Exmark Lawnmower Deck Belt Replacement HOW TO (Best on YouTube)

[@aprilshowers2277]

I bought my Mustang 50 to replace my "almost: kzbin.infoUgkx1VWTrayKBdCKAjzAcZ_Eg4dhHTae3LkN also recommend worn out John Deere L120 (48" Cut - 20 HP Briggs). First off - I can now mow my almost 3 acres in about 1/2 the time it took with my other mower... I have had the Mustang 50 for almost 2 years now... Maintenance is easy - the Kohler Motor is "out in the open" and everything, except for the oil filter, is VERY easy to get to... To change the oil filter I have learned to fold the seat forward - no problem now... The deck is SUPER easy to drop... Rememb..

[@KReesethebeast]

Glad this video helped you

[@1awallace1]

I thought I had a belt problem, it turns out it was a pulley. As I was struggling to get the belt back on, I remembered your video. You were very helpful. Thanks And as for those hater's in the comment section, try to ignore them, there are a lot of envious people who troll.

[@KReesethebeast]

Great to hear! I am glad this helped you I tried to be as detailed and as real world as possible. As for the haters, I know they are out there and I feel bad for them because their life must be miserable. I don't let them bother me though, just feel bad for them. They do not have anything better or more productive to do with their time than troll people's videos who are taking their time to help others and leave hate and negativity. Poor souls. Take care!

[@aprilspearsstrange1332]

Thank you! After going through multiple videos your video made sense to me. Not just men putting on belts. With your help this badassmom just put a belt on our exmark 😅

[@KReesethebeast]

Glad it helped!

[@47chrystal]

yup! going to try this!

[@lostpinefarms]

thank you for the video you saved me a few busted knuckles 😅

[@djsgravely]

You saved me a LOT of trouble when I needed to put the belt back on my mower. Thank you. Exmark was no help at all.

[@KReesethebeast]

I'm glad this helped you out that was my goal!

[@BHnNC]

Thank you! Been doing this wrong for years, no wonder it took a hour and a half, lol. Thankful now!

[@KReesethebeast]

Glad this helped you out!

[@alantaylor2208]

Your video was the only one that a guy could see the layout of the belt good job thank you.

[@KReesethebeast]

Glad this helped you I did my best!

[@markstewart6234]

Thanks for the vid! Helped me out in a bind. I used a block of wood to keep the spring open to release the tension on the belt.

[@KReesethebeast]

Great tip!

[@khalidflynn5548]

dont know if you guys gives a damn but if you guys are bored like me during the covid times you can watch all of the latest movies and series on instaflixxer. I've been streaming with my girlfriend lately xD

[@alonsocanaan8764]

@Khalid Flynn yup, I've been watching on InstaFlixxer for months myself :)

[@cashwill7119]

@Khalid Flynn Definitely, been watching on instaflixxer for since december myself :D

[@jasperjoseph872]

@Khalid Flynn yup, I have been using InstaFlixxer for since december myself :D

[@donhoward5354]

Thank you brother. Saved me a trip to repair center!

[@KReesethebeast]

Awesome!

[@gamatoutsikos]

Thank you Mine is an exmark but different model. Wasn't able to lift the floor so I took the deck off the brackets.your video still helped!

[@KReesethebeast]

You're welcome!

[@vaughnwesterby5162]

You could use the 1/2” hole on the idler arm to take the tension off the spring with a 1/2” breaker bar, it would be much easier and safer to install the belt. 👍🏻

[@KReesethebeast]

Good tip!

[@shoehorny6844]

Great video! You helped me to figure out how to get that tough belt on. Thanks!

[@KReesethebeast]

Glad it helped!

[@MarshallMorgan-51]

Yes, you can roll it on like this, strain to pull it and squash your fingers, or you can simply use the provided hole for a 1/2" drive pull bar in the tensioner bracket. Use leverage to take the tension off the belt and just drop it on.

[@KReesethebeast]

It's always easier said than done my friend.

[@jameswiggins5867]

My belt just jumped off as I engaged the PTO. I have less than 100 hours on a Lexmark Radius. It concerns me that the belt came off. There was a loud clunk when it jumped off. I could not turn the drive pulley and assume that is because you would be turning the engine to do that. In your video I think you mentioned that you could turn the drive pulley. In any regards I would like to thank you very much for an outstanding video.

[@KReesethebeast]

Hope you got it figured out, glad you liked my video.

[@michaelthompson7570]

Timely,,my belt snapped today after mowing. Had just one little spot to do. As kicked in the pto nuttin happened. Need to check all the idlers,spindles,tensioners for bad bearings first!

[@KReesethebeast]

Hope this helped you out!

[@anthonylelli3901]

The tensioner pull through location is what we needed. Next machine won't take a hour of head scratches.

[@KReesethebeast]

Glad this helped you!

[@peteywheatstraw9846]

Brother thanks for this great video. I saved time and my knuckles

[@KReesethebeast]

awesome to hear

[@bltefft]

When you pull the yellow button to engage the blades, are you at a fast idle or a low idle? And is it best for the deck to be at the desired cutting height or all the way up?

[@KReesethebeast]

Exmark recommends to engage and disengage PTO at half throttle. It is best to do it with deck up so you are not in thick grass trying to get it going.

[@robcandis3228]

It worked! Your instructions were spot on; thanks!

[@KReesethebeast]

Great to hear!

