Exercise 1: Complex Product Modelling in SOLIDWORKS 2018

[@stevegoodjob5902]

If you just explain what you are doing you will be #1 on YT Other than that it's simply AWESOME!

[@EasyCADSolutions]

Thanks 🙏, I will try my best

[@Remo2239]

Wow! I have never seen such mastery of Solidworks commands o youtube! You are really on another level!

[@EasyCADSolutions]

Thank you very much 🙏

[@alirezazakeri9338]

It was wonderful! I like practical content like this more than fantasy designs. thank you

[@EasyCADSolutions]

Thanks for the suggestion, will add more videos like this Thanks for watching 🙏🏼

[@tiilrndac5365]

What is the name of this model?

[@Guesswhokk]

Smoothly done with minimum effort. Both SW modelling and 3D design are elegantly done, he is a Pro. Nip picking here - though this short 'resultant' fillet edge 16:58 seem off ('zebra' should confirm that).

[@EasyCADSolutions]

Yes, Right the Fillet is a bit off here. You can use Curvature Continuous Face Fillet with Chord Width option. This will always gives you the better result than a normal fillet

[@reynavarro9466]

I did it! also, I just bought your bundle and I'm so ready to delve into it.

[@EasyCADSolutions]

Great 👍 And, Thanks 👍

[@girishshah8929]

Simplicity and elegance of form. Are you an industrial designer? Expecting few more tutorial videos of this kind.

[@EasyCADSolutions]

No, I am a Freelance CAD Designer Okay, I will try to make more Tutorial Videos like this Happy Modelling 🤗

[@beanmaan9991]

This is so helpful! Please share more video like this one. Looking forward to see more cad tutorials of some devices!

[@EasyCADSolutions]

Yes, i will make it for my future Videos And, thanks for watching 🙏🏼

[@christianboeve281]

Simple yet sophisticated 👌

[@EasyCADSolutions]

Thanks 🙏🙏

[@muhammadsaqib5420]

Nishant bhai bohat badhiya design kya hay app ne . Awesome

[@EasyCADSolutions]

Thank you Bhai Thank you ❤️❤️

[@muhammadsaqib5420]

@@EasyCADSolutions welcome bhai. Meray india maien kafi dost haien kafi saal pehlay maien ganay gata tha kishore da ke phir chodh diay ganay. KZbin per kafi ganay thay patta nahien kaisay apnay app remove ho gay aik aik ker kay. Mold making karta hon delcam per magar ab solidwork seekh raha hon abhi bignner hon . Umeed hay jaldi cover ker lon ga aap jaisay meray teacher haien youtuber . Duaon maien yaad rakhiay ga. Apna khayal rakhiay ga. Thnx

[@EasyCADSolutions]

Thanks a Lot 🙏🙏 I am also working on my upcoming videos on product designing

[@engineerrehman6821]

Any training tutorial to learn this beast ?

[@EasyCADSolutions]

Yes, Please contact me via WhatsApp [phone] or mail at [e-mail]

[@mbdanuj330]

Fantastic design and modelling you have good skills on solidworks but what the design called ?

[@EasyCADSolutions]

Thanks 👍 It's called product modelling

[@AhmedMohamed-yj3kt]

Great video may i know why you leave a gap 0.5 mm between each body is it for clearence ?

[@EasyCADSolutions]

Yes, it's a clearance for a visual look otherwise it will look like a solid body

[@rogerioeduardo2874]

Muito bom! Parabens ! Brasil!

[@faisalmalikfaisal143]

Your skills are next level. Thanks for sharing Buddy

[@EasyCADSolutions]

Thanks 🙏 And, Welcome 🤗

[@akifsaygin]

perfect tutorial thank you

[@EasyCADSolutions]

Welcome 🤗

[@gilangargyadyaksa3067]

Thank you for this great video, looking forward Solid Edge Tutorial

[@EasyCADSolutions]

Welcome 😇, I will try this in Solid Edge

[@advanceddigitalizationengi2875]

Nice 🙂👍 soildwork product development video

[@EasyCADSolutions]

Thanks 👍🙏

[@technov1king]

nice modelling, but why are is wall thicknes so light? its like 0.75 mm ... would that be enough for molding?

[@EasyCADSolutions]

Yes, It's too less for manufacturing I show this only for tutorial purpose

[@AliAhmed-gx4ix]

​@@EasyCADSolutions Please how can I change the thickness so that it is 1.5mm instead of 0.75mm

[@AliAhmed-gx4ix]

​@@EasyCADSolutionsI am waiting for your response

[@baykajiak2614]

SolidWorks is a universal language.

[@EasyCADSolutions]

Yes, it is

[@fahimnabeel606]

Wait how do you do freelancing can you give some tips? Do u freelance on Upwork?. What skill do you offer? I am also decent in solidworks and i wanna be able to earn as well

[@EasyCADSolutions]

Yes, I am a freelancer For more queries contact me via WhatsApp [phone] or mail me at [e-mail]

[@a.p.5004]

thank you so much for sharing your knowledge! :D

[@EasyCADSolutions]

Welcome 😇, And, thank you for watching 🙏🏼

[@marcosilva4257]

Que incrível!!!

