Explained and Reviewed: Powerdyne Arius Hacks!

[@littlebigplanet17]

I never thought I'd find a video more informative than an actual review. I am beyond thankful for this content! Especially since you're doing so much more than selling product to an audience. This channel NEEDS more recognition.

[@rollerskateuniverse6763]

@@littlebigplanet17 thank you I appreciate it

[@CH1-777]

Great information, and well presented. Can I suggest you improve your camera work. Your picture only displays on about ( 1/9th ) 11 percent of the screen and is very hard to see, especially the smaller parts you are talking about.

[@rollerskateuniverse6763]

Thank you

[@ukfieldninja8730]

Also can use graphite from a pencil, graphite is a "solid" lubricant on the parts/areas which will wear down by friction and can't use a liquid lubricant on.

[@rollerskateuniverse6763]

@@ukfieldninja8730 genius idea

[@ukfieldninja8730]

@rollerskateuniverse6763 I've been using my platinum plates a lot and there are some scuffs from the delrin but no "edge" has formed. Can't get those shims but the graphite seems to be doing the trick 👍👊

[@bobayekadabogeyman9819]

Whats the website for the Auris parts please?

[@rollerskateuniverse6763]

@@bobayekadabogeyman9819 Marshall Mort on FACEBOOK

[@Jazor50]

I just want to adopt your skills from this video 👏🏾 great video.

[@kjwilliamson4750]

So I have an size 11 edea boot with size 7 Arius plate not mounted yet. Would my plate be to small for my boot? Before I got my Arius plate, I was skating on a cheap nylon plate size 7 and skated on them just fine. I had little to no knowlege about my actual plate size measurement but skating on a size 7 plate has done me well. I’m almost 3 years in and just now upgrading to a better plate!

[@rollerskateuniverse6763]

As long as the wheelbase on the new one is relatively close to what you're running now, there shouldn't be any issues!

[@ukfieldninja8730]

If ya watching this and can't get those shims... same effect can be achieved using a thin PTFE sheet and cutting out little discs the same diameter as the axis pin sleeve. Ptfe sheet costs like.. $2 for more that you'd even need

[@racharina]

what is the difference between all the butterfly colors? Right now, mine have the yellow butterflies and they are soft; however, they seem to make my skates not to pivot. I want them to pivot more, what color should I use?

[@louisefournier5022]

Hi can you put the link up for the seller of theses trucks pls? Thanks!

[@rollerskateuniverse6763]

He's on Facebook, his name is Marshall Mort

[@deefootwork_]

Can’t find his Facebook? What is it?

[@rollerskateuniverse6763]

Check out the page "arius skate plates and cushion trading"

[@jasondank8653]

your really helpful just like marshal

[@shauncarpenter2054]

So a already expensive plate has to have loads of money thrown at it to fix all of it's problems, i think I'll stick to roll-line

[@JohnTewell-yh2se]

You bought these used for sure.... New ones come in a custom box with all the tools and extra cousions...

[@rollerskateuniverse6763]

I bought nothing , these were sent to demo the aftermarket parts on them, and then they were sent back to the owner

[@AdowTatep]

Im sorry man but why did you put a horizontal video, in vertical, with these blurs on the top/bottom. Instead of just making a normal youtube horizontal video. We're on youtube not tiktok. The actual video is taking 10% of the screen size, and your video is _already_ filmed horizontally. So why don't just put it like normal

[@rollerskateuniverse6763]

@AdowTatep I appreciate it, learning the stuff about making videos isn't exactly my forte versus knowing the equipment... Fortunately, I have learned how to film the stuff correctly as of late, thanks for watching!

[@michaels5166]

and you have skills...

[@turner7928]

Dude, get a pocketknife