capacitor effortless and unleash its true power. Which usually foreshadowed by nearby opposite charge (push mines pull(outward force)) But inward force dont foreshadowed and have all of its true tremendous strength(as if its solitary charge) And its strength isn't a joke , at all! If we could remain it intact and go outside with it it would be a great output power(output voltage), could we? And we do have such a place for charge on a way inward(from capacitor plate) , or better to say such a plane And it right amidst "+" and "-" plates. Charge could move within this plane effortless (because distance to "+" and "-" is equal for any point in this plane) So charge could maintain all of its true power and leave capacitor within(through) mid-plane (as far of capacitor as it want) Its mean we might obtain great power then Because we pull in low voltage and it push out high voltage (with the same quantity of charge) How it might be done :) Just tiny wire which descend from "+" or "-" to midst (between them) and wend aside through mid-plane through with all true voltage. Concentration of charge when it reached amidst would be great , meanwhile there no force to hinder it within mid-plane:) Therefore we may see that voltage actually rise in a way inward and lowered in the way outward Its just mind-blowing (really unexpectedly) ===== 2) ===== HOW MIGHT WE OBTAIN ENERGY from SURROUNDING TEMPERAUTRE MAY WE? Might we built thermal motor with 100% efficiency? This model SAID yes , how? Read below and enjoy the journej (and therefore have possibility to obtain energy from the surroundings without consuming some fuel though in theory) (let it be in the vacuum ) Shocking but fact - this motors already convert 100% heat energy into pover BUT!!! (how it might be without it) in the First Stage when it expand to the point where temperature equal environment temperature (simple machine which consist of piston , cylinder, gas inside it) In the Second stage we should compress volum emiting heat to the environment with the same temperature what environment has and therefore waste energy (even nothing to contain thermodynamic allows us contain overheat without effort but in this case we dont have overheat) So if we can avoid second stage we can save efficiency(and it might remain 100%) And solution how to avoid waste power of compressing gas is... :) Dont use GAS ! we might USE LIQUID heated to the boiling temperature (boiling temperature depends on pressure on piston, let it be atmosphere pressure 1 Bar/100 kPa) So we boil water, expand volume with 1BAR pressure, supply heat 212 F/ 100 C in the process, then we store remain warm(overheat if compare it to the environment temperature) And - without effort return piston to the start position(thats it, all what for all of it, this key component, we got it) In the next stage we return stored warm into system and supply additional heat intto the system And repeat it again and again never emit any heat to the surroundings All warm eventually would become power. We heated water, we get what we want(power) we store remain overheat to the storage with 0 effort in order to use it in the next stage, and repeat we use heat in storage , then supply additional heat and repeat it again and again without waste of energy therefore all warm energy will become power even though not at once (thi is idea) if we talking about water , temperature of boiling water is 212 F/100 C Coefficient of efficiency may be something around 4 (0.25 points input power to obtain 1 point warm energy) And all iof it as we could see , might be converted to power another words input 1, output 4 , difference would obtained from surroundings warm (another words it may be little bit colder if then) === 3 === And let's see another one oportunity What if magnet field(force what affect the straight section of wire per miter(not coil)) might be almost constant, as weight force per kilogram near earth surface. So to obtain interaction similar to straight section of current we should stretch opposit current away from us. (we dont deal with this bullish... North and Sourth mythicale poles, its just interaction between parallel currents in plain) If source of force far enough and its force enough powerful we may obtain almost constant force per 1 weight/current/charge But what means dB =0, it literally mean that opposite Voltage U=dB/dt = 0 as well, But its only concerns motor without magnet in this case because F*L still the same and we don't elaborate some method to turn off magnetic domains yet :) Additionally if that "far away current" wasn't a permanent magnet rotation of our motor stil would be induce some very tiny Voltage, which means it should require Voltage for insane amount of current. But luckily we may use permanent magnets. ------- Another similar model is model which consist of battery, resistance (R=1) and electric transformator but not like letter O but like I , lust straight piece of ferrite. Type of signals "quadrupol" U =1 I(current) =1 So we have battery 10 volts, 10 amps, consequently attached resistor and transformator But transformation would be afeccted by the current, thats why we were include cylindric magnet around transformator to compensate 10 amps current. ----------- So without input supply input power to the trunsformator we have 10 Amps 10 Volts = 100 watt When we turn on transformator input will be then 11 amps 10 volt from battery, and 1 amps 1 volts from transformator = 110+1=111 Output heat power in resistor 11 volts, 11 Amps =121 watt 121 >111 , we get 10 wats more BUT! lets see what would happen when we replace permanent magnet to coil wit 10 Amps, 0 Volts We should maintain current when transformator turn on , and therefore our Voltage will be 10 Volts. HERE IT IS -this 10 wats waste Therefore we see that permanent magnet could gain power into system by just remaining CURRENT the same Nowhere saw describe like this, though idea quiat simple It might be good if in the world be more pure minded volition people

