How to induce electricity

[@MasterIvo]

I was so close but still needed to learn so much. Indeed both forms of induction are needed. the dielectric induction works like a capacitor, so the coils act as capacitor plates. whereby close coupling is needed. And most important, the 2 forms of induction need to be IN Phase power= voltage x current (in phase) voltage is induced by changing current (magnetic induction, we all know) current is induced by changing voltage (capacitive induction, not much talked about) Both 2 forms of induction can be done simultaneously in a single coil. So you need 3 coils all close coupled. middle one is having a resistive load. the capacitive coupled one is a high voltage tesla coil. (coils act as capacitor plates, current is induced in load) the third coil on the other side of the load is a high current coil. so, only a few windings of thick wire. with a big parallel capacitor. the coils are push pull driven at the same frequency, and thus must be both tuned to the same frequency. to get them in phase the tesla coil pulse is delayed. kW of power

[@sheester21]

You are such an amazing teacher! The universe truly appreciates your efforts. Your path will reward you well my friend. I am so grateful for your patience in explaining concepts to me. You truly are appreciated my friend. I would love to hear your understanding of how the universe works aswell someday. It truly is my pleasure to be learning from such a great educator!

[@MasterIvo]

Thanks Shawn. there is still so much to learn and teach.

[@svenyoda1309]

@@MasterIvo I am new here and I am very interested in the opportunity for learning more about your expertise. I have a Tesla coil with bifilaire tubes 22mm diamètre, 11meters each coil. First coil 35cm above ground and other coil 9,2meters up in the air connected with 14mm wires pure copper and spark gap between them. This is mounted in my backyard with a purpes of producing 4200v but still waiting for a big amount of money to get it finished. My point is energie is free but the materials are extremely expensive so I have lots of respect for you guys. So this is me, im also a teacher at High school for adults my question to you is what is your goal to achieve at the end? Tim traveler's? Im verry intrested in your expectations of your life. Annyway thanks a lot for the opportunity and effort that you provide for us. God bless you good luck. May the force be with you!!!

[@MasterIvo]

@@svenyoda1309 I want a deep insight into the way electricity works, so we can produce it.

[@svenyoda1309]

@@MasterIvo Thanks for the update and I hope you will proceed with this process to get the best results from energy it is important to you as well for the community. I have the same interests and love to learning about your videos. Good luck my friend!!

[@MasterIvo]

@@svenyoda1309 Thanks! yes I will continue till it works

[@drzigzag8985]

Hi Lvo, why not use 3-D to do a simulation of the ring toroid for vortex I believe it could accomplish in Blender open source a free 3D Application

[@MasterIvo]

because I need the real deal not a simulation.

[@eclipse-ke3il]

Hey @Ivo , not sure if you already know the answer or were genuinely asking how this occurs in nature. This occurs in nature all the time. The L4 and L5 are clouds and L1 and L2 are the earth. One is positive and one is negative and there are dual inversely polarised dielectric fields between the two. (this is why you sometimes see lightning from the clouds to the ground or ground to the clouds or from ground and clouds to each other and meet in the middle (lots of videos pics on this captured with high speed cameras.)) Since yours will be equal voltage on both sides, you'll get the meet in the middle effect. Basically you're making a spark gap and you're putting the L3 coil in the middle. I think it's an interesting test, but make sure you prepare for the lightning.... meaning the spark that could appear between your top and bottom coil set eating through the plastic insulation on your coils. The gap between the L4/L5 and the L1/L2 seems far enough away that the spark cannot happen at the impulse voltages you're using, but with the L3 in the middle.... that may allow the sparks to fly...stand back when you fire it up...and make sure you have a way to turn it off easily from a distance. Good Luck and make sure to film it on all the tests... If you cook it, you'll want that video footage, and won't want to repeat it a second time to catch that moment on video :D

[@mykedoes4099]

4:45 that is called a double tetra hedron, looks like two ice cream cones put together. "Ralph Ring" based his research on this sacred geometry , when viewed (Double tetra hedron) at different angles it creates all the shapes in the shape book. It was chosen for this reason in his (Ralph Ring) research with Ottis T. Carr, whom worked with Tesla..

[@ahmetozkamal8198]

kzbin.info/www/bejne/e4fFlZWMnd-Wg5Y ı think he talks about this

[@Vikiyz]

Hey MasterIvo I have found a video on youtube by the channel smartereveryday called two vortex rings colliding. It shows that once the two rings collide, new rings are produced orthogonal to the circumference of the orginals.

[@GeneralThargor]

I was going to point him a the same video too, it's an incredible video and I love seeing the guy's (dastin?) reaction.

[@Tomtech29]

Ivo. quite an interesting experiment I would like to see how did you solve the synchronization of both signals ? -whether they come from one source? (flip flop generator) or two independent generator sources? - or did you use some PLL system? -what you control overlapping time? a few years ago I was trying to develop a system to reconcile both the signal in the ruda under load the impedance changes question what happens with the output signal of the L3 coil under load?

[@ScientificLee]

so if we use two pancakes we get en electrical sheet in between?...this could be the same as the sun as I have said the n and s are separated by the inertial plane...so there are two torus'...one above and below and so the energy resonates within what ever is between the two pancakes...planets etc Does that sound plausible for our solar system dynamics?

