Begode EXN Review // Why is THIS eWheel So Exciting ?? | evX

[@ShaneHilde]

Great video Mickey. Your enthusiasm for the wheel definitely came through in the video. It’s fun to watch a review the rider is excited about.

[@evXNYC]

I wish the freakin bearings weren’t an issue

[@letssamplethis7641]

Can sarcasm still be excitement? Right at the opening , I knew there was something wrong with this wheel. And then, the race happened. Yes, Veteran still beat the GotWay. Until GotWay changes a few things about batteries and the Motor, there wont be a GW that will make any of us happy.

[@WinkieDuck]

Great video. Def noticed amount of effort for this video. The shots, the intro skit, everything, above and beyond video making.

[@GGnext.crazycro]

Yep! Cant wait for the Inmotion V12 Embargo to be lifted

[@Ambrovious]

Awesome...thanks Mickey, always enjoy watching your videos...great balance between humor and tech.

[@ggbiz6679]

Hahaha gotta love that last part you're really good at teasing/cliffhanger... I hope this march you'll show the new thing... As alway great content...

[@evXNYC]

Yeah stay tuned for the v12. Ive been helping Inmotion develop/test it for the last few months.

[@ggbiz6679]

@@evXNYC interesting so both of you & madPack have contributed on the development of v12... Now i'm really intrigued... Damn you really are good at teasing people's interests...

[@Ambrovious]

@@evXNYC Sweet looking forward to it...Glad Inmotion got you involved...I already have three of their wheels so why not 4 LOL 😂

[@evXNYC]

I’ve had the v12 since Christmas. I think you’re gonna like the features i helped them add.

[@ggbiz6679]

@@evXNYC arg! Okay okay thanks for the info... I'm gonna stop here for now, gotta stop asking 'coz i don't want to expect too much... I' ll just patiently wait for your review...

[@mr_wrongway]

Thanks for the vid Mickey! Interesting stuff

[@Stan0619]

BRAVO, superb acting chops!

[@09Bugg09]

It's funny that it's a known fact all these new hollow motors have unsealed bearings that aren't protected against the environment elements they're ridden in. You mention the roads had been ploughed, salted and there was only slush. As soon as I heard the word "salt" that's asking for issues especially mixed with some water it's going to corrode/rust metal at a fast rate.

[@ZenLee]

such high quality content! does your Sherman have the new firmware?

[@evXNYC]

Not yet.

[@ZenLee]

don't recommend it for racing, but only tested for a few minutes, feels sluggish. I'm keeping my 4.29 1053. Thanks again for the super high quality review.

[@RobUKTH]

A very tempting wheel, once Begode sorts out the bearing issues! Thanks Micky! 👍😎🙏

[@letssamplethis7641]

evX - Another solid review. No bullshit. If it sucks, you make sure everyone knows. No sugar coating. This hollow bore trend is ending fast for GotWay. Time to go back to the old motor. Looking forward to the new wheels you will reviewing.

[@jayden56858]

3000 miles on my monster v1 :)

[@KirstenMach]

Hollow bore is still here 3 years later and not going away

[@letssamplethis7641]

@@KirstenMach yeah, that was like how many years ago? Hollow Bore has been significantly improved upon.

[@richsam287]

Fantastic as always. Drool about that wheel!

[@andyl2991]

Great video!! Was awesome to see you guys racing wish we could have seen the side view of you both racing, but anyway amazing great editing👌

[@OliGerard]

Nice review Mickey. Already shared in our Wheelers Pro group on Facebook. Don’t hesitate to join us there. There are some fans and we will be more than happy to see more quality content like this !

[@thugis07]

Great video as always man 👍🏾👍🏾👍🏾 That’s how my v11 sounds from riding in rain and snow for a month now but it works fine it just makes that annoying sound but it rides well and smooth. The braking is great the acceleration is great turning everything is good. I did get a replacement motor but gonna change for the summer and they said it is from batch 3 so hopefully this situation won’t happen again

[@scottsum1319]

Good stuff & great that you got a new vid. Very fair & good review IMO. Honestly after all the hollow bore bearing issues on all of such wheels, I'm starting to think this is a misadventure of a solution no one asked for esp when it wasn't broken in the 1st place. I'm thinking there may not be a solution.