[@marsangeles6210]

How to connect the capbank sir or capasitor bank sir any idea...

[@savetheplanet8450]

@@marsangeles6210 check out my videos , my ideas was illustrated there (as for well known circuits to accommodate it , it is plenty of literature out there , main thing here to have extra power if its present manage it not a difficult task , just little bit to ellaborate, Principles of such devices extremely rarely to be seen anywhere)

[@MasterIvo]

all caps are parallel, with switches in series to each cap

[@yoshimitsu380]

Excellent information.

[@MasterIvo]

Thanks :)

[@klehny1]

Молодец,почти разгадал!

[@MasterIvo]

google translate: Well done, almost figured it out! Спасибо! Да, почти. Есть советы?

[@crazyham]

Master. I know this is an old video yet a very good video ⚡🙏⚡ I wonder what your thoughts are regarding the Rodin Coils? Although Marco Rodin Employs Tesla's Vortex Math I am extremely sceptical as he never mentions an associated frequency nor Inductance.

[@MasterIvo]

I'm not interested in the Rodin coils. They can produce a focused field but for what use?

[@crazyham]

@@MasterIvo Thanks mate 👌 I can't yet see what use it could be. Thnx for your reply & keep up the great work 🙏

[@TheFarmacySeedsNetwork]

Excellent information. well explained.. "following"

[@MasterIvo]

Thanks :)

[@raloed.363]

Ok so why has any one built an actual capacitor inductor? Take two flat conductors and rap them around a pipe so that they never shorts out each other or rap around themselves. That is, take two sheets of foil paper of about 10m in length. Use plastic rap to insulate both sides of both sheets and then put the two sheets together like a capacitor. Then rap the sheets around 1 inch diameter pipe while leaving a connection for the start and end of each sheet like any normal inductor. then put a ferrite core in the pipe and see how well that works as an inductor. Use oil to "paste" the plastic rap to the sheets. The oil should also act as a good insulator to help with preventing arcing

[@MasterIvo]

I actually did something similar to that once, with aluminum foil and polypropylene foil (house bold foil). Oil is indeed a good idea! Even better would be to use a vacuum pump to get all the air out of the oil.

[@raloed.363]

@@MasterIvo so what was the results. Did you notice any significant effects on the dielectric fields?

[@MasterIvo]

I only used foil, and it had much air. It did resonate but quickly sparked over. It wasn't very successful. I've learned to make a bifilar coil from speaker wire that is much easier to build and I'm getting good results now. the impulses amplify the current.

[@raloed.363]

@@MasterIvo ok I guess I'll have to try it myself one day. I have a question for you. We know that the right hand rule tells the direction of magnetic field lines for conductor carrying current. So let's say switch is on and current rising in inductor. We use the right hand rule to determine the direction of field lines. When the switch is turned off and the current starts to fall..DO THE MAGNETIC FIELD LINES SWITCH DIRECTION? I ask because if you approach one side, say North of a magnet to a coil, the coil induced field lines oppose the North. But if you move the same North side away from the coil then the coil field lines flip in attempt to attract the magnet. Also you should realy look into the bidini

[@MasterIvo]

I looked into bedini. nothing there for me. the magnetic field lines are opened up, and thus are transformed into dielectric field lines. this happens at the resonant frequency of the coil.

