EXPLAINED | Which UltraSwing will fit your rig?

[@barbarafuhrman7395]

Thank you for your answer I wNt a swing out like this so good to no

[@rigdsupply6945]

Let us know if you have any other questions 🤙

[@rubenmagdaleno5515]

I like the idea I have a 2014 tundra and I’m actually looking into the idea of how to mount my spare. Looking forward to this mount.

[@rigdsupply6945]

Right on 👍 The Mega-Fit will be the way to go www.rigdsupply.com/products/rigd-ultraswing-hitch-carrier-mega-fit

[@RoboRoofer]

Awesome products! Wish this company would make a swing for high clearance bumpers

[@rigdsupply6945]

We do! It’s our RambleSwing www.rigdsupply.com/products/rambleswing?_pos=1&_psq=rambleswing&_ss=e&_v=1.0

[@nipsy_lafett]

Have you thought about doing a double swing that would put the tire off center and maybe gas cans on the opposite side? I want one but I don’t want to cover up the camera on my f150 or relocate my license plate

[@rigdsupply6945]

Thanks for the comment. A dual swing would get quite heavy, and you'd still need to relocate your camera and license plate.

[@WASOON]

I am receiving a 2020 Jeep Trail Hawk shortly. I do not foresee the need of this spare tire option, but like the ease of function in swing arm and the ready-to-go without much construction aspect of your design. I need to carry my Trek Hybrid Road/Street (D-5?) bike. Is this limited to 1 bike only? What can you tell me about which unit will fulfill my need?

[@mikeselsor1793]

I want to use one on my RV but I have a swing away on the passenger side for a BBQ grill, do you make one that swings towards the driver's side?

[@rigdsupply6945]

Hey Mike, thanks for asking. We don't make a driver side swing because we really aren't fans of swinging tires and bikes into traffic.

[@donnawaddell1955]

Will it hold a 41 inch Goodyear mounted on a 20 inch Hutchinson aluminum wheel total weight around 250 pounds?

[@michaelfrymus]

I didn't think you could put that much weight on that hitch on my 4th gen 4Runner. I get it would be okay for towing a lot of weight, but putting a tire like that? That's great! Now I don't need to buy a whole bumper and swing outs.

[@rigdsupply6945]

Right on! Let us know if you have any other questions.

[@clintchapman4319]

No rear camera relocation fixtures for 2019 f 150's?

[@rigdsupply6945]

Here's one that should work: camerasource.com/f150-plug-play-camper-camera-kit-mini-universal-cam.html

[@roberts3889]

Still no love for the 200 series Land Cruiser (2019)?

[@rigdsupply6945]

Man, I wish we could, it's such a unique fitment.

[@TheKkkeeennnnnnyyy]

How about a 4th Gen Ram 1500, I have a 2017 w/ 6" lift and 35's that needs one of these real bad.

[@rigdsupply6945]

Absolutely, the Mega-Fit is the one to get for your 1500 www.rigdsupply.com/products/rigd-ultraswing-hitch-carrier-mega-fit

[@ponyboy481]

I have a 2008 2500hd silverado what one would work best for my truck

[@rigdsupply6945]

Mega-Fit with 8-lug wheel plate 👍 www.rigdsupply.com/products/rigd-ultraswing-hitch-carrier-mega-fit

[@minhster714]

Just watched the video on Jason Koertge's channel and it was mentioned how the system could be run without a spare and still be used for a bike carrier and other accessories. Would you be able to run the rotopax mounts facing the rear of the vehicle (where the spare tire would normally be) and still be able to run the table on the inside? A set up like that would be ideal for me just to carry extra fuel and have a table when I need it and remove the whole unit for daily use.

[@rigdsupply6945]

Awesome! That's exactly the setup we had in mind when we designed the UltraSwing. You can run fuel on the tire side and a camp table on the other side...AND carry your bikes.

[@thunderdan9382]

Which one would fit best on a Silverado 1500? I need to mount a 33" tire. Also it would be nice to get some rotopax fuel cans on their and a hi-lift jack. Is that also possible with accessories that you sell?

[@rigdsupply6945]

For full-size trucks like Silverado the Mega-Fit is the best option. Yes, we have a Rotopax mount and a Hi-Liuft jack mount for the Mega-Fit as well. www.rigdsupply.com/products/rigd-ultraswing-hitch-carrier-mega-fit

[@valmoremartinez4572]

This tire carrier work for my 2020 Jeep Gladiator and can I order. Thank you

[@rigdsupply6945]

Yes, for 35" tires or smaller, we recommend the Multi-Fit. www.rigdsupply.com/products/rigd-ultraswing-hitch-carrier-multi-fit for 37" or up to 40", we recommend the Mega-Fit version www.rigdsupply.com/products/rigd-ultraswing-hitch-carrier-mega-fit

[@rawleyhutcherson3005]

Does the multi fit work with the bronco sport?

