Excellway 4-24V ac/dc adjustable power adapter

Hi to all in this video you can se unboxing and review of
Excellway, model: HGJ1-1509T 4-24V adjustable dc power adapter.
It has range from 3.3V to 24V dc, max output current is 2.5A and eu plug.
You can use it like light dimmer or dc motor speed controller, so on...
You can buy it here:
www.banggood.com/custlink/v3v...
If you liked my video or learn something new support me:
www.paypal.me/zec23dark
Tnx for your time, if you like it hit thumbs up,
subscribe and share it.
See you soon...
Bye

[@50sorrowC]

Thanks for the review!

[@watchman835]

Bye to the days of having 1000 power adaptors. Thanks for Chinese ingenuity!

[@MACYNET323]

I would see it how works under heavy loads

[@RiskyR1CH]

Might be a silly question but what is the amp and watts at different voltages? Does that change as well?

[@zec23dark]

Hmm, i will try as soon as possible to test that, but now I don't have time to do that.

[@BeavistheLizard]

What would you run 24v with? I have two non variable power supplies here one does 30v the other 25v but I have no clue what to run on them

[@zec23dark]

Buy dc to dc step down module. Than you can use it from 25 to 5 volts...

[@jaiswalworld1321]

Can I use heavy load?Like Television and motor

[@user-ko5fv9of8o]

I've used similar one but the potentiometer was way too sensitive to my adjustment which makes it so hard to set the voltage accurately...how about yours?

[@zec23dark]

You can adjust the voltage by 0.2 volts accuracy.

[@sumertheory]

can i extend the wire for about 5 meters without heating issue?

[@zec23dark]

Yes, you can...

[@rhofelboado1092]

hi bro, it is possible to charge up my 4.8v jjrc battery?? even the voltage out put showing 5.5v?? or should I input excatly 4.8v?? what do you think?? appreciate for you response.

[@zec23dark]

Hi bro, yes you can. this is ni-cd battery 4 x 1.5 volts? if yes you can charge it up to 5.8 - 6 volts. but be careful that you don't over charge the battery.

[@rhofelboado1092]

@@zec23dark Yes 4x1.5, how about the time for charging? by the way I already ordered this thing too(Bangood) Appreciate alot for ur response.

[@zec23dark]

it depends on mah of battery, start with 30 min, check voltage on disconnected battery, then go another 30 min, check voltage and so on your goal is 6 volts.

[@Good-Enuff-Garage]

this is rad, but how or can you adjust the Amps?

[@zec23dark]

No, you can't...

[@itge13]

why would you want that?

[@Good-Enuff-Garage]

@@itge13 one adapter to test or use with multiple different electronics, you can set it to 19 volts and plug your laptop into it, or you can set it to 12 volts and use something else, or 24 volts and plug in a 24 volt light

[@itge13]

@@Good-Enuff-Garage yeah sure but you said you wanna also adjust amps?

[@karlsuarez5489]

Is it OK if 8hrs running?

[@zec23dark]

You can run it for 8 hours, just make sure it doesn't get hot. It is a very good power supply.

[@danishyousuf7665]

you did not show how it works on load.....empty voltage is okay....but when you attach any appliance , What is the performance?????

[@zec23dark]

In future i will make a video of power adapter and DL24P power tester.

[@eroshtik6997]

can using this charging drill battery?

[@zec23dark]

Hi Yes you can, but must set your voltage 0.4 volts lower than max voltage. If you have 3s battery max voltage is 12.6 volts then you set 12.2 v on charger display. What type is your drill battery?

[@eroshtik6997]

@@zec23dark 18v 1300mah battery

[@zec23dark]

@@eroshtik6997 li-ion or nicd battery?

[@eroshtik6997]

@@zec23dark li-ion battery

[@zec23dark]

@@eroshtik6997 you can the charged battery is 21v so yu need 20'6 volts...

[@AAA.23.23.]

Mariga be tyn

[@zec23dark]

english please...

[@Cycleround.]

Hello please help me i want this