[@MADpack]

I have done 500km on the ex and 200km on the exn in snow mud and really bad weather conditions (worst winter since im in the uk) and no issue. Beside that I disagree with you micky about the torque.. Yes it is torquey but the EX forget it. Much more powerful bro ;)

[@ZenLee]

I only tried the EX, it didn't seem very powerful off the line, (kinda sluggish acceleration), want to test more though, only had 5 minutes.

[@FlyboyEUC]

EUCO's EX.N, (with a 40 mph 80% beep with 150 lb rider) was painfully slow and not powerful at all. It would slow down on hills the MSX would accelerate up. I just chalked it up to a bad board. The replacement board didn't work either. I hope this gets fixed because the wheel sounds fun.

[@evXNYC]

Beeping at 40?? That doesn’t sound right.

[@FlyboyEUC]

@@evXNYC yeah, lift speed matches the 100v MSX. It's definitely a bad control board

[@evXNYC]

Yeah lift speed should be about 63mph which would mean top speed is 53, and your beeps would start at 46 or soemthing

[@LR11Gaming]

I like the song choice at 2:00. When the fire starts lol. Gotway

[@evXNYC]

You know it

[@christurboiwinski6743]

One of the best wheel gotway has made

[@WESTsChannel]

But wrong way said it s build - quality is so bad

[@jayden56858]

@@WESTsChannel not to mention the already bearing issues

[@christurboiwinski6743]

@@WESTsChannel when i mean best wheel. I mean how it feels when you ride it. Your fully controlling it. Not like the sherman just that old msx feeling. Thats why its the best wheel.

[@evXNYC]

@@WESTsChannel he’s correct. Typical GotWay internals.

[@jamesbaynes6580]

Nice!!!!......Welcome back riding in NYC. Now just waiting for warm weather....

[@abdullaalwikabil3371]

great video good details,i cant wait for my ex.n to arrived so i can go for speed

[@Francisco-ld5kg]

Gotway should have really Q.C. their product before final release and I'm sure they would have been a great contender to start the year. But instead it's a cloud of hesitation.

[@arcrides6841]

The way people praise the EXN over the EX has me thinking that suspension on an EUC just ain't worth it. I always thought that it would take too much away from these inherently simple machines. And adds too much bad stuff. Weight, size, maintenance, complexity. And I'm beginning to think I'm right. I'll still try one some day. But I doubt it will ever be my "go to" wheel. For me the Sherman is fine. I ride over these hardcore speed bumps at 60 km/h. Even my minivan can't do that. Without destroying the suspension that is. The Sherman is simply....... ✨amazing✨

[@jaredboulderterry3912]

I have the ks18 and if you plan on doing park terrain jumps etc the ks18 takes it to the next level, super light super fun. Veteran tho is best all around

[@arcrides6841]

@@jaredboulderterry3912 Yeah that's a good point. I might get one just for that. When I do jumps on my Sherman I cringe every time I land. Just feels so hard on the machine.

[@arcrides6841]

@@jaredboulderterry3912 Although I'll probably wait for something more powerful to come out. I imagine you'd want good acceleration for jumps. Otherwise you'd need lots of space to get up to speed.

[@arcrides6841]

@@jaredboulderterry3912 Although I'll probably wait for something more powerful to come out. I imagine you'd want good acceleration for jumps. Otherwise you'd need lots of space to get up to speed.

[@jaredboulderterry3912]

@@arcrides6841 ya if the ks18 was as powerful as the msx that would be a perfect combo

[@Kamikazekman]

Amazing video mate. Thanks for the review! I still think the Veteran will be my next wheel though I didn't know about the hard breaking issue...

[@evXNYC]

That only exists under 20mph. The Sherman is tuned for high speed so it’s inefficient below 20mph so don’t pull a wild emergency stop under 20. Above 20, go nuts!

[@Kamikazekman]

@@evXNYC Righto. Thanks for the tip! Hopefully by the time I upgrade to the Vet, it'll be the Vet 2 and they'd have fixed it. Unfortunately... under 20mph is probably when you'll need emergency breaking the most since you're going through high populated areas and most likely going those speeds as you dodge clueless pedestrians!