[@qix6424]

Would a spherical coil work? Or do they have to be disc like?

[@julienmina7276]

Excellent _

[@tobyearth]

This is currently my favorite channel on KZbin. Absolutely fantastic work, Ivo. We would love to have you chat with us, at one of our @aethercosmology round tables, if you would have any interest in sharing your work with a group of aether nerds and flat earthers.

[@bringer-of-change]

I agree. His channel is my favorite as far as electrical experiments go. I have some ideas for inventions and the information he is sharing is a huge inspiration for that.

[@jesusischrist1527]

At first I couldnt wrap my head around this concept but now its perfectly clear as to what is happening here and hoa to benefit from it ... What is happening is there is a compounding current within the set of coils which is holding and increasing the current in one while the other is a constant ... Secondly the constant line is boosted from the electromagnetic induction coil ran in series .... Lets just say for example that 1v is ran through the (A) constant line and due to the compounding composition value of the second coil (B) , the output of the two coils would be a slightly higher than just the one single coil but the voltage increase by the second coil (B) is not worth the space consumed by the second coil (B) rather than simply having another coil but seeing how it also acts as a capacitor it may be worth it after all .... Now this is all if I understand correctly ... So I guess my question is , is it worth it ?

[@jesusischrist1527]

Second set of questions : if the bifilar coil emits a stronger volt but in pulses , could this be an alternative to the ac current in the way that it will be producing a pulsing current instead of a direct solid state current minus the currents return ? Let's say we have a 120v dc current with pulses but still no return , would it be able to power an ac device in the way that the pulses may act as a hertz ? Would the sine wave would be changed from a solid state DC current to a pulsed dc current except without the return ? Im not sure I'm asking this correctly ...

[@robertjames1259]

Thanks so much you’re priceless Will donate to great cause So enlightening Tesla be proud of you and work God and I love you RJFK

[@MasterIvo]

thanks, a day ago, I tested a new circuit. double impulsed series resonant primary. Worked long to get this right. testing needs to be done.

[@KaliFissure]

The way I see it the whole purpose of bifilar is so that the two directions of magnetic field cancel out. It is a coil with no inductance. Which stil radiates a field but since it has no inductance one can use higher frequencies without internal back emf fighting you

[@MasterIvo]

yes you can do that, but it will still give back emf, as a very high voltage super fast voltage impulse, when opening the switch (if you use pulsed power Like I do). But I don't use counter rotating windings.

[@MadScientist267]

​@@MasterIvoA *correctly* wound bifilar coil, there's no back emf

[@MasterIvo]

@@MadScientist267 correctly? meaning a counterwound, with no magnetic field? in a perfect world indeed it would not produce an impulse. but in reality it does. a very fast high voltage impulse. I tried and built it, it is in one of my older videos.

[@MadScientist267]

@@MasterIvo The technique is used in delay line explicitly because this doesn't happen. Just for one example. But it takes careful attention to detail.

[@MasterIvo]

fascinating, so it truly has zero inductance@@MadScientist267

[@deangermeten5629]

Great video but the magnetic field depicted as a vortex is incorrect but a very flattened torus.

[@purrezaudio7075]

Actually your are wrong - using ferrofluid viewers it is proven they are not flat

[@dz28396]

thanks Ivo

[@MasterIvo]

Thanks Stanis :)

[@jonwuan4349]

What about a bifilar toroid construction? Definitely more difficult, but perhaps more effective.