[@scotthuffman4909]

Very informative. Thanks for taking the time to make this useful video.

[@KReesethebeast]

You're very welcome!

[@LarryGreen-wo1cw]

Instead of pulling the tensioner by hand, atleast in some models they provide a square hole on the arm of the tensioner that fits a ratchet so you can privet the pulley that way.

[@KReesethebeast]

I good information to have!

[@winkingfox7125]

Awesome video got it on no problem thank you sir!

[@KReesethebeast]

No problem 👍

[@daledorman6659]

If the belt hoes on with a slight twist in it, how do you fix that? Do you have to take the belt off? If so how do you get the belt off? Or can you get the twist out without taking the belt off? Thanks.

[@KReesethebeast]

It ought to straighten out when you engage it and fall into the pulleys and ride the right way

[@loshaivanov1991]

This helped out a lot bro thank you so much

[@KReesethebeast]

No problem

[@PapaGsAdventures]

Thank you! Boy you're right about the gloves!

[@KReesethebeast]

Absolutely!

[@APACHAONE]

Thanks dude. It was very helpful 🙂

[@KReesethebeast]

You got it bro 💪

[@nonamebrand8771]

Just about any Exmark does not cover my 50 Quest. Any videos on the Quest drive belt? P.S. Could you make a wooden wedge to handle the tension spring?

[@KReesethebeast]

Hmm, not sure about that model. I could see a wedge helping for sure.

[@rickregen1060]

Thanks. That really helped me

[@KReesethebeast]

YW

[@paulhomza3134]

Ok I'm going out to try and put that new deck belt on........

[@KReesethebeast]

You got it!

[@cchang7074]

Are you using an aftermarket belt? If so, what's a good source for them?

[@KReesethebeast]

It is an OEM belt, very expensive. I bought it from a local dealer that sells mowers and stuff.

[@vikwillwin]

@@KReesethebeast paid 130 including tax today for factory belt ,have used aftermarket with some success for parts for toys in Michigan about 1/3 the price .

[@KReesethebeast]

@@vikwillwin nice, I just figured pay once for a good one and get it done and not have to worry about it.

[@johnhill9910]

@@KReesethebeast I have 120 hrs on a 2021 e series 52 mulch kit my belt has 2 cuts like that. Is that normal I thought belts good for atleast 200-300 hrs not little over 100 and I clean everything daily.

[@aaronrust274]

Great job Thanks for the help!

[@KReesethebeast]

You bet!

[@jamiebryson3826]

Thank you 🙌

[@KReesethebeast]

Welcome 🙏

[@stevefryman1698]

Awesome video. Thanks.

[@KReesethebeast]

Glad you liked it!

[@Codeman113]

anyone know how to get belt on over side of tension pulley? it can’t go over or under

[@KReesethebeast]

Watch the video closely bro

[@Codeman113]

@@KReesethebeast yaaaa i looked at my mower and was wow that’s the essayist way i’ve ever done🤣🤣 i was doing it wrong all along

[@allanfarr]

My deck has 6 wheels on the deck. I figured this out eventually. Almost identical instructions but my 6 wheel is a bit different than 5 wheels. I had to loosen the bolts attaching the tensioner wheel. I only put one part of the belt through the tensioner connection. Then around wheel at back of mower and returned to other end of the deck.

[@bigj6405]

Thanks a lot's yes!

[@aronsantos9966]

Thank yes put in

[@KReesethebeast]

Good.

[@mrguppy1016]

Lol good work out 💪🏼

[@KReesethebeast]

It was for sure!

[@1kloo]

What size belt?

[@KReesethebeast]

The size in this video

[@tommyrichmond1293]

I thank you for this. But I’m still got something not rite

[@jamesm3334]

You said you were gonna turn your blades on and you didn't do it cause you could still see the pulleys are not turning at the end thank you

[@KReesethebeast]

I may have forgotten to show that, but I can tell you, several summers later, and she is still cutting fine.

[@lenardmayfield5351]

This is helpful

[@KReesethebeast]

thnx

[@lenardmayfield5351]

@@KReesethebeast my pleasure One day I'll do it myself

[@jaimejay6056]

I just pull the whole tension pulley back and simply put the belt on. Instead of just pulling on the belt

[@KReesethebeast]

More than one way to skin a cat as they say

[@eduardobenitez8325]

Grasias me ayudo mucho Muy bien para un principiante

[@KReesethebeast]

You're welcome.

[@wdilks]

Nice

[@KReesethebeast]

Thanks!

[@Ken-tp2eo]

You never showed the deck belt engaged when you had the engine on 🤦🏻‍♂️

[@KReesethebeast]

If there was an issue I would have shown it. Tried to keep vid short as possible.

[@aronsantos9966]

I doing. You. Have. Video replaced drive bet 😊

[@KReesethebeast]

great

[@DavidGrassSr]

I have to laugh, you had to pull your ass off to get on hua.we got it, flat side on the flat pulley and the V-groove in the V-pulleys ? Watch those fingers, going to get me a pair of thise gloves, See Ya Texas

[@KReesethebeast]

It was tough and I would wear gloves for sure!

[@ryanknuth6915]

Dude no one gives a shit about the 5 dollar gloves

[@KReesethebeast]

Some people might never know, plus they get a discount so there is that.

[@cindytestman4701]

Jjj

[@KReesethebeast]

Ok

[@hgerrard2745]

This is a job where you wish you had a third hand

[@KReesethebeast]

Exactly