Hobbywing 12s Max4 with 560kv in the DBXLE! EPIC FIRST DRIVE!! Poor servo…

[@nmrc7778]

Thanks to you buddy I just pre-ordered mine today for my Losi 5T I love how smooth that system is looking forward to it when it comes in

[@dualtrondreamteam6811]

Any issues with the max4 1 yr on

[@jasonhughes3587]

Man you wasted no time getting this done! Looks like a solid performer, certainly has me looking forward to the 12s video, thanks for sharing

[@kennethgomez4315]

I'm so glad I just watched this video! I have a team Corelli punisher which runs hobbywing rebranded motors and ESC and I've had problems lately with my trigger on my remote and I couldn't figure out how to calibrate the ESC and now you showed me thank you so much

[@alexanders-life]

Your commentary and general excitement is contagious! Love it!

[@ExocagedRC]

Glad you enjoy it!

[@jasonmcclatchey9749]

Just met him this weekend at beat the creek he's a awesome guy an everyone that was at the event best time ever

[@dkmgm2011]

I ran the motor/esc specs through three different calculators. If Hobbywing didn't inflate their numbers this combo should produce a 28hp @ 300 amps @ 50v. That would be wild, but here's where it gets crazy. If peak current is actually 2000 amps, @ 50v that's roughly 180hp, depending on efficiency. Mind-blowing. 🤯

[@jeremybreeden4228]

That's more hp than my daily Honda Civic 😂

[@BaNZFall]

@brainbah gotta use thicker ones

[@QuinnsRC]

Awesome! Couldn't wait to see this motor/esc combo in a big rc! You didn't say anything about it being sensored, but that first slow, smooth, non-cogging pull was butter.

[@hammerT2997]

Holy hell Joe!!!! That is bad ass man!!!! Don't know how I missed this video, start my daily get ready for work routine watching your vids, 5am daily lol. Good stuff man!!!!

[@Daywalker_Lee]

Nice setup!

[@skeletorrc2583]

Man that was just impressive. Looking forward too seeing what the future of this Monster and the awesome builds you and others will have too show.

[@Noneyurbusiness]

*BEAST*

[@georgem.6136]

I’m sure you know someone with a mill, just mill out the chassis for motor clearance so it looks nice & gives you what room you need. Probably better than raising the entire drivetrain. Can’t wait to see how fast it is on 12s, will be crazy fast!

[@UAERCADDICTS]

nice vid man cannot wait to see the 12s run :)

[@VS666]

damn that thing rips! I have a xmaxx and a db pro so I can't see myself getting one of these but I'm a huge fan

[@AlvaFPV]

I wanted more I will get more. Love the attitude and the optimism you’re one of my favorites!

[@nadersedaghat5694]

Good luck on the warranty.

[@robertb.4202]

Those looks perfect for the Raminator.

[@lesdmess845]

Spectacular a launch as I've seen!

[@3SonsRC]

I don't think you overgeared at all brother. More punch for sure and you could easily go 34 or 36 but dont think you need to. What a beast brother, I just can't imagine how much $$ you have in this rig, gotta be over 3k at this point. I live losi but there $$ a bit more. Appreciate ya

[@stephanez8036]

thank you ! at least someone understand low KV and ratios !

[@GreatLakesRC]

Insane! 😱 I can't believe the motor actually fit without more modifications. Pretty crazy performance 👍

[@ahwayzcool4630]

Holy shyt! That motor and esc is HUGE!

[@juanmarichal263]

Wowwwwww, love this DBXLE with the crazy big combo.

[@KiloWattRC]

Motor design is out of this world

[@codnamerich]

Awesome! As far as I know, the castle 800kv is rated for 12s. It would be interesting to see how the castle motor does on 12s in the real world. You would definitely get more rpms vs the 560kv.

[@scottdaubenspeck2291]

Awesome stuff Joe. Can't wait for castle to release a monster like that

[@jaywol7813]

Beautiful bud, pretty sure i saw 25t on that pinion but either way its a screamer....again love the channel

[@michaelvankirk3576]

I've been waiting for the install and running of this 👍💯👊

[@gerardosoler8935]

Awesome video that combo is a Beast 🤩💪💪💪

[@MrFredshb]

Bro the track looks awesome. I'd love to check it out. And that max4 combo😱😱😱😱. Awesome videos

[@danieldaniels4168]

THAT IS INCREDIBLE !!! I need this combo for my 5ive T. I have the Max5 in it at 8S and its a beast with it but 12S will be a whole new experience

[@old-rcplane-phart]

Joe will go for a backflip, wfo, & the buggy will go into the multiverse! Lmao! 😜

[@rcchallenge8626]

Glad to finally see you coving those jumps, going to save a lot of work on maintenance now 👊🏼 can’t wait to see the Max4 rip on 12s eventually 😎

[@reapersrcperformance8835]

Man this video was awesome 👌 I really learned alot ,thanks man !!!