[@AusWorkshop]

Love this and all your videos are fantastic, thank you. Have you ever thought about having two grounds? One for the main circuit and first coil. Then on L3 you have that ground connect to a copper pipe driven deep into the ground as a 'lower' negative for that emf impulse to jump up from? If that makes sense. Increase the peak to peak as much as possible on that back EMF including any negative spikes normally dispated through a diode. Then try and feed that lower ground impulse back into the original circuit ground and tap into the difference by boosting through another isolated coil. It may open up another dimension or wormhole so be warned! 🙂

[@nazgullinux6601]

The magnetic field IS the dielectric field in motion. They are not separate entities.

[@chrisrosenkreuz23]

@Jane Christensen lol

[@josephpalaca3675]

So I have only watched one video but I know I will be spending a lot of time with you. My name is Joey. Your video was explained very well. I am no electrician by any stretch but. I did not have a hard time following your video as you explained it very well and I hope you continue the same way. People are so vague in videos it makes them useless. Not that people or myself can not read or research but the whole reason to watch a video is to have the visual aid along with explained process. And assumed outcome if possible. Which you did very well. I am broke now but a donation your direction is coming as soon as I can . But well done tand thank you i have some questions. I will spare you for now and watch for more answers I no doubt will find in videos. Thank you again 🙏

[@iEnergySupply]

I would like to make this happen with Tesla turbine rotors if my idea works, open air rotors without casin. I have had this thought before and I want to build it. Only problem is the shafts get in the way and disturbs the vortex pathway. I am trying to find a way to get around it.

[@MasterIvo]

that's why I work solid state. so the Aether can do its thing.

[@iEnergySupply]

@@MasterIvo I am glad you are doing it, I have learned so much from you.

[@Buzzhumma]

i was recently looking at environmental effects on the Stirling engine and it got me thinking about environmental conditions for both electric fields and dielectric fields and whether you anticipate efficiency gains? for instance mercury gas may have effects on magnetic flux but also i wonder what can assist in dielectric fields?

[@jamest.5001]

I have always thought there could be effects caused by things we use every day, that we do not see, and there could be things like this happening in reverse, So why couldn't something so simple 'kind of ' lead to something revolutionary? Why couldn't there be a way to tap in to the energy that heats the universe above absolute zero, or the energy holding atoms together, or all the other forms of energy out there, where do you connect to use this energy? Where do you push, where do you throw the anchor? For all we know there is soo much we don't!

[@undernetjack]

If you build a capacitor, then remove plate A and replace it with a new plate. The charge will still be there. Then if you replace plate B with a new plate, the charge remains. The only thing that has not been changed is the dielectric. This bugs me for some reason. What if there was a a coil on one side of the capacitor that felt the charge from the capacitor. Then if you remove the plate, would the charge be felt in the coil, as well as the dielectric? What if the coils or plates were switched infinitely fast, while the charge was still present on both the current and previous coils/plates. Could we then 'steal the charge' over and over again? I hope I have explained the situation I envision adequately.

[@christopherthumm4046]

I am a longtime subscriber and fellow experimenter . i knoticed that when i set a bifiler coil on my flikering light flickering because my electric heater was on . That the flickering stopped and my breaker wont pop . pretty cool !

[@MasterIvo]

a true magical coil

[@offgridjohn871]

Cheers from Australia.. 👍

[@_zproxy]

have you reviewed the latest from david lapoint, the cone focused magnets?

[@MasterIvo]

no I haven't seen it yet. I'll look it up. thanks for the tip

[@_zproxy]

try to build one and make a vid.

[@caimaster6409]

thank master ivo ,I am looking forward to your new video, I have been waiting for a month !

[@Buzzhumma]

Hey there Ivo, i was thinking about if there could be a kind of inertia in the system ? A kind of motion that stays in motion that could be tapped if there were periodic false pulses and if they could be implemented with out any noticable change at such high frequency ?

[@MasterIvo]

yes the volumes of Aethet that ar set in to (longitudinal) motion ARE inertia. I can speculate further. but first I need experimental proof.

[@Buzzhumma]

@@MasterIvo yeah i can see this getting very interesting especially when you incorpoate ion thruster theory!

[@MasterIvo]

@@Buzzhumma keep in mind, "ion" is a polarised aether field

[@banyanstudio]

I am super grateful for your generosity in sharing all of your knowledge and discoveries. Happy holidays and have a wonderful new year!

[@MasterIvo]

Thanks Miguel, for being here and appreciate what I share. Happy holidays for you too and a fantastic 2020

[@acimbobby]

I would say there is one man that can help with looking/viewing your twin vortex research. Theoria Apophasis. I think you are really moving forward. He is a genius at this kind of magnetic tech.

[@MassUX]

Indeed

[@Buzzhumma]

Would be interesting to see any effect with coil in a vaccum bag or under pressure !

[@MasterIvo]

I would suggest to put the coils in an oil (high dielectric K) bath for best results. Dont use conductors around the coils.

[@dianathompson7597]

Does the ring vortex cut through the air because the inside is going forward with less area then the outside going forward.

[@MasterIvo]

than the outside is going backwards?

[@doespindle7934]

Hi Ivo, I made three pancake coils and put them one on top of the other, then I connected the top and the bottom ones to a "Joule thief" type of circuit and made it to resonate. Then took the energy out of pancake coil in the center. The power so generated was very much inferior to the energy provided. About 1/5. Is that all I can get? What do you suggest to improve the efficiency?