[@evXNYC]

Lol huh? I’ve never hard braked under 20mph. Except that one time when i was trying to brake on camera for a Vlog.

[@Kamikazekman]

@@evXNYC hahah Maybe in the NYC... Here in Sydney pedestrians are clueless (as well as a few drivers who turn into bike paths without looking)! My work commute takes me through high foot traffic city areas so being hyper aware of mindless pedestrians is a necessity and traveling above 20mph (32kmh) through those areas is just dangerous for all. And unfortunately, riding a PEV is technically illegal here in Sydney so opting for the road option is just asking for hefty fines.

[@jamalmodica3286]

thank mickey! nice review, mine should be here any day now

[@SebastienNizetSoundDesign]

Another great one Mickey! Those b-rolls are killer! Great review though 😁 I really think next one will be the sherman for me ... ✌️

[@mr_wrongway]

Content starts at 4:13 ;p cool to see a EX.N review from you Mickey!

[@evXNYC]

Content starts at 0:00

[@mr_wrongway]

@@evXNYC 0:00 intro 0:37 info about purchase 0:45 music intro 0:56 skit about buying EUCs (I like it but I’ve seen it before) 1:51 B-Roll 2:35 Fantasy journey into Begode Land 4:13 actual tests begin!

[@evXNYC]

It’s an ad, it’s not a skit. It’ll be seen for months to come.

[@evXNYC]

My channel isn’t about testing. It’s about opinions

[@cheapshotfishing9239]

Play nice you two

[@gtaeuc6828]

Wonderful production👌🏾

[@MGSSnakeEater100]

Nice speed test between the EX.N and Sherman 😎👍

[@000ultimate]

This....THIS is the video i have been waiting for!

[@BunnyslippersEUC]

I am already sold on the Ex.N. Don't hype it more Micky. The bearings must be fixed in the next batch. I want the Sherman, Nikolas plus, Ex N, TESLA 3...my head is spinning😵.

[@scottsum1319]

My head is spinning as well just reading about it! LoLs! Can't blame ya though cos we like our toyz. That said, you should as a suspension wheel to that list as well.

[@BunnyslippersEUC]

@@scottsum1319 I hate you. Of course I need a suspension wheel. But not now while it's still in its infancy. V11 is a fantastic night wheel and S18 is great for jumps and technical riding. My head spinning 😵.

[@landocycle]

Man, your production quality is unreal.

[@BennyMartinx]

Still think the Veteran Sherman is the complete package of performance. Thanks for the review!

[@coolhawk2003]

Tell you meet a hill

[@AfeezKayeRIDES]

EX.N woow 🙌🏼🙌🏼

[@christurboiwinski6743]

An amazing wheel.

[@johnnygovroom]

The exn is the faster wheel definitely. If that’s how Turbo did on his first feel for the EUC.. I have no doubts. You know that Sherman inside and out, he won by what’s called in any other sport a ‘handicap’, or a clear disadvantage in preparation, gear, injury etc.

[@Tangeffect]

Why is this man not as big as the Wrong Way and the others. One day bro. Your quality is impeccable. 🤙

[@Sunsetflorida1]

IMO, Salt from clearing road’s is still in the slush. Slush is water and unless this bearing is sealed, rust will ensue.

[@SwitchUpYt]

I love the LUT you use - care you share it haha

[@evXNYC]

Lol I don’t use LUTS, I am a colorist for my day job, so I give each video a custom grade. Sorry :/

[@SwitchUpYt]

@@evXNYC Wow - that’s seriously impressive - your videos are by far the best shot EUC content on the tubes. GG good sir keep it up!

[@TheDownloader86]

Absolutelly stunning video man! You deserve milions of views! BTW do you plan to review GW Tesla V3? Seems like amazing cheap wheel. I ordered one but I think that hollow motor is just expensive mistake. So easy and cheap to change bearings in normal wheel...

[@RCDevotee]

Thanks for another great video! I haven't seen or heard anything yet to dissuade me from picking up a Sherman this year. I am near 700 miles on my Nikola and feel comfy riding it in San Francisco streets on group rides. I can do them on the Nikola but I think the Sherman would be an even smoother and faster experience.