[@rigdsupply6945]

Yes, it will work great!

[@kayingyang6252]

I need a 2005 tacoma

[@darbyalvarado30]

i have a 2017 Toyota tundra and haven't found anything for it like this. the one i have ran me $2,300 but it's with a steel bumper. i also have an 08 ford f1-50 but they don't have have any parts for it on their site. do you have this for it!?

[@rigdsupply6945]

Our UltraSwing Mega-Fit will work great on the F-150 👍 www.rigdsupply.com/products/rigd-ultraswing-hitch-carrier-mega-fit

[@robertmalone2825]

which size would I need for my 1993 f-150? I only have 31/10/50 sized tires mounted on 15 inch wheels on my on my truck.

[@rigdsupply6945]

Hey Robert, even with just a 31, I'd recommend the Mega-Fit for your 93 F 150

[@barrydeglow8112]

How about the rear camera for the the Tacoma? Does it affect the view?

[@rigdsupply6945]

You'll want to use our relocation kit, www.rigdsupply.com/products/tailgate-camera-relocation-kit-tacoma-tundra

[@marknoyes9611]

Could you use this on a side by side atv. 30 in tire

[@brandonkwong3353]

Will the multifit work for 2022 tesla model y?

[@rigdsupply6945]

Yes! If you go on our Instagram feed you can see a Multi-Fit on a Tesla, it will fit all Tesla models.

[@peterschlange1832]

I have a 3rd gen 1997 4runner. Which ultra swing should i get?

[@rigdsupply6945]

Shoot us a photo to [e-mail] but the Short-Fit has been working pretty well on a lot of the 3rd gen hitches. The Multi-Fit would also work.

[@peterschlange1832]

@@rigdsupply6945 ok thanks. The multi fit was also recommended by your guide on your website.

[@reggierespicio1177]

On the universal ultra swing. Do you have something in a high clearance to bring it up a bit for a forester that has a hitch on the bottom of the bumper?

[@rigdsupply6945]

Our Multi-Fit we recommend for the Forester is kicked up to improve departure angle and is in-line with the bottom portion of the bumper.

[@meineliebste]

@@rigdsupply6945 I know this sound redundant, can this fit 2008 Honda CRV? do you have an authorized installer around Tacoma, WA?

[@rigdsupply6945]

@@meineliebste www.rigdsupply.com/products/rigd-ultraswing-hitch-carrier-multi-fit We just ship direct. Please send a photo of your hitch to [e-mail] to confirm your hitch is good to go

[@jeromeburrasca6710]

Will this work on a 2011 Suburban with 35” tires on 20x10” Wheel -19 offset?

[@rigdsupply6945]

The Mega-Fit will work great. There's a chance you may need to purchase a wheel spacer for those rims which could be purchased at any local auto parts store, but yes, other than that you are good to go 👍

[@CalebCissna]

Have you considered making GX470/GX460/4Runner V8 specific version?

[@rigdsupply6945]

There's no need to make a specific GX or V8 4th Gen version because the Multi-Fit fits great for those applications. Those vehicles were very high on the priority list of fitments we wanted to address well when designing the Multi-Fit. www.rigdsupply.com/products/rigd-ultraswing-hitch-carrier-multi-fit

[@ilovecandy303]

@@rigdsupply6945 All of the designs seem to open to the passenger side. Is there a reason why there is not one that opens up to the driver side? My Lexus GX460 door opens to the passenger side. A driver side version would be nice for a tailgate party.

[@rigdsupply6945]

@@ilovecandy303 We don't make a left swing because we aren't fans of swinging a tire and potentially bikes into traffic. I totally understand the temptation for wanting that on your rig, but until we have some major distribution in Australia its unlikely we'll be making it.

[@BX0207]

Nissan Xterra 2007 2nd Gen fitment??

[@rigdsupply6945]

www.rigdsupply.com/products/rigd-ultraswing-hitch-carrier-multi-fit

[@JohnSmith-vp6jh]

The loaded diaper look on a Tundra is sad with the "megafit". Just begging to be ripped apart mounted blow the bumper level...Will a multfit work? How high can the tire be mounted on a multifit?