[@MasterIvo]

Yes, it's possible. but it could have some implications. as the inside is constricted (when you start working with impulses). Could be interesting

[@ihtsarl9115]

V Good Video thanks for posting

[@369Eletricidade]

Estou postando uma serie de vídeos onde faço varias experiencias com a bobina bifilar plana de Nikola Tesla, patente 512340 nestes vídeos falo sobre as características da bobina de forma simples e direta numa linguagem de fácil entendimento, tenho muitos experimentos e vou postar no canal para que outros possam acompanhar, entender o potencial desta tecnologia e também possam fazer... Algumas das coisas que você posta aqui estou replicando de forma simples, te agradeço pelo trabalho maravilhoso que faz, brigado Ivo...

[@teesm1th734]

Check out theoria apophia, I think that's how it's spelled. He uses a phero fluid mixture in combination with LEDs to show the field at work.

[@MasterIvo]

thanks, yes I know Ken Wheeler.

[@easyerthanyouthink]

Did you look at the book secret life of magnets. By Howard Johnson It describes and shows the actual vortex. My understanding is the filings are actual perpendicular to the vortex. I could be wrong. But there are left and right vortex at each pol

[@chrisrosenkreuz23]

that looks exactly like a treble cleft in musical notation

[@yuotwob3091]

Amazing, right off the bat, I have just been considering superconductor Josephson junction energy transfer (to a normal conductor and Gauss meter) and wondering how this might be accomplished via an insulating junction, lots of ideas. Incredibly synchronous is that first Tesla quote about dispensing with the condenser. I shall carry on listening... :)

[@yuotwob3091]

(a 'warp coil' which exploits 'neg-entropy' inside the coil to saturate a voltage drop (field blue-shift) of the coil by the return path through the centre, making the 'diode' an oscillating voltage source.)

[@scottneels2628]

@@yuotwob3091 Can you please explain this answer a bit more. I kinda understand but only kinda.

[@yuotwob3091]

@@scottneels2628 a region inside a coil is a pure vector potential (cosmic). rather than the vector being the classical curvelinear orbits of the planet, galaxy etc, it is a 'zoom vector' which relates to a picture of cosmic expansion as shrinking galaxies and to an 'infrazoom' potential with a 'lamda'value. does that make more or less sense? just mime really...

[@yuotwob3091]

@@scottneels2628 a changing pangalactic landscape, redshifting of the interzones manifesting preexisting systems from the spacetime medium. cross sectional flux tube galaxy imposters, hawking points and penrose blotters.... whiting out in a stick of planck chalk and arriving on a membrane

[@JenkoRun]

What effect would this have in a generator? As in if the coils of the stator or rotor were Bifilar like this?

[@michelbisson6645]

But capacitor has a dialectic layer so does it imply the plastic of the wire make dielectric equivalent?

[@MasterIvo]

yes!

[@MichaelZP1]

​@Master Ivo in 14:48 please correct, as I understand, it is always half of the exponential increased in dielectric energy as in equation E=0.5*C*V^2 so: 100^2 /2 = 10 000 /2 = 5 000; 200^2 /2= 40 000 /2 = 20 000 so the statement is correct we get four times more but the calculation is not fully correct related

[@MasterIvo]

Yes but it is to show the concept that its not linear in increase.

[@JanMartinusSlootmaker]

Dankjewel ivo

[@MasterIvo]

graag gedaan Jan

[@thebiomatrix]

Great way of viewing the relationships. Have tried animating them, as all is on the move. Did Tesla try a Mobius like relationship? The system are elliptical, through a directional bias.

[@MasterIvo]

I dont know if Telsa tried a Mobius configuration

[@antoninperbosc1532]

moebuis ribon is unilater object (mean is topology got only one face) so it's mean it's a pure resistive object without inductive this good to replace expensive non inductive resistor whend you must avoid inducting perturbation inorder to measure.

[@gnarcassis8775]

Hey Master Ivo I've been learning electronics for the past few months and you're videos are awesome for that. I was wondering the other day, could the dielectric force actually be an absence of electromagnetic force? Like creating a vacuum or void that is no longer holding the emf back and so it rushes in. Kind of like if you dip a dry cloth in water, the voids will become saturated through capillary action.