[@evXNYC]

Thx

[@judgesfiveeight]

OK... pausing the video right here... your "European-American shopper skits" are gold and will be as classic to me at Duf's "Extreme", which, incidentally, he hasn't done enough of lately in his vids... Thank you for this. Lynch-out

[@evXNYC]

EXTREME!

[@GyrocopterGirl]

Thank you for the review. We will get our EXN next week, so hope it is water proof, otherwise will have to buy marine g and silicon hahaha

[@grege1972]

New heavy 200+ lb rider. What would you recommend?

[@vinnyqm]

Has that motor scraping thing been resolved yet? Any update at all from 11 months ago?

[@UStride]

Brutal 🔥

[@PaulA-pm3gx]

Great honest review vid.. If you are able to have input with the EUC manufacturers, maybe suggest to them to have lights with a fresnel lens. It's the lens used on lighthouses (and searchlights), credited with saving millions of ships, invented in 1822. It concentrates the light into a relatively narrow beam. Even if made from cheaper plastic, it would dramatically increase brightness of the head/tail lights. Maybe use the super bright Cree (US brand) LED light, or the equivalent Chinese knock off. Great vid, look forward to the next vid on new EUC V12, thanks.

[@TheGrandeurLife]

Love the EX/N but don't like the bearing situation on the hollow bore motors.

[@evXNYC]

I don’t blame you man.

[@Ronin_Ryder]

Nice video again. Where are these wheels going to next? XD

[@evXNYC]

Who knows.

[@SunsetEuc]

What is the black pants your wearing on this video?? there fire I need to get a few pairs.

[@jonathan842]

I love ur vids(quality AND content) I gotta admit, i was like:" ok, they are gonna do 3 rounds n then switch and do another 3 rounds" so i was shocked when u had said torque is insane yet Sherman out-torqued it(and Sherman can't break fast!?)?!? I think i am missing something(my understanding of torque)...to me, a wheel that has torque TAKES OFF AND BRAKES with hella result....i think my mspt does that. I have tried the sherman a few times and would never put it in da same torque category yet i was looking fwd to the ex or exn for my next wheel(just for that EXTRA torque) and am not so sure about that now. What could b a gr8 "torque-vid" would b : mspt, ex(n) , a mcm5 (for good measure) and Sherman torque(0-30/40-0kph) and switch(cuz some riders may torque a wheel better than another and some riders are better at exploiting a wheel at low speeds and others exploit beeps better.....and then finish that vid with max speed😏 of course😉😅😂

[@evXNYC]

Message me on Instagram and i can explain better

[@ItsBinhRepaired]

You need to have the same rider test each wheel with the same type of side pads. If you have a rider experienced with their wheel, of course they'll be able to use it to its full potential a lot better. When they did the Sherman vs the EXN, I was disappointed they didn't switch riders. After riding for a while, you get to know the limitations of your wheel and know how hard you can push it. The EXN, being a new wheel, there's some fear in the back of your mind telling you not to push it so hard.

[@evXNYC]

We have switched, and Turbo has rode the EXN more than 3 races. These wheels are on par speed and torque. I’ve obvious rode both of these for many miles

[@ItsBinhRepaired]

@@evXNYC hmmm so when the EXN won, who held back? Lol

[@evXNYC]

No one. I just lost.

[@-racingfan2014]

How exciting is the packaging of the components on the inside of the EX-N? Still made in backyard quality? :-)

[@evXNYC]

Yep

[@chizuck3322]

So did the issue get fixed or is this still a thing?

[@daley1985]

Can the hollow bore bearings be packed with grease like car and truck wheels??????

[@evXNYC]

They are, and we’ve repacked. The issue is the vacuum effect caused by the hub cap and the bearing setting. But also they need to use a better bearing.

[@HSterlingCross]

What's the discount code for the Clark Pads?

[@heymelon]

So is that a top end torque test vs the sherman? Can't quite tell what speeds you're starting the drag race at but it seem to eliminate low to mid end torque end comparisons. But speeds can be pretty deceiving on the selfie sticks.

[@evXNYC]

We started at 20mph - Sherman cuts out below that speed if you take off fast.

[@heymelon]

​@@evXNYC Oh, interesting. Ty for the update!