[@smorris6891]

Great video. I will be calling and ordering one for my 5th gen 4runner in a few weeks. Do they all come with wheel mounting plates

[@rigdsupply6945]

Awesome! You’ll select “with wheel plate” when you order on our site 👍 Let is know if you need anything else

[@smorris6891]

RIGd Supply dos it cost more with wheel plate. Also I’ll be getting the camera kit and table

[@rigdsupply6945]

smorris6891 the standard is with wheel plate and it’s $1100.

[@jessecadena9485]

@@rigdsupply6945 where is your company located at whzr state ......??????

[@dailodai9586]

1997 toyota tacoma first generation. would the universal swing work?

[@rigdsupply6945]

This is the one you'll want www.rigdsupply.com/products/rigd-ultraswing-hitch-carrier-multi-fit

[@RoyalOceanRWB]

Will the 5th gen 4Runner ultraswing fit my v8 4th gen?

[@rigdsupply6945]

Not without changing out your hitch. However, the Multi-Fit version will work perfectly. www.rigdsupply.com/products/rigd-ultraswing-multi-fit-spare-tire-hitch-carrier

[@r.p.8402]

Hey guys. These look fantastic! Need to get the spare off of the bottom of my truck. Which of these would you recommend for a ‘21 ZR2 overlanding rig on 33s?

[@rigdsupply6945]

The Multi-Fit will be ideal for a ZR2 👍 www.rigdsupply.com/products/rigd-ultraswing-hitch-carrier-multi-fit

[@muajilong]

Any issues with using the backup camera on a Tacoma?

[@rigdsupply6945]

The backup camera will be blocked, but not to worry, we have a relocation kit: www.rigdsupply.com/collections/backup-camera-relocation/products/toyota-backup-camera-relocation-kit

[@muajilong]

@@rigdsupply6945 lol what if I already have an anytime camera installed for the front that I added? Any issues?

[@rigdsupply6945]

@@muajilong It can be done, I'd recommend ordering direct from Anytime Camera to get the right connections so nothing is redundant.

[@Amarillobymorning777]

I got 2001 WJ : will fit the multi fit??

[@rigdsupply6945]

Yes 👍

[@AndyPanoncillo]

I have a 2023 promaster that I recently converted to an RV. I installed an aftermarket trailer hitch and planning to install your product to mount a spare tire, and to hook my 5x12 all aluminum enclosed trailer as well. So for my applications, it’ll be the megafit right? Does it comes with spare tire adaptor too?

[@rigdsupply6945]

Hey Andy, yes. That'll be the Mega-Fit and you'll select the multi-fit wheel plate. Let us know if you need anything else.

[@AndyPanoncillo]

@@rigdsupply6945 it’ll definitely be on my van for sure. Just need to prioritize things I need to complete the project. Need some door screens then going for the megafit ultraswing

[@juanarmendariz9943]

Hi, I was seen if you make one for a 2000 mitsubishi montero ls sport? Thanks!

[@barrydeglow8112]

how do you use the rear camera on the tacoma with this on?

[@cannonanderson8292]

I have a v8 4th gen, but i’m unsure if the 4runner specific will fit. because i don’t know if it has the factory mounted trailer hitch

[@Nonthanburi2]

What setup do you have that will fit a CURT 13702 hitch receiver, mounted on a 1996 Chevy ambulance? Originally I was just going to use the receiver for bicycles, but still need a way to carry an 8-hole spare. Can I also get the table with this setup too? Cost? Thank you!

[@nohelliachico2206]

Would any of these fit 2007 honda element?

[@rigdsupply6945]

www.rigdsupply.com/products/rigd-ultraswing-hitch-carrier-multi-fit Shoot us some photos of your hitch to [e-mail] to make sure everything is 100% good to go

[@nohelliachico2206]

I will ones i install one!

[@toku58]

Wow! I just checked the price?! That's Insane!!! Is it made of Platinum???

[@rigdsupply6945]

Thanks for the comment. The UltraSwing is made of steel. Platinum wouldn't hold up very well.

[@jakeslagle504]

What about a Nissan frontier??

[@rigdsupply6945]

Absolutely, the Multi-Fit will work great www.rigdsupply.com/products/rigd-ultraswing-hitch-carrier-multi-fit

[@VinnieVan]

I would like this on my lifted Toyota Sienna Mini Camper Van. Which one would work> The multi I would imagine?

[@rigdsupply6945]

The Multi-Fit is probably the best fitment for a Sienna, shoot us a photo of your hitch to [e-mail] to make sure there are no fitment issues.

[@VinnieVan]

@@rigdsupply6945 i haven’t installed one yet but that is next. 2 inch receiver or?