[@MasterIvo]

use one joule thief, that works with a pnp transistor, producing negative impulses, so you have both polarities

[@fxphenix5162]

As always, a great video, teasing us with your bifilar coil circuit design with amazing possibilities... I will be a donator as soon as I can get my own life in order.. in addition to being just a strong supporter... Im working on my own Aspects of Nikola Tesla's inventions and mymown modifications of them... as well as my own designs... I watch your progress closely... as much as incan understsnd anyway... I do need to hit the books 📚 more for my knowledge of Electromagnetism and physics, but i always learn a bit of something new when i watch your videos. 😁 👍 😁

[@MasterIvo]

Love to see your research!

[@mykedoes4099]

Ivo what is your best desription for the dialectric field, I describe the Magnetic field as frequency including light. The dialectric I view it as the silent space between two pulses, and the magnetic is the actual pulse. If you have two pulses you have a space in between those two pulses, and it is silent , or is it??? Maybe the silent space is actually the dialectric.

[@MasterIvo]

polarised Aether (a collection of faraday tubes, terminated on two conductors)

[@yuotwob3091]

@@MasterIvo an exploded diagram

[@mykedoes4099]

@@MasterIvo Makes sense, a very mechanical explanation. But the Tubes are only reacting to the dialectric field as recievers/Transmitters located inside the field. They are not the field itself.

[@mykedoes4099]

@@MasterIvo When saying a collection of tubes one can start with two and picture a toroidal field shaped like a 2D pancake connecting the two tubes. but as soon as you visualize a third tube now you are creating a 3 dimensional plasma field. It is probable that induction of plasma is not possible with two electrodes/tubes i say this cause i am under the impression that plasma cannot exist in 2D but hey what do i know. I can say for sure that I know how to raise esoteric questions.

[@mykedoes4099]

@@MasterIvo kzbin.info/www/bejne/rKu3Zmysa5qkbcU

[@allanlind676]

Ivo, I made a bifilar coil out of 2.0mm speaker cable. It has 26 turns and weighs 441 Grams. I tested it with a NanoVNA and it has first harmonic resonance at 8.75MHz. Should I aim to lower the resonance with a series capacitor? If so what resonant frequency should I be trying to achieve?

[@MasterIvo]

almost 9 MHz that is very high, should be mucht lower, did you connect the end of winding 1 with the beginning of wimding 2? (end of 1 to end of 2 isn't right). Yes put a series capacitor to lower the frequency. I have more videos with much information.

[@allanlind676]

Yes clear colored wire starting at the center of the coil is crimped to the red wire ending at the edge of the coil. Then the red wire at the center will be the positive and the clear wire at the edge will be the ground. In this manner the current always flows the same way around the spiral. I assume this is correct as if I connect opposite the magnetic fields will cancel out.

[@MasterIvo]

yes correct, sounds good. your coils probably have different dimensions and thus a different resonant frequency.

[@vicalcabasa8724]

could the bifilliar coul mimics the behavior of an electric dynamo of a single atom?

[@peterlarsen7457]

I am impressed. Great work. I submit for thought that Egyptians used radiant energy. Temple at Dendera and Abydos, Seti I show a small person aiming an Ankh at something another small person is holding. The reliefs have several Djed being setup and a small version supports a lite bulb at Dendara. Notice each bulb is radiating a particular gender. (this nailed it} Keep up your fantastic work. Now all I see is a hairpin circuit which projects radiant energy and coils on stands as part of the distribution network.

[@MasterIvo]

thanks. the Djed is very interesting to me. seems like a advanced type of device., some how related to a capacitor, but more than that.

[@prometheus1111111]

The two rings basically cancel out into a plane of an expanding accretion disc. Are you trying to Catch energy synthesis in the act with this question?

[@MasterIvo]

yes

[@prometheus1111111]

If you apply a high frequency impulse input to the bifilar you said you are able to generate either high current or high voltages right? If so, why not marry two separate Bifilar outputs both coming from the same high frequency impulse or square wave source? Have you tried recombining them in this manner?

[@MassUX]

@ivo I assume winding the L1/2 low opposite direction to the L1/2 high. (Perception in mind - it ends up being the same direction in 3D when flipped over) Essentially, allowing for a zero point to form in space where you have the L3. Theoretically, this spatially models a 3 or 6 dimensional torus, or intersecting of 2 vortexs. Love you Ivo and Happy holidays. 2020!! Best, Ty

[@haissam9999]

Hi Ivo, I saw you had a new oscilloscope DS2072A. Is there a new reason why you picked this model? Is it the accuracy you need for your new experiment?

[@MasterIvo]

its not new, but yes, very accurate.

[@haissam9999]

Do you still recommend the DS1074 for these kind of experiments, or is it better to buy series 2?. I didn’t order mine yet

[@dianathompson7597]

Is there a positive and negative scalar wave? Can we creat both and make circuits with them?

[@nazgullinux6601]

There is no such shit as a scalar wave. Scalar by definition denotes no change in location by a potential value and thus has no direction hence not a vector. A wave has direction and is a vector. Stop using words that you don't understand.

[@dianathompson7597]

@@nazgullinux6601 Scalar waves are capable of passing through the earth from one side to another with no loss of field strength as Tesla showed in one of his experiments. Traveling faster than the speed of light (superluminal), Scalar Waves are not electromagnetic but composed of pure zero point energy.