[@arthurrobey7177]

So, what's a hollow motor and which of these two Begodes have suspension and why is that bad?

[@evXNYC]

Neither have suspension.

[@TechnologyGeek862]

Any news on the smaller Veteran wheel? Been a few weeks out of the scene. This wheel looks promising but the QC worries me.

[@evXNYC]

No news yet

[@Born2Ride108]

Did you have the new Firmware for the Sherman installed for that race?? Several of us have commented that the V.2 Firmware that Veteran is using while correcting pedal issues actually lowers the performance curve both for torque and top speed.

[@evXNYC]

Nope. OG firmware.

[@Born2Ride108]

@@evXNYC Dont do it!

[@evXNYC]

I don’t plan on it

[@manuelsanudoguerreira7319]

@@evXNYC Shit, I hope my batch is previous to that update.The press buttons are red and the sealing of the mamaboard looks better but I admit this new features surprised me when I got my Sherman delivery three months ago...Any clues, anyone?

[@kevink2765]

Your discount code for the Clark pads, isn't working Mickey

[@evXNYC]

Clarkpads.com/evx isn’t a discount. But it does give me a kickback, so if you wanna support my channel use that link. But you don’t have to. I appreciate ya either way!

[@206robert206]

"When carrying it upstairs " Me: 👁️👄👁️ *write that down, ya can't ride upstairs*

[@fredisyoga873]

So the latest batches of GotWay wheels with hollow bore motors have solved the bearings issue? Hmm because I want a secondary commuter wheel and the 1480wh Tesla V2s are all sold out. Have to wait till fall for batch 2+ on the T3 and see for your guys reviews haha

[@evXNYC]

No not all new GotWay have hollow bore. Only RS, EX, EXN, MONSTER PRO. Also the inmotion v11 has hollow bore.

[@fredisyoga873]

@@evXNYC Yea that’s why I wanted a Tesla V2 since the upcoming T3 has switched to hollow bore, so sad.

[@scottsum1319]

@@fredisyoga873 I have the TeslaV2 1480 & its been a champ. No issues & for what it is, its the best bang for $$$$ evar. If its a 2nd wheel & if 30-50kms work, the MCM5v2 is a solid choice. Goes like stink, climbs like a mountain goat & does pretty cool in skateparks too. IMO ofcos

[@fredisyoga873]

@@scottsum1319 Damn. Wish I got the 1480wh V2 when it was still available. Yea the mcm looks great but want to use this one mainly for road and a bit more distance.

[@RocABye]

It’s a great video BUT not a fair comparison. There’s a lot more drag on Sherman’s knobby tire the their is on the EX-N street tire. I believe if you rode a street tire on your Sherman you would have blown the EX-N away. Let’s get another comparison for the new generation of EX-N and Sherman. 👍

[@TheChase76]

Mickey one question from a stand still take off do you think the Sherman would still win?

[@evXNYC]

No. The Sherman is tuned to be a beast above 20mph. Take the power output and shift it up for Sherman and shift it down for EXN. EXN will tap out before the Sherman. Plus the EXN gobbles up battery so fast!

[@TheChase76]

@@evXNYC that’s what I thought thank you for your response I’m waiting on the next batch from ewheels

[@evXNYC]

@@TheChase76 which wheel?

[@TheChase76]

@@evXNYC the Sherman it’s not a slow wheel but that battery got to love it

[@evXNYC]

@@TheChase76 Sherman is e fastest wheel on the market right now. In speed and torque.

[@lawlaxinaakayourfavorite]

Rider weights during that drag test?

[@evXNYC]

No idea

[@lawlaxinaakayourfavorite]

Lol. That could play a huge factor

[@evXNYC]

Meh. It’s theater.

[@manuelsanudoguerreira7319]

@@evXNYC 😄😄

[@zoomwheelsbrian7782]

ZoomWheels brian Micky lol 😂

[@Simonisms]

If you changed your surname to Zoomwheels you could officially be Brian Zoomwheels. On your passport an everything 😂

[@jaredboulderterry3912]

Honestly when you add the sherman's durability after a crash....I have the msx100v, I previously owned the msp, not very durable crazy torque tho. Ks18, and the sherman. The sherman is the best wheel overall and most durable.