[@ExocagedRC]

Glad you enjoyed it!

[@Gamova91]

What a beast ahaahhaaha, crazy powah!!1

[@tkostang]

That thing jumps like it’s tethered to the ground…. Stiffer springs help I guess but it seems like you need more suspension travel and a higher CST shock fluid. That nose dive made me cringe. Props to the losi for not taking a dirt nap after that. Nice video

[@jessewilliamson2408]

Man you had that thing flying!! i just set my dbxl up with a xlx2 combo. now you make me want to rip it all back out! lol awesome video Joe keep up the hard work. I always look forward for the daily uploads

[@alphaplus4162]

Be careful it doesn't catch fire, i sold my xlx2 because of that fear.

[@FRANKIEGBANGEMS]

I added the 18 tooth pinion to my dbxl. 1st the pinion was wearing, replaced motor mount with vitavon, fixed problem. Then I bought belted tires, they came unglued 3 out of 4 glued them back, fixed. Installed beast 2000 works great. Now stock esc is sending hot capacitors 5 green lights. Guess I need to spend another 500 bucks and get the xlx2 setup. The 18 tooth pinion is one expensive upgrade.

[@RoosterRC]

What a MONSTER

[@NathanStorer-RC]

Dude, that thing is sick!

[@boccatxrx5023]

nice work Exo, thanks for sharing brother🤙🏽 Are you sure though that the pinion is 30t? it has 25t written on it... keen as to see what tyres will be able to handle the 12s!!

[@PigglyWigglyDeluxe]

Definitely 25t if you freeze frame and count the teeth you’ll count 25t

[@grimripper7524]

Who makes the 25t pinion gear for the DBXL-E?

[@jamesplymire5342]

😆

[@dougburrell3450]

Yesyesyesyesuesyesyes please!!! I'm counting my money now, car payment or max4 for dbxle2🤔 I do need to start exercising anyway.🤫 dont tell the wife

[@stlrc330ft7]

Enjoyed your video, great information.

[@kimdra9321]

WoooW very nice amigo 🤟🏽😎🤟🏽

[@baileyflanagan3081]

You should take a torch and a shovel or something heat up the ends of the pipes and flatten them so you don’t smack them a full speed

[@hyperflowfans]

That thing is so sick granted mine does not have as many upgrades as yours but that 12s combo, the money is burning a hole in my pocket!

[@ImThatGhostz]

Ahh i just noticed the Florida RC Outlet sticker. Those guys are great and one of the best shops ive been to.

[@ExocagedRC]

Yes they are!

[@Blueknight1960]

I think I'm finally to the point where I'm going to get the max 4 and motor. I'm tired of the xlx2 and leopard motor overheating, just a short 10 min run will get things so hot you can't touch them. The gears are not binding because it roles freely. I have good fans on motor and esc. The only draw back is the price of getting the hobbywing kit and 6S batteries.

[@RaddestDad]

This is the RC I want. I like the size.

[@MannyGunzz]

Wow that's MAH HOOSIV😳 BIGASS beer can..

[@chrismagallanes8858]

Awe hell nah 👍💯 already putting it to use

[@randall4411]

I could see the RC madness in your eyes ! And that shit eating grin 😁

[@eddieepicmedia]

I bought one and just realized i'll have to send it back because of the 600kv limit on 12S. oh well , guess i'll get an MGM. THANKS for the video.

[@truthisweareallgonnadie.]

Explain what do you mean? I have a Losi dbxl-e 2.0 can you explain the problem? What are you trying to out it in? A MGM Esc and motor will cost as much as 3 combos of the hobbywing tho🤔

[@eddieepicmedia]

hello there. That was a while ago. I ended up getting the Hobbywing Max4 with a castle 800kv. goto my channel and I show my setup.@@truthisweareallgonnadie.

[@cd-pu5uv]

I think they limit you to a low kv motor to save the esc, some people wanna run 12s and a higher kv for racing or speed runs ​@@truthisweareallgonnadie.