[@TalkingMonkey1]

You already know about Ken Wheeler's theories. I think you can stack three coils, the magnetic fields from top and bottom having like poles facing each other, and the third coil centered at the combined, induced dielectric plane of inertia, which has to be electrically and dielectrically interesting. I'm thinking that assemblage models a permanent magnet's field, but electromagnetically, and you can electrically play with the dielectric plane via the centered coil. Alternatively, as a physical visual, one might spin a solid or mesh (grid, spiral, other?) disc or mesh in liquid. Such a disc could be mounted on a slim drill shaft. Surface friction between disc and liquid will create opposing vortexes. Magnetically suspend that disc and spin it using magnetic induction might be a way to remove obstructions and see what happens more accurately. A hole could be put in the center of a solid disc, but I think a mesh (with a center hole) would allow more interaction possibilities. I'll add this to my list of projects. ;) Viktor Schauberger may have done a related experiment in his day.

[@MikePoirier]

Hi Ivo, good video, looking promessing. The red capacitors shown in this video are what type, make and size. Could you provide information ?

[@MasterIvo]

wima 680nF 2000v dc mkp10 (or fkp1) and the tuning caps are smaller 10nF and 1 nf

[@StevenBHalls]

The ring vortices, aka EVOs, have their own magnetism, because the energy spins like a frizbee, so two EVOs of the same size would want to stack and align like 2 magnets. Sometimes they disconnect as a ring but still exist like a sausage, then re-form the ring, and this can capture an adjacent ring, and seem like 2 keyrings joined together. That can happen multiple times to create complex floppy chains of them, called strange radiation that leaves bizarre skipping tracks on the surface of metals.

[@andrejc6532]

“We know that from time to time, there arise among human beings, people who seem to exude love as naturally as the sun gives out heat.” Thank you, Ivo, for existing, save us. Real heroes don't wear costumes or capes. I hope we all find that which we are looking for, as for me it would be akashic records, and that day is close, as I think that ayahuasca will help me (show me the way, and my mistakes) so I can learn.

[@dianathompson7597]

When are you going to do another video?? What is happening with electricity field therapy?????

[@MasterIvo]

chair is working great. video will be when it's time

[@dianathompson7597]

@@MasterIvo I'm interested in treating my chronic fatigue with it.

[@MasterIvo]

@@dianathompson7597 build one, or have it build by someone. All the info is online available on my channel. It will do you good.

[@MrFmiller]

Your comment about ring vortices in close proximity immediately brought the video I passed on to you to mind. As you can see when they collide there is a complex interaction that symmetrically distributes the secondary reactions. I thought there was a potential correlation between what you were asking and the physical phenomena shown. You may be able to use magnetic field viewing film to observe the effect at least on the magnetic field in your experiments. There is a chance that observing the effect might affect the field though. However if you don’t try you’ll never know if it would work or not. I’ve been following your experiments and find them fascinating. If Tesla had the technology and resources we have today who knows what he might have done. Then again were it not for him we wouldn’t have it in the first place. Keep up the good work. I’m excited to see the progress.

[@MasterIvo]

thanks, much of Tesla's later work is unknown. he kept working until his death, only with a smaller budget

[@caimaster6409]

What is the minimum voltage to start the ether？ 1000v? 10000v?100000000v?

[@MasterIvo]

depends on capacity

[@bmxtwins5685]

ferrocell with two magnets will show you interaction of two toroidal fields, they will connect their lines when close enough.

[@pttransamdriver1999]

How is this different from standard induction found in transformers? I dont see any difference.

[@MasterIvo]

take a look at the april 2019 video of me. That lamp isn't bright from magnetic induction (coils are 4.5 cm separate) its dielectric induction, more even so, the coils are series and parallel resonant and should not have any power. but they do light up a 28W lamp.

[@maiamtv2637]

i want to make maximum power full induction heater with pancack coil

[@guyhosson8264]

I believe there has been practical and usable power created from Bifilar coils. Infinity SAV is marketing a 10kw and 50kw Magnetic Generator using permanent magnets and what appears to be switched bifilar coils to produce real power. Thanks for your work. Keep it up!!

[@ScientificLee]

I can say that a flower is a double ring connection...except one is south and one is north in em terms...both are a ring vortex ( or halowave as they are truly constructed)...but they go through a dna frequency code..and so produce petals instead of a ring....the inertial line is the separation between flower on top and green bits under the flower...both ARE rings...just rings of leaves or petals due to the dna frequency code instructions for em flares (invisible and small to start until the mass is added to) , which then attract matter and the flower petals/leaves is made from the air...but constructed inversely reflective ...same as a plant in the ground....or the two differing fields on a magnet...which has 2 rings...not one...as I showed on video.

[@slave_K]

max positive+ on one coil and max negative - on second coil... what would happened if you used both max positives (or negatives), but you flipped one coil upside down, wouldn't result be the same ? wouldnt that simplify your circuits?

[@MasterIvo]

Will try, thanks for sharing

[@mcbusinessmonkey]

I think it would make a different type of electricity. DC being right hand or clockwise turning, the secondary coil might make cold electricity, or a left hand turning implosive style of electricity. If you using this converted electricity, you should be able push all of your circuits or motors through much higher power cycles without burning them. A temperature sensor should tell you if it's cold or hot.

[@oscarobsuna3784]

Appreciate your work! Keep.em coming!!!

[@gyro5d]

I saw a video of rings under water (Aether). A ring bubble when inside another ring bubble. Then, that bubble went inside the first ring bubble. I liked it.

[@MasterIvo]

I saw it to. Its beautiful hiw they interact one speeds up and shrinks while the other slows down and grows in size

[@johnkuykendall7028]

The toroidal formations you ask about are actually pretty easy to pull off. I don’t know if you’re still working on these issues, but if you are we could compare notes and see where it goes

[@MasterIvo]

Can you produce a toridial field?

