The exile stuff is pretty interesting. They have a 3D printed muffler for the MS261, cool to see a company use that kind of tech for aftermarket saw parts.
@chrispaul132611 ай бұрын
Done full porting on my MS660 from XS, then added the original shotgun dual exhaust plate from Exile. Makes quite a difference in the big cuts. Haters will hate, but that's just how they are. Nice demo
@Kirks_Custom_Chainsaws11 ай бұрын
Very nice Boedy! It's always nice to see how each mod positively effects the performance of the saw. Keep up the great work man!
@novicelumberjack11 ай бұрын
Thanks 👍
@kylecromp31911 ай бұрын
You can take a punch and put it in through the muffler and knock that baffle outta there. Its easy and it comes out fairly clean. Its only spot welded. I dont much care for that exhaust because it points the wrong direction but to each there own. If it works it works.
@Tri-starsupplyllc11 ай бұрын
We have one that points the other direction, just out of stock on the G660, MS660 clutch side muffler cover.
@jameschause139011 ай бұрын
Love Exile parts sounds great on a 372 as well. Heavy duty dogs awesome stuff !!
@aaronpowell488511 ай бұрын
The good bolt-on's are always fun! Great looking parts👍🏻
@shawnglacken305511 ай бұрын
Cool parts. Wish mine was that easy.👍👍
@kennytheguitarfanatic05411 ай бұрын
That ms 660 runs pretty good. Before doing any more port work I would try a 8 or 9 pin sprocket on that saw.
@dubbssawshop11 ай бұрын
I absolutely hate the dang new stainless mufflers like on the 500i and 661. Makes them a joke unless you have a tig welder or just spray paint it. Great looking add ons tho 👍🏻
@crazyfeller570411 ай бұрын
👍👍 good runner!
@Doc-Cole_Trickle-of-Chainsaws11 ай бұрын
Morning Doug!
@scottfoster248711 ай бұрын
Only word of caution is use some doil tape under the muffler with the covers,they put alot of heat on the oil tank risjing the crank case gasket. Exile is the only copany thatoffs a muffler dront pointed corrrectly.
@jjm325411 ай бұрын
👍
@shawncaudill42411 ай бұрын
Yeah those dogs look pretty darn sweet
@nseric123311 ай бұрын
I put the little dwags off a smaller stihl on mine. I don’t fell trees with the saw so big dawgs are just in the way. I like the look of the muffler cover but also like having the exhaust outlet pointed at the chain so it doesn’t get the log im cutting hot
@Tri-starsupplyllc11 ай бұрын
Depending on the model, we have ones that face the opposite direction.
@ToddAdams123411 ай бұрын
@@Tri-starsupplyllchave you considered making a “Stihl-esk” type of muffler in a 2pc variety that would fit other saws, say a 372? Just a thought 🤔
@Tri-starsupplyllc11 ай бұрын
@toddadams9965 We are not the maker of them. We are a dealer for them. They do make a muffler for the 372. I just don't currently have them in. They are allot more money than just covers since they have to make the whole muffler. The manufacturer is working on making more for other models, which just takes time. They have to prototype, test, and then produce
@redtiller197511 ай бұрын
Looks good and sounds good. I might have to get one
@joec968011 ай бұрын
That muffler mod would look sweet anodized a different color. Get the dawgs done to match to 🤔.
@richarddodds932611 ай бұрын
They will burn more fuel under load in the cut with wide open exhaust and make more torque if it's a little rich which to me is better than more rpm. I have neotec 92.
@deej778311 ай бұрын
Very nice. Great video as always
@CHS_sufferer11 ай бұрын
Hey Boedy
@ToddAdams123411 ай бұрын
Boedy, will that ENTIRE muffler (both cover AND CYLINDER PIECE) bolt onto a 372?
@novicelumberjack11 ай бұрын
Nope. They do offer one for the 372, but it is quite expensive. I believe it is somewhere in the neighborhood of $160
So, how much does it cost to make your saw way noisey and your usable bar an inch shorter.
@tedneitzel11 ай бұрын
Nice!
@Witschor11 ай бұрын
Where are the uppers opening? I would build it this way . Let the Exaust where it is. Widen intake and exaust 25 thou sqish with 200psi Compression. Choose Bpmr8y Plug and 25 deg pre ingnition. Than check or optimise your uppers. Thats my way , do what you would do!
@amberwhite776111 ай бұрын
Send him one of your builds 2 put in a Wack-off and find out
@Witschor11 ай бұрын
@@amberwhite7761 to expensive from Germany
@johngraziano65911 ай бұрын
Can you make 1 for a sthile ms 390 saw, or direct me to someone that can build it.
@Super-Dave-Outdoors11 ай бұрын
Any decent local fabricator should be able to cut holes and weld pipes to a muffler. Just bring some pictures of what you want so you can show them.
@amberwhite776111 ай бұрын
🙋♀️Boedy
@Bags609Ай бұрын
Keeps calling it a Stihl and it’s not even a Stihl it’s Chinese junk clone my 066 would run circles on a fake Stihl