[@armandopace6113]

Mate that's a beast now. On 12s it's going to be a insane animal good luck mate 👍🤣🤣. I don't know about putting that in a X maxx it will fold it self in half 🦘🤣🤣🤣🤣🤣

[@jonlewis758]

I’m digging the 12s system I might have to get one for my xmaxx

[@gazza9014]

just discovered your channel and subbed great video dude.

[@ExocagedRC]

Thanks!

[@JUMBOs-RC]

Wowzers

[@Reecefpv]

That thing is awesome. Looks like the perfect upgrade for my 1/5th scale kraton lol.

[@thercog]

Nice that’s going to be my next rc

[@bbibbobba]

O~my god!!! Metal dbxl~e 12s power

[@Wild_Buggy]

Nice Frankenstein you built there 👍

[@iaqmaster]

Damn that is sweet!

[@joshchatwin8569]

I just want the max4 and I m going to use my 800kv motor and only run on 8s in my kraton exb 1/5

[@RobertCarrizal]

Hey @EXOCAGEDRC HOW WAS YOUR LOSI IS DOING!? BUT WHAT'S HAPPENED YOUR SERVO ARE KILLING OVERVOLTAGE!!!

[@onemansvideos2134]

Fingers crossed a updated version of the max5 and max6 get released after seeing this and seeing the new max8 that is now a 160amp esc

[@ModifiedMercedes]

Wow I love it🔥🔥👈🏾

[@gregory9157]

It runs like a champion 👍. Any ideas if the drivetrain will keep up with 12s ?

[@lnskustoms6795]

Great job. Seams it has a bit more room as we where talking with the vitavon chassis and motor mount then the stock chassis. Going to be a beast on 12s. Just ran my kraton8s on 12s this morning quick will be doing a video this weekend on it.

[@lexsteel12]

So, you can in fact fit that ESC and motor into a Kraton 8S? I was thinking of picking these max4 motor combo. But, how is the clearance for that motor? Did you have to mount it up? Thanks.

[@lnskustoms6795]

@@lexsteel12 I am running a 58113 Leppard motor and a beast pro 300a esc in the kraton 8s.

[@phillymetalhead]

@@lnskustoms6795 What Kv Leopard are you running?

[@lnskustoms6795]

@@phillymetalhead 530kv.

[@phillymetalhead]

@@lnskustoms6795 Thanks.

[@MidwestVillain_Z]

Jesssusssss I can't even imagine what 12s is gonna do

[@danielbargas3377]

It’s awesome and I love seeing it mounted up but almost seems like a little too much motor for the dbxle. The 800kv 2028 with the max4 on 12s wold seem perfect

[@jake4194]

I think thats the point lol

[@clairecooper3848]

I believe the Max4 can only run motors up to 600kv .

[@garretm.9772]

@@clairecooper3848 that is if they are 70120 size, it should have no problem running an 800kv 56 size motor.

[@edweingartner8840]

Definitely rethinking my xlx2 and 1100 kv setup i have now for 12s thanks bro wife's not.gonna be happy lol

[@jonthomas8487]

I love Hobbywing stuff. They all run so efficiently. What I’ve heard the difference is between Hobbywing and Castle is that Castle doesn’t have the internal safeguards like Hobbywing so theoretically if they make a 12S system it may end up pushing more power but it won’t be as dependable as a Hobbywing. I think for me I’d rather have a dependable rig than a $3000 build go up in flames

[@jasonengland2357]

Me too, have HW in all my cars and no issues with any of them. Love their programming, much easier to do and the motors are quiet.

[@old-rcplane-phart]

Ideally, that same system SHOULD fit/work in the rampage! Should. But finding or making the direct drive setup will be the issue. Maybe holler at Medic, owner of 'RC Sparks'. He has a ton of connections. 👍😁

[@restinpiecesrc5528]

For a rampage check out steel city rc or i think Mega RC, if i recall correctly steel city has a center diff and motor mount setup in his rampage

[@Mr.NiceGuy80]

Raz Shifrin just introduced HIS OWN branded servo. It's 1/5 I believe. Looks amazing.

[@MichaelPipes101]

You sound like an evil doctor with that laugh while updating the esc!

[@rcbustanut2057]

Whooaah, that's one huge freaking motor!! 😳..... Hmmmm, I could probably use that system for my kids power wheels 🤔😂

[@cwatson42785]

Man I got the max5 in my dbxle and the thing is a beast, I can't imagine with this.