[@rigdsupply6945]

@@VinnieVan Yes, 2" receiver.

[@JohnYukishiroObata]

Lexus lx470? would it have to be the mega-fit?

[@rigdsupply6945]

Yes, Mega is a good option, but reach out to [e-mail] with the year of your LX. Newer years can have some fitment issues

[@82toinfinity]

Which application would work for a 16 gx 460?

[@ianallen617]

Will this work with my Nissan Frontier?

[@BenzaReels]

Would any of this tire carrier work on Lexus GX460?

[@rigdsupply6945]

Yes, 2 out of our 3 versions will fit. This is the one we recommend: www.rigdsupply.com/products/rigd-ultraswing-hitch-carrier-multi-fit

[@Keashane]

Can it work with Tesla Model Y?

[@rigdsupply6945]

We have a special version that works on Model Y and Rivian. Send us an email to [e-mail] and we can get you set up.

[@KhmerAdventures]

Hi, which one will fit my 2008 Lexus GX470 ?

[@rigdsupply6945]

Multi-Fit 👍 www.rigdsupply.com/products/rigd-ultraswing-hitch-carrier-multi-fit

[@JoeTirone]

Which version offers the best fitment for the 4th Gen 4Runner with the V8 Hitch? The V8 has a different hitch than the V6. By best fit, I mean lines up with the pin and sticks out the least?

[@rigdsupply6945]

The Multi-Fit is great on the V8 hitch, and that's the only option you have. To run the 4Runner UltraSwing you'd need to replace your hitch with the v6 (and all 5th Gen) hitch.

[@tariqmajid3985]

Were can buy one from

[@rigdsupply6945]

www.rigdsupply.com/collections/ultraswing

[@erniegarcia4724]

Do any of those fit on a 3rd gen 4runner? If it does, how much$?

[@kenli3835]

Will multi fit model fit on a 18 tundra?

[@rigdsupply6945]

Absolutely 👍

[@mannysoto8399]

With so many Tacomas, why don't you make a Tacoma specific UltraSwing?

[@sandman503]

Lol he literally just explained that

[@rigdsupply6945]

We actually pretty much did when we designed the Multi-Fit, it just happens to fit into a bunch of other vehicles as well.

[@user-pv9cf4fr6d]

Running a 2008 FJ Cruiser with 37” tires + 6 inch lift. Which version is best fit if I want less gaps/closer to rear door. Could you provide estimate distance of gap.

[@rigdsupply6945]

The Multi-Fit is the correct version for you. The distance will be about 8-9" on an FJ. That's partly because the rear door on the FJ is really flat and recessed from the bumper. On vehicles like a 3rd Gen Tacoma where the tailgate bulges out a bit that distance is 7".

[@user-pv9cf4fr6d]

RIGd Supply RIGd Supply With the multi-fit version, would there be an issue: 1. 37x12.5 tire blocking the 2nd hitch for bikes? 2. Blocking my stock sensors on a stock bumper? Is it low enough? Ideally would like to keep my stock bumper sensors, would the megafit solve this issue without having the Ultraswing going past the width of my bumper? Is it same distance away from rear door (~8 inch) as multi-fit? Hoping this version drops low enough that it doesnt block sensor.

[@hugogutierrez5279]

I have a NISSAN NP300 NAVARA

[@maginoooverland9895]

I’m thinking of getting a multi fit for my 2013 Landcruiser, coz i’m not ready yet for a bumper mods, will this unit work? Thanks

[@rigdsupply6945]

Please send a photo of your hitch, but in many cases, unfortunately, no, we can't accommodate the 200 Series LC.

[@jakepaddyfield4767]

I am going to order one to fit my spare tire and 2 Rotopax 2gallon, how about mounting the Multifit to a 5th Gen 4Runner? thank you

[@rigdsupply6945]

The Multi-Fit will work on a 4Runner, but will stick out further than the 4Runner specific version by a couple inches.

[@jakepaddyfield4767]

@@rigdsupply6945 stick out in width, or rearward because of the longer hitch? How many inches? Thanks Edit: How long is your current turn around time? Thanks again

[@rigdsupply6945]

@@jakepaddyfield4767 Sticks out rearward 1" or so because of the extra hole position in the hitch.

[@416Expedition]

I have a 2007 GMC Yukon and my family and I are very active with trips and overlanding. We also have a boat that we tow around. What version do you think would work for my truck?

[@rigdsupply6945]

For a Yukon we'd recommend the Mega-Fit. www.rigdsupply.com/products/rigd-ultraswing-hitch-carrier-mega-fit

[@deadbrainn]

Which ultra swing fit the Subaru Ascent?