[@johnkuykendall7028]

@ that’s kind of a vague question. The issue isn’t creating a toroidal field. The issue is decoupling a magnetic toroidal field. Couple of options. …Magnetron or static electric fields. The magnetic field has to have “drag” or friction. I don’t think that’s what you’re needing though.. I mentioned in another video. You need to get those bifilar/trifilar coils up in the air. They need to oscillate at 7.843ish hz and I bet that the oscillating coils that you see in the wardencliff tower are working with another coil at the standing platform level. The last part is sending charged particles up the center from deep underground using the cathode ray tube. Which is the purpose of the 4th coil you mentioned. It’s a particle accelerator. Unfortunately it’s way deeper than we thought. Don’t worry I’ll get there eventually. I always do. 😉

[@MasterIvo]

@johnkuykendall7028 those particles (corpuscules) are only invented by JJ Thomson to be able to calculate on the field energy. He got a nobel prize for finding the electron. but he knew they where virtual tools for doing math.

[@johnkuykendall7028]

@@MasterIvo yes you are correct. The cathode ray tube is my hypothesis.. because of some of the comments he made and The x ray picture he took of his hand. Although the cathode ray tube is a “more advanced version.” His description of the electrical effects in a vacuum for instance. In the terms of charged particles, these are simply molecules that have an imbalance of charge. Similar to a battery, in order to create a flow of electrons you have to have a flow of ions. Newtons 3rd law. So I figured he must have known that the static field he is creating with the low frequency harmonics is sending positive “energy up” and he was receiving “negative energy” as a by product. Which is why he knew to send the electrons into the earth. That’s where the electrode is.. one in the sky one on the ground. Ion flow=electron flow. One cannot exist without the other

[@johnkuykendall7028]

Remember at this point Tesla has been burnt hard by Westinghouse and probably everyone else. No longer has royalties to his patents. Tough times from the war. Last thing he does at wardencliff is overload the circuit and blow it out. He was done at that point. I want to see this tower location and see if the hole he dug to get those poles into the ground is still there. The fact that we can’t get full access to all of his work is probable cause for investigation.

[@data112]

Hi, master, how are you? I follow you in your videos and your explanations are very good, I want to tell you an experience that I had with radiant energy, and with my POE coils, they are like the pancakes you use but I think they are better, because they have the same configuration but they can contain more voltage , I see them more efficient, well I told you that I put the coil inside a water tank, around 60 liters, I immersed the coil in that container and put it frequently, I generate so much radiant energy thanks to the water, which amplified this energy and they started Plasma balls out of my garden, balls of radiant energy, after that it rained, the water tank had a spout that came out to project these waves to the sky, the balls I could reproduce 3 meters from my garden, I mean very close mine, I will replicate the experience and if I can send the videos of the plasma balls, it is all totally real, for those who want to replicate it, hug for everyone

[@partoftheabsoluteone4960]

Where have you gone Master Ivo??? We need an update! :)

[@MasterIvo]

I'm doing the work. it takes time. I'll be back.

[@moonfther]

love your videos keep up the good work!

[@MasterIvo]

Working at it!

[@zdzisawk5198]

a piece of advice. Whatever you are going to produce you will have to shift phases between current and voltage from 90 degree to as close to zero degrees as possible. If you do it you will have huge power gains equal to Quality factor of resonating circuit(Q) In most cases you will use capacitors as current is lagging voltage of 90 degree

[@MasterIvo]

yes already achieved in phase current and voltage, shown in this video kzbin.info/www/bejne/g2LSg5l5gb5mh68

[@JeraldMYates]

Groovy, thanks ! Very interesting. I got your name from Ace Inferno, this evening at Ken Wheelers live stream. I am huge fan, also of Dan Winter and Eric P. Dollard. It looks like i may be adding your name to the list....... Peace ☮🌐

[@MasterIvo]

thanks :)

[@dee5556]

Do know what happened to my first post! What do you think of Theoria Apophasis theories on field theory? And how does it compare to yours? Thanks for your videos!

[@MasterIvo]

His (Ken) field theory is rather limited to magnets. Nothing dynamic with dielectric fields, no impulses, no dielectric induction.

[@dee5556]

@@MasterIvo I believe you misunderstand what Ken is saying. Ken is saying what IT IS according to his understanding. You are discovering a behaviour that exists under a certain condition. Are you unveiling some new field hidden behind the others or is this a new phase of the dielectric field with new and interesting properties? Time and research will tell, but Ken has a huge piece of the puzzle. How BIG is that puzzle??? Keep up the great work. I will share my research with you as soon as I'm ready!

[@MasterIvo]

@@dee5556 yes completely new electric field. Magneto dielectric. it results from fusing the dielectric and magnetic field into one.

[@dee5556]

@@MasterIvo That does not sound like a NEW field BUT A NEW STATE. Magneto dielectric entanglement. An experiment with the LHC caused a proton to loose its mass and behave like an electron. What I think is happening here is similar in that the dielectric field is being torn from its magnetic counterpart and loosing its grip on our dimension and flowing through counter-space till it gets to its lowest potential where it reconnects with its magnetic counterpart.

[@dee5556]

@@MasterIvo VERY EXCITING !!!

[@enochse]

Thank you good sir, you're awesome!

