Examination of Part Winding resistance of reciprocating compressor | RWTC

Let’s take a clamp meter and set the meter to measure resistance.
We will now measure resistance at 6 different points. The resistance value, if it is same across all the points, then the winding is ok.
Touch the lid on point one and three and note the reading. Then check point two and three, here also we are getting resistance same as earlier. Then put the lid on point one and two, here also we are getting same result. Now check 2nd winding. Touch the lid on point seven and nine, here also we are getting same resistance. Then check point eight and nine, we are getting same result. Then check point seven and eight, and the result is same.
Now check the resistance with compressor body. As you can see, we are getting no resistance show on all the points, so winding of this compressor is ok.
For more details, visit to our website: www.rwtcgroup....

[@Newland01Newland01]

Thanks

[@osolukoyaodunayo4307]

Good job

[@abhishekraveendran9478]

I have doubt 1 and 7 no beed to check resistance. Please upload detail vedios of parts winding. If change winding whats is procdure... Megaring vedio.. I am expecting.. Thanks

[@bluecoldrefrigeration4978]

Hello Abhishek, thank you for your valuable feedback, kindly contact us on [e-mail] to help you out with your technical requirements...

[@mansourghadhban236]

Thnxs more eng mansour