The design guides and files referenced in this video are now available for download, links in the video description.
@pureawesome01able7 ай бұрын
This is the best plastic injection SolidWorks tutorial I have ever seen. Good job!
@haroldjoubert78162 жыл бұрын
Very rare to find is guys like this speaking mold language, awesome knowledge
@SergeiZhuchkov6 ай бұрын
Thank you very much for sharing tutorial! It's exactly what I need right now and it's simplified a lot my task.
@miroslavm2553 Жыл бұрын
Very well presented. Congratulations! I hope your boss knows your value. I am quite familiar with the topic and it was a real joy to listen and watch to your smooth and valuable lesson.
@hawkridgesystems Жыл бұрын
We appreciate the feedback!
@bigdaddy7670 Жыл бұрын
A wealth of knowledge, thank you for taking the time to share.
@garmash.design4762 жыл бұрын
The revolve operation for simple curve tp create nice curved top surface is an eye opener for me, thanks!
@al-ibntasin2022 жыл бұрын
Very very impressive Experiencing live demonstration of practical solution.
@haroldjoubert78162 жыл бұрын
Excellent training for design intend which can be applied for mostly all plastic design, well done, thank you.
@LMY19942 жыл бұрын
Very thankful for this video ! I wish I found this video earlier.
@JeromeDemers Жыл бұрын
I followed this tutorial and immediately 3D printed the enclosure. Turn out great! I learn a lot! I wish it was higher resolution. Something odd with resolution and it's hard to read.
@ravikattakwal49603 жыл бұрын
Woah! Thank you very much for the video. Practical learning.
@harisshaikh89933 жыл бұрын
Thank you so much... Learned a lot from this... 🙏🙏
@dellpi39113 жыл бұрын
kzbin.info/www/bejne/f5LRmIt3eKuKapo.
@spirisoull2 жыл бұрын
veryyyyyy very useful video!!!!!!! thank you!
@peeros53 жыл бұрын
Thanks! Great video
@dellpi39113 жыл бұрын
kzbin.info/www/bejne/f5LRmIt3eKuKapo.
@abdullateefabdulazeez37032 жыл бұрын
What a great resource!!!
@blaso10002 жыл бұрын
Excelent video! Very useful!
@amalinabintimuhammadafifi55932 жыл бұрын
Thank you very much
@pawanraghav51783 жыл бұрын
Thanks a tonne!
@atifnaseer20552 жыл бұрын
Considering the feasibility in part ejection during molding, don't you think it would have been better to use drafted cut to remove excess material at the center of the top?
@cr47232 жыл бұрын
Excuse me, is there a video showing the surface modeling at 10:00?
@niranjanam32953 жыл бұрын
Thank you
@dellpi39113 жыл бұрын
kzbin.info/www/bejne/f5LRmIt3eKuKapo.
@alandeklerk2 жыл бұрын
Which package of Solidworks are the Lip + Groove and the Snap Hook options available on? I have the Premium Package and they are not available on my system
@hawkridgesystems2 жыл бұрын
It should be available in all packages. In this video its shown on a multibody part where it appears by default. If you're working in an assembly you won't see it by default, but it should show up if you edit one of your mating parts in-context within the assembly by clicking the Edit Part icon in Assembly with the part selected