[@CultofTiphereth]

Brother my apologies for what may be a stupid question but then when you just said what electricity actually was it made me think, then what is light how is light different to electric ? can you give a simple answer for a beginner. it is just a matter of phase between the Dielectric and magnetic sorry if im sounding dumb. thank you!

[@MasterIvo]

good question. Basically: everything is electric.

[@thecharlygroovework]

I guess the the simplest way to see two vortex in action is to look on a river course as viktor schauberger, everything in nature is about female and male vortex interaction, actualy the margnetism and of course gravity is created by electricity charges intereacting, wich is the result of two field wich are unbalanced with each other like walter russel explained in their books. I enjoy a lot your videos man, the world needs lot of guys like you, keep the good stuff

[@MasterIvo]

we all have our unique role to play. This is my passion. what is yours?

[@thecharlygroovework]

Master Ivo my passion is to break the rules imposed for those who are only interested on keep us slave of a system build to make you believe that you have no power at all, that you need to pay for everything and your value in life is about the money that you have. Is time for us to understand who we are and what we are doing here in order to have a life and enjoy it instead of waste our time getting empty stuff in a effort to avoid boring or be someone like we are all encourage to be when we go to school and we start to learn who we think we are and what the world is

[@MasterIvo]

beautiful@@thecharlygroovework very powerfull. Your lion power profile pic suits you. I hope you can inspire many to find their own power to break away from their self emposed chains, with your power.

[@pehgt5099]

@@thecharlygroovework World is one big fraud system whatever school teaches kids is far from reality only fake programming to put our minds inside a little box... History = his story and Television= Tell lie vision School = Endocrination programming

[@sinsemilla9876]

David LaPoint's Primer fields show two vortex in space and laboratory interact i think? been a while since i watched it.

[@MasterIvo]

yes I have seen it also

[@Gap-Generator_Replication]

Some Ring Vortexes in Nature. Colliding vortexes: kzbin.info/www/bejne/e4fFlZWMnd-Wg5Y Fun with Vortex Rings in the pool: kzbin.info/www/bejne/bWOviKVtd7prd9E It's also talked about at around the 6 minute mark in this video: kzbin.info/www/bejne/pnypoGeahLxni7c Cheers!

[@mxcollin95]

The channel Getting Smarter Everyday did a vortex ring collision video that is close to what you’re asking to see. You might take a look at that as food for thought. I’ll say this, the result of the two colliding vortices is not what you would probably envision. From what I remember, when the two vortices interact they created many smaller vortices that that were perpendicular to the two original vortices. The newly created vortices radiated outward from the center of the vortex rings much like spokes radiate out form the hub to the rim of a bicycle wheel. If memory serves, they set up the vortex ring collision in water using different color food coloring in each vortex ring so you could clearly see how the two vortex rings interacted with each other when they collided. Visually the experiment looked really cool and showed clearly some complicated looking interaction. Ps. Just found the link. kzbin.info/www/bejne/e4fFlZWMnd-Wg5Y

[@Bilal-ud2uz]

Nice to meet you!!!!!!

[@MasterIvo]

:)

[@clarkcowan3984]

There is a video about ring vortecies in fluid being shot at each other. It's that blonde happy guy. They hit each other and blew out new miniature rings at 90 degrees and moving outward. They used colored dyes. You could have two vap guys face blow each other too... Where do you study. The 3d ideology is what is missing. You are the only other one I've seen with the right questions. I'm trying too.

[@tamaseduard5145]

👍 Happy Holidays 🙏

[@MasterIvo]

thanks you too!

[@juanmf]

You need two experienced smokers blowing clashing ring vortices :)

[@handologytv8527]

I agree with Master IVO (Postgraduate degree in electronics)

[@yuseffnehru8612]

May Allah bless you for this video ☺️

[@paulwedlock9788]

Slumberger and the nature of water flow 🤔👉A coupling super interaction will occur & the result will be dependent on the phased interaction (doubling up or cancelling out? 🤔 👉 Like the quantum slit experiment) 🤔

[@MasterIvo]

eh what? Simultaneous Field implosion is what I am after

[@Xeno_Bardock]

I would like to see a video on what the fields of l1, l2, and l3 coils look like when viewed under ferrocell if possible.

[@MasterIvo]

Hardly possible

[@kolinevans9127]

Great video, thanks for sharing, I do think Tesla was /onto/ into something when explored this.

[@rossblake101]

magnetic affects on germinating seeds is interesting - collapsing south pole creates better seedlings

[@TheFarmacySeedsNetwork]

Merry Christmas !

[@MasterIvo]

merry festive too you all too

[@chrisrosenkreuz23]

for a better visualisation take the toroidal flow and divide it into the types of motion comprising it across "dimensions" (for lack of a better analogy): a vector encountering opposition is forced to be split into both directions that are perpendicular to it (the resultant between it and the equal and opposite force it encounters) in 3d (or 4d whatever) space you have a whole set of these bunched up in all possible directions _including_ inward. now, the question of the chicken or the egg comes to mind but this is not an either-or scenario because the whole situation is necessitative so it is more of an if-then-else type scenario.

[@JanMartinusSlootmaker]

A good idea Very promising indeed

[@gyro5d]

Have you heard of the Ferrocell? There's a vortex between N-S, N-N, S-S. Not sure of directions of rotation, yet. Magnets do not attract or repel each other. The poles are attracted and repelled by this null vortex. Ken Wheeler's videos. Have seen opposing rotating vortexes along the Mandelbrot set's edge. Look like, phi:1. With an Inertial plane from inbetween the opposing rotation vortexes. There are Fibonacci numbered antennas on the knobs of the Mandelbrot set. (Dr. Holly Krieger).