[@evXNYC]

Agreed

[@mikeintampa250]

Hi Mickey, great demonstration on the wheel, but to me more importantly, on the bearings. It's like Gotway's going to have to redo all their recent wheels not yet sold and then what happens to the wheels that are out in the wild?

[@evXNYC]

The wheels out in the wild are just flawed versions that bleeding edge enthusiasts bought cuz they have no patience lol

[@mikeintampa250]

@@evXNYC Lol, going to be an expensive fix for Gotway and/or the dealers bc warranty

[@mikeintampa250]

@@evXNYC Glad you are better too!

[@manuelsanudoguerreira7319]

@@mikeintampa250 Forget about Gotway fixing anything on wheels already sold. But that waterproofing protocol is very interesting. Greasing throughly the bearings and then reattaching the seal should help a lot but I'm concerned about that vacuum issue I think I heard Mickey talk about and I didn't quite understand what the problem was if you greased them up.

[@MitchG]

Shame about the bearings. So much potential

[@jeanpaulmoreau9598]

thanks for the video, definitely enlightening that Gotway gave you lip service and didn’t addres the issue.

[@maxibelino3174]

Great video! thanks, keep riding

[@evXNYC]

You bet!

[@RiseKeyk]

Can we get a link to your guy who fixes EUCs???

[@evXNYC]

Yea for sure: find him on Instagram. He is @ monoridez_euc

[@ItsBinhRepaired]

"I think Sherman wins" How about you switch riders? Wheels take some getting used to and figuring out their limits. The EXN wins because even without much riding experience on it, you were able to keep up/win.

[@BunnyslippersEUC]

Nah. Veteran has already proven experience riders, new to the Sherman, can cranck it fast. Micky isn't even trying and is definitely a conservative rider compared to other people. Sherman wins.

[@ItsBinhRepaired]

@@BunnyslippersEUC I have over 10k miles of riding experience between my wheels and I can tell you for a fact that the specific miles put on each wheel makes a huge difference. If I go to my old wheels, I'm a lot more hesitant pushing them because I didn't ride them as much and my experience limits how much I'm willing to push them.

[@evXNYC]

Rest assured we all have many miles on all these wheels. But if you don’t trust what i present, I might suggest a better YT channel for you to subscribe to.

[@ItsBinhRepaired]

@@evXNYC there aren't any other channels that did this test yet. Acceleration test should have a flat out winner. First test Sherman won by a landslide. Second test, EXN barely won. Third test Sherman barely won. It's not about trust, it's about the results not making sense and looking for a definite answer. This can be a big deciding factor on what wheel people decide to get.

[@evXNYC]

I understand your frustration but unfortunately nothing on my channel is intended to be exact or scientific. Especially since once we ride, it’s ALL about feeling. So for an exact measurement the manufacturers would be the best source of into. My channel proposition is: present the most entertaining & quality PEV content for beginners & enthusiasts.

[@theoadd5691]

Can you share the info for the repair shop?

[@evXNYC]

Yeah find Monoridez_euc on Instagram.

[@Its_saulbreh]

Ay man, you coming back?

[@longzero]

It's the what? The sound cut at the end :P

[@patrickmckowen2999]

Great review Another dry ride wheel. Cheers

[@senseivegan]

WICKED!! 🔥🔥🔥

[@TheRisco21]

Anyone know what he talking about Sherman cutting out under braking haven’t heard anything about that?

[@evXNYC]

The Sherman is geared to perform at high speeds. If you emergency stop below 20mph, it will cut out. You can brake at any speed but you cannot emergency brake under 20mph, you gotta take it easy. Sherman can do literally anything above 20mph. That is not the case with GotWay wheels as you’d need to take it easy at top end.

[@TheRisco21]

@@evXNYC thank for the reply also great video!

[@Roskellan]

flat cap and pipe ummm.... , what was missing was the baseball cap worn backwards (no I think you got that one), dark glasses come rain or shine and suitably strange footwear :-) Great video though - Gotway EXN too fast for me mind, I value my hide.

[@christodu62460]

Good for beginners?

[@TangDynasty1983]

Another awesome video! Can you share the discount code for ClarkPads? Thanks.