[@Hirthirthirt]

I hate to subscribe.....but you are such a lunatic...I had to :D You spend a lot of money to keep the channel busy. I thank you for that and subscribed now. And now - i watch that, for sure amazing, video :)

[@joshchatwin8569]

If I could like this video 1000 times I would

[@powersmodelgarage]

Wow, you win the go big or go home challenge 😀

[@MrRunsWthSizors]

Looks like the pinion hangs just a little off the end of the shaft. Has lateral force caused the pinion to come loose at all? Just feeling a few more mm on the motor shaft length could help... To nit pick 🤣

[@ericniestedt304]

can't wait to see it on the Big kraton.......

[@ExocagedRC]

I heard there was a "Flip" Kit to fit the larger motors in them, I haven't seen one of those yet

[@Cwimpee84]

Beast

[@thomaslane7576]

My steering servo on my dbxl went out to I can’t wait to run 12 s get that air control

[@Captinfun101]

That makes the xlx2 look like a tenth scale motor 😂what a beast . Wonder if they will fit into the kraton/outcast 1/5th . Nice job .

[@ExocagedRC]

😂😂 I’m sure we will see these in the Kraton somehow

[@sakisSAVAGER]

Too much power 🔋 💪 😍

[@onemansvideos2134]

You should give the 5th scale hobbystar servo a try I've got one in my xmaxx and in my baja 5b and I really like it

[@joshchatwin8569]

That’s awesome with some decent fans on motor temps will be under 100 easy I’m guessing but that’s only on 8s so it’s not pushing it temps will go up when you run 12s get some fans on motor for when you run 12s great stuff brother keep it up

[@garretm.9772]

If he gears down a bit once he goes to 12s temps should stay low. He is pulling more amps only running 8s, not allowing the motor to rev out.

[@chuck-y1z]

Would you recommend the 12s 800kv or 12s 560 Hobbywing with that weight I have a similar setup and I'm running an 1100kv castle creation on 8s SMC's that doesn't seem to have the proper power.

[@gary6190]

I need this in my life

[@ernazhuzan3328]

I Wanted more... I Will get more... Love'it 😂 💯

[@arrmatuff_traxxasrocks_rc1097]

Question, those Hex's you have on it are those 24mm? They look like there 24mm extenders and if so where did you get them and would you have any idea if they would fit a losi super rock Rey?

[@ExocagedRC]

Those are made by Vitavon

[@arrmatuff_traxxasrocks_rc1097]

@@ExocagedRC OK, Thanks bud. My son and I really enjoy your videos 👍🤘🤙

[@alankowalski8781]

I wouldn’t turn the punch up before you go 12s. Once you go 12s that may be to much punch. You probably only have a day or two until the other 6s battery comes in. You should be able to run a taller pinion too.

[@thejeepinrealtor5742]

I’m running the same esc/motor and pinion. The esc has started re initializing itself. Which of course causes loss of throttle and brake while going! Dangerous. Not it won’t move at all. Starts up. Steering works. Pull throttle. Esc off. Steering still works. Esc restarts. PLEASE HELP! 😂

[@ChiefRickyRC]

Well done! Gosh that'd be a fun buggy to have I wish I had one. I love the bigger ESC and Motor, always! Is yours the most powerful in the world now? Jw lol

[@josediaz6246]

Temperature guns aren't accurate on reflective surface so be careful were pointing it might not be getting good reading but awesome video 👏

[@captaincoolziy2319]

Now dats whats for dinner yo

[@RTmadnesstoo]

Why does your '30 tooth pinion gear' say 25T on it? I see from the comments I'm not the first to notice. Did you do a follow up video? I'm missing it.

[@pfunk72]

Hey my friend can you please do a video on what u use to raise that transmission and how u did it I have one and I don't want to get rid of it thanks

[@user-tt9xt7gs2b]

It's a 25T pinion isn't it? Also, will the vitavon ESC mount acomodate the Max 4?

[@fangrc3404]

Cool👍🏻

[@jakefifelski3851]

I’d like to see some GPS speed and bashing comparisons between the HW Max4 combo on 12S and the Max4 with a 2028 800kV on 12S.

[@ExocagedRC]

oh I will, the current setup is way softer than the castle but I gotta turn the punch up, its smoother than the castle though which is crazy to say.

[@jakefifelski3851]

Awesome! Keep up the great content. We all know how much you put forth for this channel! Much appreciated.

[@AbbyRCToys]

Which one should I go for between X-maxx vs Losi 2.0 DBXLE? My requirement is should be fun and speedy and durable

[@southsidehobbiesrc8433]

Great work man, I’m really interested in the motor mount that you used is there a particular link possibly to get one ?