[@rigdsupply6945]

Multi-Fit is the way to go for a Subaru Ascent www.rigdsupply.com/products/rigd-ultraswing-hitch-carrier-multi-fit

[@leegriffin5495]

Mega fit Will work best for me .I got a Nissan NV 3500 passenger van . What is the price on the mega fit ? Can you text me back on price one and a phone to Reach you.

[@rigdsupply6945]

Here you go: www.rigdsupply.com/products/rigd-ultraswing-hitch-carrier-mega-fit

[@pclutch]

On your site it says the mega was specifically designed for specific vans and other large van applications. I dont have a van, i have a ram 1500 so I bought the multifit, it doesn't fit. Tailgate hits the plate and my 35 won't allow full swing. I ordered the mega. You should reword your descriptions because im stuck with a $1200 chunk of steel and no box. I guess if the mega doesn't fit I could order the 4runner version and then live in the box cuz now I broke

[@ryanevans604]

Where are you I was about to order that

[@pclutch]

@@ryanevans604 20 min from NYC

[@HadwinMotorFreight]

Will this fit a 2021 Trailblazer? If so, I'll buy. lol

[@rigdsupply6945]

Shoot us a photo of your vehicle's hitch to confirm, but out Multi-Fit should work great. www.rigdsupply.com/products/rigd-ultraswing-hitch-carrier-multi-fit

[@senderoverland]

Would any of these fit a 1st gen sequoia?

[@rigdsupply6945]

Yep, Mega-Fit 👍 www.rigdsupply.com/products/rigd-ultraswing-hitch-carrier-mega-fit

[@Terruhcutta]

I want this for my powerwagon sooo bad 🤣

[@rigdsupply6945]

Terruhcutta Mega-Fit is definitely the call for the Powerwagon 👍 We’re ready when you are

[@Terruhcutta]

@@rigdsupply6945 Thanks for the insight! Follow up question...will the swing + tire clear a camper shell lift gate? 🤔

[@demontaegearing7753]

Will fit 2004 tacoma?

[@rigdsupply6945]

www.rigdsupply.com/products/rigd-ultraswing-hitch-carrier-multi-fit

[@BandarOtayf]

Do you ship it internationally?

[@rigdsupply6945]

We can, reach out to [e-mail]

[@ryanevans604]

Will this fit a 2020 gmc 3500

[@rigdsupply6945]

Yes, this is the one you'll want: www.rigdsupply.com/products/rigd-ultraswing-hitch-carrier-mega-fit

[@tomchong2851]

can this fix on hilux 2018?

[@rigdsupply6945]

Yes, www.rigdsupply.com/products/rigd-ultraswing-hitch-carrier-multi-fit

[@barbarafuhrman7395]

Jeeps 2????? Or just Toyota thanks

[@rigdsupply6945]

Pretty much every vehicle with a 2" hitch 👍 so yes, Jeeps too

[@michaelgreene5201]

Would any of these fit on a 2018 Grand Cherokee Trailhawk?

[@rigdsupply6945]

www.rigdsupply.com/products/rigd-ultraswing-hitch-carrier-multi-fit

[@pclutch]

There's so much flex on the mega with a 35" that it makes driving exhausting and annoying.

[@darbyalvarado30]

ME: Hello...do you have a hitch mounted wheel carrier for a 2016 toyota tundra!? custom shop: nah only for tacomas me: dammit ok. i'll keep searching ME: 3 years later Hello. do you have a hitch mounted wheel Carrier for a 2020 ford f-150 Raptor!? Custom shop: No...but hey we have one for your tundra now!!!! me: goes home...orders bike rack

[@rigdsupply6945]

We make one for all of the above, but for a Tundra definitely the Mega-Fit www.rigdsupply.com/products/rigd-ultraswing-hitch-carrier-mega-fit

[@billystray7007]

ECONOLINE ?

[@rigdsupply6945]

Absolutely. You'll want to use our Mega-Fit for an Econoline

[@MonkeySpecs301]

why are these still so overpriced?

[@rigdsupply6945]

Material prices have increased up to 400% this past year. We haven't passed any of those increases on to our customers when most all other manufacturers of steel components have.

[@travelingczar1704]

How about the rear camera for the the Tacoma? Does it affect the view?

[@6point1hemi]

If I get a 5gen hitch for my GX470, can I use the 5th Gen version? Will the handle clear the bumper?

[@rigdsupply6945]

Your GX door will slam into the latch location on the 4Runner. Get the Multi-Fit and you can utilize it on both rigs 👍