[@EasyCADSolutions]

Thank you very much 🙏

[@MannuTandon]

please share more exercises of this type

[@EasyCADSolutions]

Yes, Sure Just Stay Tuned

[@jayhanumaan1]

U are the master I'm also want to do mastery in solidworks 😭 how much u take for this mastery

[@EasyCADSolutions]

Only Practice makes you master 👍

[@jayhanumaan1]

@@EasyCADSolutions so share more and more videos I want to become a master in that

[@EasyCADSolutions]

Yes, Sure

[@gwyn.]

Thank you CAD Jesus.

[@EasyCADSolutions]

Thank you too For watching my Tutorial videos 🙏🙏

[@krishnabinu4180]

Sir how will u adjust the casing thickness

[@EasyCADSolutions]

It depends upon the product manufacturing

[@AliAhmed-gx4ix]

​@EasyCADSolutions But how? I'm don't understand

[@muhammadtaimooradil6115]

Amazing Tutorial. I am having a little problem. At 12:51, Solidworks is not filleting the whole edges, when i manually select all, it gives error. What could be the problem? The problem is with the edges at one of the rounded corners

[@EasyCADSolutions]

Try to fillet the second loop seperately And, if not works then choose a smaller value of fillet Thanks for watching 🙏🏼 Happy Modelling 😊

[@weitrudolf851]

More Industrialdesign Videos 👍

[@EasyCADSolutions]

Sure, It would be soon

[@wragon4713]

How can I make trim surface like you in solidworks 2015? There's error in 3d sketch segment. Plz help me.

[@EasyCADSolutions]

Make sure that the swept surfaces must be completely closed, Otherwise it will not work And, if it doesn't work then try to follow the steps exactly in the same order as shown in the video

[@wragon4713]

@@EasyCADSolutions Thank you. I got it.

[@shubhahluwalia4054]

Hello, can you pls tell me how to give fillet at 12:51. When I select Edge 2 it shows rebuilding error.

[@derricknyamuhungu8152]

had the same problem

[@baykajiak2614]

Your kung fu is at a very high level!

[@EasyCADSolutions]

Thank you 🙏🙏 Learn and Grow

[@dineshkumarkanniyakumaran1328]

2D details of the modelling will be useful to think In advance

[@EasyCADSolutions]

Thanks for the suggestion 🙏 But I done this by taking random dimensions with the similar proportion of a box

[@dineshkumarkanniyakumaran1328]

Though your final 2d drawing dimensions of 3d model. Will help to think in ways to model in other methods.

[@EasyCADSolutions]

Okay, I will try to provide the 2d drawing as well

[@awanyuniawan1842]

Yo're amazing . Next can you make tutor making car please i,m support you channel 👍👍

[@EasyCADSolutions]

Not Next, But will be later because car modeling is not a simple thing. And, Thank you For Your Support ❤️🙏🙏

[@maykol161]

Hello, excellent video, how would you do so that each part is an independent document to make the mold of each one.

[@EasyCADSolutions]

Go to the Feature tree >> Solid Bodies expand it and right click on the bodies which you want to save and then click on save body/ bodies assign the name and its done👍, And, thanks for watching Happy Modelling 🤗

[@mohitjoc25]

Sir can you make your all tutorial similar vedios on creo

[@EasyCADSolutions]

I will try to do it Thanks for the suggestion 😊 Happy Modelling 🤗

[@mohitjoc25]

@@EasyCADSolutions you are great...btw from which country sir

[@EasyCADSolutions]

From India

[@mohitjoc25]

@@EasyCADSolutions really I never seen any Indian with this type of skill.....great ❤️🇮🇳

[@EasyCADSolutions]

Thanks 🙏🙏

[@ares0aoram]

sir im unable to knit the whole surface

[@EasyCADSolutions]

Follow every steps as shown in the video. or if it doesn't work then try again in new part file I hope it will work

[@michaelzajac5284]

Fortunately, I did not see that coming.

[@EasyCADSolutions]

I will make a tutorial on how i done rendering in Keyshot

[@michaelzajac5284]

@@EasyCADSolutions I have Solidworks Guide book.

[@EasyCADSolutions]

That's Nice

[@iniyavans5617]

@@EasyCADSolutions i would love to see that as i have created this model by following your video. Please try to include video tutorial as well.

[@siddharthss2243]

Drawing of the this whole product including GD&T please

[@EasyCADSolutions]

Actually it's just an approach- How to start modelling a real life products

[@zakariaebenkhaleq7981]

Rendering part !?

[@EasyCADSolutions]

It is rendered in Keyshot

[@zakariaebenkhaleq7981]

Okay. Where is the tutorial !

[@youtubemovies-topic9864]

Please speak English

[@eduardomunguia1873]

Crying in plastic mate

[@EasyCADSolutions]

Crying??