Expert Crane Factory - Production

[@pengshengforging1118]

Well organized workshop, and production procedures.

[@TheRebelOne.]

Excellent video. The cranes are beautifully fabricated.

[@marka5478]

I worked for overhead crane builder Stanspec for 6 years in the former G. C. Kuhlman complex off of E. 140th St.

[@4n2earth22]

Awesome! Great to see USA MFG.

[@AlvessSavio]

Awesome work guys... Does anyone has the detail of the diaphragm welding?

[@Orgakoyd]

Imagine if they had someone else's crane installed in their own factory! I saw a vise factory tour where they were using another manufacturer's vise on a few of their own factory machines!

[@ucvu7774]

Công ty ở đâu vậy bạn, mình rất muốn được làm Công việc này

[@pawelbajda5750]

Its funnt if you think about the fact that cranes help build new cranes, or smaller cranes help set the bigger once up(putting heavy pices into place). But how was the first crane ever built if there were no other cranes to help built it.🤔

[@phillhuddleston9445]

Muscle!

[@phillhuddleston9445]

@Larry Riffett If the illegal kind count America is set.

[@phillhuddleston9445]

@Larry Riffett Yes but I guess you missed that I was joking as well.

[@roballen2639]

Great video.

[@brucewinningham4959]

How many companies out there are building Overhead & Gantry Cranes in the US? I gather there must be quiet a few. Which overhead crane manufacturer would you all consider building the best with the most trouble free operation? We may be in the market to purchase one for our small operation. So I am doing my preliminary homework. THANK YOU EVERYONE for your input.

[@alvmech]

And where are the workers' helmets?...

[@Unknown_Ooh]

I don't think a helmet is going to do much if one of those beams falls.

[@rupert557]

do you need welders?

[@gulabk65]

Very good and the job

[@Martuszewski]

JLG, GROVE, Manitowoc, Ingersoll Rand, etc...all same build tons on them then lay off crew for 6 months. Crane Care, is like saying have back up job.

[@brucewinningham4959]

Does Ingersoll Rand build overhead cranes? I knew at one time they were building about everything but some of their productss & properties have been sold off to other manufacturers just like Atlas Copco acquired the "Drilling Solutions" division, the manufacturer of Drilling Rig's and other related equipment.

[@sagarjoshi9923]

Hii sar my father is a great weldar & febricetar hi is weld in 29 years india so any job for you

[@FluidTekPH]

professional manufacturer

[@مرتضییزدانی-ل1ط]

Very good

[@brunoperlotti1269]

Ottimo lavoro.

[@TheVinn3h]

........... The algorithm is too good.... been watching welding videos because i wanna learn... Today i was thinking 'how do they weld cranes' then this is my rec videos :s they are listening i tell you LISTENING!!!!!!

[@Loshka_kartoshka_0]

kzbin.info/www/bejne/qXycfKZ6qKenhrc Watch at 0:32

[@syedhabib8718]

It is excelent!!!!!!! could you pls show me the short clip of KBK type Monorail with Hoist Capacity 2000Kg for Longitudional Travel of 30 mtrs and vertical movement of Hook 10 mtrs only.

[@karelkrygr487]

jo to byly zlatý časy když jsem je taky skládal a svařoval

[@PolipastosPuentesGruaIngeval]

Excelente !

[@attecrane]

Need to upgrade box girder process. Better use hydraulic for assembly

[@AnalogBuddy]

hoists look exactly similar to our CXT range

[@Bolwoj100]

Because it's Alfa-brand )

[@attecrane]

Belong to KCI group

[@СашСавар-ф5д]

Красиво делают! Я бы поработал на таком производстве!

[@pikapi4035]

Я работал на производстве подъемных кранов в РФ, и как это ни удивительно, наше производство было более технологично, чем это. Честно говоря я немало удивлен, что американцы собирают главные балки вручную с рулеткой без стапелей-порталов, боковые пояса они варят по месту вручную, продольные швы тоже вручную, когда сварочный трактор стоит копейки, и шов делает качественный. Но цех у них чистый, это да.

[@СашСавар-ф5д]

@@pikapi4035 Не ну здесь все зависит от контроля после сборки, а так да ты прав. Но я бы поработал там, и деньги не маленькие платят!

[@pikapi4035]

@@СашСавар-ф5д Местные на английском пишут, что когда заказов нет полгода без денег сидят, если я правильно понял

[@СашСавар-ф5д]

@@pikapi4035 Ну да же если они три месяца работают в году, они больше наших получают раз в пять!

[@carlossilva-pb6vr]

The company seems to be very professional, i have no doubts about the Expert Crane´s quality, however, would be great to see the workers wearing/using proper equipments for individual protection instead beisebol caps and regular glasses.

[@johnewing8066]

carlos silva o

[@chrisyboy666]

carlos silvan

[@chrisyboy666]

carlos silva called bump caps and he has got safety glasses on

[@tomthompson7400]

@@chrisyboy666 dont be a fool , tinted goggles are not suitable for welding.

[@buildthings79]

@@tomthompson7400 Maybe not welding all the time but there are shade 5,6,7 and 8 tinted glasses ment for plasma cutting and tack welding. If you just tack with them and dont stare directly at the light then they work fine (and no you really dont need to look at the light after you have experience to tack). I own a welding shop and have many shaded glasses and even auto darkening glasses that work like a helmet that go to shade 12. If you do it for too long then you get a sun burn but your eyes are fine.

[@rohitrana9392]

Konecrane ❤

[@菠蘿菠蘿-q3k]

admire amrican brother i love amrican seaside

[@deniscanalescanales8415]

Me gusta la tecnología

[@younessbenjilali2694]

Salut .Je suis ferones marocain j'ai sper de travailler avec vous

[@razaullah4338]

Ticnition mobile no any body have Ple elictrical

[@Jk-eo3tp]

😍👍

[@howellmiller428]

Very poor PPE safety practices. First welder wearing clear glasses to tack weld and no hearing protection. OSHA nightmare.

[@Migman2020]

They be crucified if this was in the uk.. All welders have to wear air fed helmets now lol

[@sidneyoreilly1135]

The safety parasites are sending your jobs to China