[@evXNYC]

It’s more of an affiliate link that gives me a kick back. But it’s in the video description.

[@widzer7778]

Does this wheel have cu-t off when going max speed?

[@Rocksaplenty]

All wheels do

[@pocho3881]

@@Rocksaplenty so they cut off and the. You fall off?

[@ferdinanddallasjr.5458]

can I sit while running

[@Jaka-vd9gf]

Would this not be better with a bigger wheel like the Z10 for 70km/h on Asphalt? thx 🤙🇦🇹✌ 6min. crazy fast lol 😅 9min. How fast was the jump? Seated must be hard and dangerous 🤭😅 I think after 5 years driving i would say 50km/h is enough with the Z10 straight but if you want go up a Hill it would be good to drive 60 or more...if you can handel it not for nooby's. ^^

[@JohnAngelnyc]

Now we all know you play role at home. Impressive acting. Instead of saying “should you get” you should say “let me help you be financially irresponsible”. I figure that would be better to say so no one can get triggered about what you think 👌🏼 great video.

[@JohnAngelnyc]

Chris clearly won, Chris is the best 💯

[@taimarmolder5444]

Why would you ever consider Dualtron or any scooter when you can have this?

[@pocho3881]

Safety

[@igorgoga7985]

Key word i need is safety safety safety

[@tedraymundo9283]

The Mickey Blinders.

[@Babyfasty]

Sorry you say that the exn is the most torqu-y wheel but at the beginning you say that Sherman is torquier

[@evXNYC]

Yep

[@Babyfasty]

@@evXNYC i guess ‘yep’ means EXN < Sherman. Quite surprised because 2800 watts motor compared to 2500 watts of the Sherman

[@evXNYC]

@@Babyfasty yes as we have learned here, cramming the biggest everything into a wheel does not maketh the best. The control board is 80% of the battle.

[@manuelsanudoguerreira7319]

Wait a minute... So over greasing the bearings and then reattaching the seal wouldn't solve the problem? What's that vacuum's issue all about? That wonder kid Chooch didn't report any trouble about it and by God that he drowned those bearings in Marine red stuff...!!

[@philopinas]

What can you say about gotway wheels exploding?

[@evXNYC]

Sounds like a bad day

[@andyl2991]

Have a drone follow you when racing 😃

[@wheelman6964]

Could have switched wheels for three more races...

[@ullle66]

i absolutly can NOT understand how anyone still can recommend a GW hollow motor AT ALL! These problems will not get fixed until Gotway will use some REALLY high tech Bearings! And Surprise...high tech bearings cost THAT much money EACH, that they probably never will end up in a GW wheel/motor.... Not that everyone has ONLY the risk of replacing the bearings after some miles ....when the water/rust gets further into the motor chamber, you need also about 4-5 hours cleaning/brushing the inside of the motor from rust. (i had the pleasure allready...) The hollow motors bearings are just way to near to the ouside of the rim, the surface which can catch water is to big etc etc....while small normal motor bearings never even get in the near of water.... But ok, thats just my opinion ...May be its a good summer wheel :-)

[@DamianLewd]

Pass

[@Jagosbullo]

There is another problem with hollow motors and it is even more serious than the poor quality of the bearings! Dozens and dozens of RS and EX wheels suffer from the "tock" problem ... a loud noise caused by the misalignment of the bearing assembly, housing and stator .... Nobody is talking about this problem, it happened to me and it is a extremely serious problem. This is a design flaw that can happen at any time, it happened to me after a few km but it could go up to 100 before it manifests itself. Gotway sent me a pair of bearings to solve the problem and this reveals their lack of knowledge of the problem. The bearings are not faulty but the aluminum housing and side covers are faulty, in short, a design flaw linked to non-respected tolerances and poor materials.

[@jayden56858]

i heard gotway cant even provide proper bearings right now smh

[@Jagosbullo]

@@jayden56858 the bearings are not the Tock causa as I already explained

[@SuperEagle421]

Looking a bit like Tom Hardy there.

[@jayden56858]

3k miles on my v1 monster woo!

[@ivanapetrovicpetkovic3638]

People in China manufactory watching EUC on youtube...hahahahaha

[@evXNYC]

Yeah- not happening, but funny to imagine.