[@elams1894]

I like Ken and his theories however I have to disagree with his observations within the ferrocell. The nano particles of ferrous elements are rods when viewed under a microscope. The nano rods align vertically (radially) in the presence of a magnetic pole. The signal from each LED will reflect off any rod that is perpendicular to it. As the nano rods are 'wagon wheel' like radial from the pole, the reflections appear to create a curved path. However light is in no way curving. There is no reflecting light occuring in the centre because nano particles do not exist there as they cannot align themselves so eject themselves to the the pole edge. When a solid ring LED is used there are no lines, just a solid gradient. Search ferrocell and microscope. I agree with vortex theory in addition to much that Ken says about magnetism, however not the ferrocell. Cheers

[@gyro5d]

@@elams1894; Two extremely flat pieces of glass, very close to each other. Casimir Effect.

[@elams1894]

@@gyro5d.. What does the Casimir effect have to do with the ferrous nano particles and the optical illusion they create? Cheers

[@gyro5d]

@@elams1894 Casimir Effect is the Aether field vortices of Space and Counterspace (plates). The plates attracted and Repelled by the Inertial plane (nano-rods).

[@gyro5d]

@@elams1894; The Dielectric Voidence Field/Magnetism is 90° to the Dielectric Energy Field. I haven't seen the vertical rods under a microscope. I'll believe that they are vertical. Light is perturbations of the Aether Field. Lights rate of induction is Magnetism's rate of its creation. Both Dielectric Energy and then its Dielectric Voidence Field are needed for the nodes to be created. From their transverse fields, to perturbate on/in. It's dark at the center, meditated to the Inertial plane. Gravity, centripetal acceleration into the Inertial plane/Counterspace is dark because gravity is Dielectric Voidence Field/Magnetism returning to Dielectric Energy, then into the Inertial plane. When Dielectric Voidence Field/Magnetism returns to Dielectric energy (Radiant Energy?), there are no transverse waves left for Aether perturbations to travel on/in. Thanks.

[@globalteamwork4light]

are we talking scalar here? i think we all miss out on one thing big time here - can we have free energy in electromagnic systems, or not? is it nessesary to move to scalar, as tesla said numerous times? if yes, youll have to make a faraday cage in iron, to make a scalar isolation filter. one that both inhibit magnetic an elctric fields. if tesla was right we can fool ourselves forever with EM waves...

[@MasterIvo]

longitudinal waves, yes. from High dV/dt. working on progressing that. already showed it in my last video this summer (2023). working on progressing that right now. pure EM doesn't cut it.

[@globalteamwork4light]

@@MasterIvo i am working on exactly the same, right now and i can recommend tuning s1 and s2 with series caps. without them no ou. it is important to tune s2. eg. with a variable air cap. then the locking - or symbiosis will occur. still recommend to put at least one s2 into a faraday cage - so you know how much scalar the system is running at.

[@rossblake101]

try smoke or water.. i track fish.. they go upstream or into the wind the vortex cancels, downwards or downwind the vortex is doubled. south pole is collapsing so i suggest they act similar to nature

[@DJ_Koob]

Thanks!

[@MasterIvo]

You too !

[@ahmetozkamal8198]

4:45 hey you might want to look at those vortex rings colliding

[@ahmetozkamal8198]

kzbin.info/www/bejne/e4fFlZWMnd-Wg5Y

[@VAARRR1]

Hi can you make a simple circuit, 2-5 KW so that anyone in the world can repeat it create a video, add a list of spare parts,

[@MasterIvo]

yes

[@VAARRR1]

@@MasterIvo Do it

[@MasterIvo]

yes

[@dragodv7735]

Im first here mate.First like.Keep up the good work buddy!!!

[@MasterIvo]

thanks!

[@JasonJoplin]

Here is the link to the 12 hrs of footage! kzbin.info/www/bejne/eZ6cnWtjptOaoK8

[@rossblake101]

direction of flow may be the critical point here.. north pole opening, south closing..

[@martymulhall680]

The video link below shows some guys simulating two vortices colliding with coloured dyes,. The collision produces several smaller vortices at right angles to the plane of collision. The energy must continue at 90 degrees and (at least some) reformers the vortex form and continues. I can't find the original video, but here's a link to someone talking and showing footage from the experiments. kzbin.info/www/bejne/e4fFlZWMnd-Wg5Y

[@seanperez1210]

Close your eyes and look at the sun.. you can feel it more with the radiant heat.. more so see it ... your eyelids act as a “screen” or membrane that the light projects on.. maybe don’t try a crazy sunny day... at that point you can visualize it how you want..

[@sk8pkl]

Here are some interactions of smoke rings that are very interresting. kzbin.info/www/bejne/sIe7g2quqdmIm9E .There is one trick where two rings interact slowly together and they seem to fuse together and form a really long ring. It happens twice, but the camera dosent focus on that th second time. There is also a trick where he wobbles one big ring and it separates in two rings. The interactions here are going in the direction and the same spin. Ill link another video of two toruses colliding together. 2 different directions. They collapse and cancel out their speed and the effect acterwards has no spin to it. Ill try to find it. If i remember they are also smoke rings and they are colored.

[@pehgt5099]

Ever heard of a Kapadzne Generator they tap into earth energy bcoz earth is a Capacitor then a reverse Tesla Coil is pulsed Also when putting a pancake coil on top of an induction cooker one can get free energy out of it by tricking the circuit and putting steel on top thus opening the field...