[@gnarcassis8775]

Or like a siphon. When the water particles move from one spot to another it creates a gap that has to be filled with something in order for it to overcome the pressures keeping it static. Its a closed system at that point within the tube and cannot pull anything from the space around the tube. So, in order for it to move it necessarily has to have something come in and fill the gap that was just left. Or vise versa, if something in the back wants to move forward then the thing in front has to get out of the way.

[@bishnupd.parajuli1564]

Very nice video

[@waltergonzalez5405]

This is incorrect. Tesla put both coils in the same plane. The electric field is supposed to be perpendicular to the magnetic field. You use speaker wire. Therefore your two coils are parallel to each other, but now the electric field between coils is parralel to the magnetic field, instead of being perpendicular. In Tesla's version the electric field of each loop is additive. In yours, they can't. You're not making a Tesla bifiler coil right.

[@MasterIvo]

If you read his patent, 512340 you will read it applies to all kinds of coils even solenoids. There is a reason for using pancake coils, they work best for longitudinal transmission, and as capacitor plates.

[@waltergonzalez5405]

@@MasterIvo my point is that you actually make two pancakes parallel to each other. The speaker wire is side by side. The potential difference is parallel to the axis. In Tesla's patent, the two coils are in the same plane. The potential difference is always radial

[@MasterIvo]

@@waltergonzalez5405 I understand. Many have shared the same insight. But you are only talking about the image in the patent. Have you read the text?

[@waltergonzalez5405]

@@MasterIvo when patents are filed, they are made broad to avoid people getting a patent on a variation. Otherwise, you could patent yours, which is two Figure 1 coils next to each other. The reason I say you need to make the coil the other way. Is that they way you have it, it might be emitting em waves with an angular distribution that is stronger radially (given the electric field is parallel to the axis). It would diminish as 1/r. But if the electric field was radial, you might get a greater intensity off the face of the pancake. And Tesla claimed he was able to transmit energy with out it diminishing.

[@rapture9125]

I'm not a scientist and my field is woodwork. I am though, trying to understand the fundementals of electricity, including coils. I appreciate that you made a comment on this video because for me as a beginner, I need to know what is and what isn't. Thank you. @ Master ivo, this is not to take away from your work either. I just need to know.

[@ricardomolina8773]

That pattern was for a lamp stand

[@danieldewindt3919]

Cool video. Nice explanation. What is the 3D program you are using? Looks nice

[@MasterIvo]

Tilt brush, on the Oculus Quest

[@DANTHETUBEMAN]

just when I thought tela did not have capacitors,,, coil caps. how can we use them today?

[@MasterIvo]

see my april 2019 "radiant power" video for that

[@mariusionita9129]

Hi, I will tell you something very interesting that results only from the practical work. This maximizes the effects of the N Tela two-wire coil. If for the construction of the coil you use multi-wire cable connects each wire separately from the other wire of the other cable. For this purpose use a multi-wire connector (ratchet). In this way each wire in the cable will behave like a two-wire coil. Basically in a flat coil you will have as many coils as there are wires in a cable. Tell me the differences observed. Good luck!

[@MasterIvo]

thanks for sharing

[@flyingsaucers5094]

it's coil and capacitor in one frame.

[@MasterIvo]

exactly. in one space, in one and the same volume of Aether

[@tetraederzufrequenz7896]

@@MasterIvo very interesting. How can we create an electrostatic field using a pancake coil? I refer about a circuit. Thank you for your help.

[@MasterIvo]

@@tetraederzufrequenz7896 ElectroSTATIC, is easy, just put DC on a bifilar coil, and between the windings there is a electro static build up. ElectroDynamic, would be making it resonant, this is shown in my april 2019 radiant power circuit. Magneto dielectric is the most fun of all.

[@tetraederzufrequenz7896]

@@MasterIvo thank you. You are great.