[@RT-hl4uk]

I assume by now you have seen these, but I'll post them here just to make sure. kzbin.info/www/bejne/e4fFlZWMnd-Wg5Y to answer your question Master Ivo wouldn't it follow the right-hand rule, depending on direction either they would be additive, or destructive? If they are aligned perfectly they would spawn vortexes tangentially. Otherwise, like these other videos they will combine and continue on their path influenced by greater force (in this case buoyancy, but it could just as well be a more powerful source) kzbin.info/www/bejne/onvJopqjl86kpLM kzbin.info/www/bejne/mWLWpIaapt15jtE kzbin.info/www/bejne/gXnGYaekbdF6idU There is one example I can't find right now. Where traveling together in the same direction the one from behind was pulled throw the middle of the leading one. Then becoming the leader and returning to its original size, it then pulled the trailing one throw itself and the cycle repeated until they combined overcome by buoyancy. I'll keep looking.

[@Halumash]

Isn´t our Chakra System a System of vortex´s - Or the solar system and init Saturn with his visible rings ? The universe is a vortex generator 🙂

[@MasterIvo]

new video on dielectric induction producing ground currents: kzbin.info/www/bejne/oZOrdXufdralqNU

[@sk8pkl]

kzbin.info/www/bejne/e4fFlZWMnd-Wg5Y Here is the second video i was talking about.

[@martinhughes1854]

When they collide they go fractal and create many miniature vortices perpendicular to the larger ones: kzbin.info/www/bejne/f6CUkmVjYpVgidE A vortex is a frequency transformer. They occur around antenna and are thought of as noise. Konstantin Meyl writes about this somewhere. High frequency, high voltage transients using single wire technology and dusty plasma discharges are key to many LENR effects.

[@Buzzhumma]

Man does this start the imagination . One half of the whole . I don’t think you will see it in nature unless you train your eyes to see non solids as equal resistance . Like a birds flight start as pushing from a solid and then utilising the ground effect en.m.wikipedia.org/wiki/Ground_effect_(aerodynamics) and then switching to pure aerodynamics of lift from highly efficient wing propulsion .

[@1272-f9v]

The magic word is friction ;)

[@MasterIvo]

reminds me of resistance. and negative resistance (which could be seen as a discharging capacitor)

[@caimaster6409]

Wish you happy chinese new year！

[@MasterIvo]

Happy new year to you! new video will take a while. first doing experiments.

[@5dshift1playlist33]

I am proposing a new model to explain your dielectric impulses based upon chapter 4 of "lost science" by Gerry Vassilatos. If you do the math, small charges such as 70mV across nanometer nerve membranes create voltages higher than whats used in the biggest power plants on earth. You achieved high voltages with fast discharge time. What I believe is occuring is that you are using high voltages to shake the atoms enough that they release subatomic particles at the planck's constant scale. The maximum positive & negative discharges shake the atoms most effectively. Since this is an electrical effect, vortex mechanics is not required. Once released, these particles are repelled out of capacitors by electrons. They move to positive charged surfaces. This explains the skin effect observed along metal tubes in Vassilatos' book. They must exist outside all matter to create perpetual motion & charge, therefore vacuum acts as a gas. When they are released, they produce high pressures which cause movement. This motive force was described as whitefire in Vassilatos book. They produce overunity when they are recaptured by Low Mass Electrons.

[@viestursp]

Add BTC Donation link also ;)

[@GiesbertNijhuis]

Can you describe more precise how the position of these 2 vortex rings should be? By the way: a vortex ring in air or water is always on the move. 2 can meet but standing still is against its nature. How you can experiment with this: put a round plate half-way in the water, move it a bit in 1 direction, take it out quickly, and you can see (with proper lighting) a half vortex ring, moving through the water. This time I have no video myself, but physics girl does: kzbin.info/www/bejne/pp_Fe3idbtdkpZo I don't yet get what you are up to, but it sounds exciting, looking forward to your next video!

[@MasterIvo]

Thanks Giesbert. both rings close by, so the rings nearly touch on the same axis, same rotation, but also counter rotation . If a vortex ring is stationary, the air/or water (aka Aether) would move.

[@FractalWoman]

@@MasterIvo Vortex rings propagate through the medium with which they are created. If they didn't move (if this was possible) then the medium would have to be moving through them. This would be a vortex standing wave. If vortex standing waves exist in nature, intuition tells me that they should appear in pairs, aka. vortex-antivortex pairs.

[@MasterIvo]

@@FractalWomanif the coils produce them, they are stationary, so indeed instead of moving rings, we would move the medium. (aether) I wonder if 2 rings together can produce pressure.

[@FractalWoman]

@@MasterIvo Aether pressure? I think a better question is, can two rings generate power and do work. That is what it is all about. Creating pressure is of no use unless it can do work.

[@dee5556]

@@FractalWoman I'm confused, Is the purpose of all this to discover the properties of aether and or radiant energy or to produce work? And work for what? There are much easier ways to tap in and get work done than all this. Recipe for Free energy You only need HOT GLUE ;)>, 1 coil, 1 diode, and one switch a heavy load with low capacitance and low resistance, and a bit of thought. Your welcome!

[@wyattcarpenter8951]

Look at a clamshell laid flat

[@Malaclypsei]

Birkeland currents check thunderbolts project sounds like plasma cosmology is what yer after