Extreme Router Table Build | How To Woodworking

[@seanfyodorovich5230]

Izzy makes freehanding the router for those hinges look easy but that's only because he's the boss.

I was half watching while web surfing and then when it all came together realized I needed to rewatch the entire video again. Great job

[@SteveSmith-px3sy]

This is what we need, straight to the point. A total lack of Bull. Off to look at your other projects. Thank you.

[@timthomas9105]

I've watched a lot of your videos. Just bought the Triton router. Looking at ideas to put it in the table saw. So I can use it with the fence I ordered. This is it. Don't have to look anymore. You are a Craftsman. Watched an earlier video about your drill operated drill press lift. Already ordered the cams and chain. I've been disabled for 10 years. So anything that makes it easier, gets my vote. Thank you very much. Tim.

[@davidjackson9036]

who in the world put thumbs down on this, this is awesome. I wish I had a garage I could build all this stuff in.

[@robking5896]

Hello Mr. Swan. You are not like other makers. You design your own things and not just repeat what everyone else does. I also enjoy Jeremy Fielding for the same reason. I can't imagine what the two of you could come up with. Would you ever consider doing a collaboration with him? Thanks! Rob

[@ramboiyer123]

You make it appear so easy, You surely are God's gift to woodworking. Terrific idea

[@xianshengxu998]

Your operation is so amazing that ordinary people can't learn it.

[@redmanmathura4806]

Wow you do all that with wood that's so amazing

[@warrencolegrove1]

This guy is the most creative and innovative person I have seen on you tube. I love his work! Go Izzy !!

[@triplealley]

Izzy, so many props! I am circling back around to this video a year later just to comment. I've seen a bunch of these KZbin builds and I've always hated the guys who are concerned with the fence being parallel to the table edges. Then you came along and confirmed how dumb that is. You rock!

[@joegarrison8611]

Gotta tell ya, that is exactly what I have been seeking. With a drop in plate you can swap out router for planer and have your own joiner. Heck you could even mount a plate to drop in a 7.5 in skillsaw or even an upside down jigsaw if you so choose. Three thumbs up Izzy. Thanks for the inspiration.

[@TheSteveAS]

Frikin’ AWESOME Izzy! What CAN’T you make with a couple sheets of plywood!?! I know there is a lot of engineering baked into this design, but you make it look so effortless!

[@imakeaustralia5744]

love the coloured finish on the top

[@JosephCenter]

This is EXACTLY the rig I've been looking for to solve a recurring accuracy problem I deal with in my own drum-building projects, so THANK YOU!

[@dennisfarr6579]

Love the pivot fence idea.

[@YuraKvadrat132]

Izzy Your creativity knows no bounds.

[@twoweary]

The uses for this thing are endless !

[@superchile9640]

Glad I saw this again. I meant to build one and it just refreshed my memory

[@RT1200BIKER]

Triffic! Ingenious project. Love watching your vids!

[@andrewford80]

You have the kind of creativity that sets your stuff apart from a lot of other woodworkers. I love this idea.

[@brightnuertey1451]

Izzy this is the type of router I want perfect and better . Keep it up thank very much.

[@alexdave7551]

You are the Best! My respect from Ukraine!

[@Tradekraft]

You are an admirable engineer. If you were to know me, I don't admire many engineers. Thank you for your brilliance.

[@izzyswan]

Thank you for the kind comment

[@Catillia85]

Izzy, you're my hero. You're skills are absolutely amazing. As a self taught woodworker, I feel so lucky to be able to learn from your videos. Thank you!

[@threeque]

This guy has the same table saw I have. Smart man.

[@rf-bh3fh]

Routers rock. I put my table router right in my table saw . This way I can use all my attachments of the saw for my router. Works great. I can move big pieces thru it. So cool 😎.

[@samborhodes473]

Udaman, Izzy. I just threw together a get-me-by router table based on one of your old videos and I used the single point swivel with a clamp on the other end. It got me out of a bind, but now I see this little bit of awesomeness. You keep raising the bar, and I thank you for doing so.

[@bluesky6327]

This is fantastic. Absolutely fantastic.

[@kingyfpv4787]

I was looking at getting a table but this is WAY better than anything I was going to get so I'm going to make this... keep up the good work 👏 👍

[@TimberlyDesign]

Holy crap! From all of the custom builds that I've seen, this one is the most practical, creative, and enticing. Thank you for sharing.

[@GrizzlyWisdom]

This is the izzy shaper. Coming soon to a box store near the middle of nowhere soon!!

[@johnpereira547]

Izzy, you are proof positive that it's the man, not the tools, that make great work. Thank you

[@emgb1]

This has to be the best router table I've ever seen. That is seriously clever, honestly.

[@juanmanuelvielacaudevilla911]

Izzy, eres de los buenos, un maestro haciendo maquinas buenas para la madera, y un talento haciendo cosas, te doy un sobresaliente y matricula de honor.

[@stefanschuler8861]

WoW...most inovativ Routertable I ever seen! Awesome handwork! Wahnsinnig gute Idee und super umgesetzt!

[@beardedpenguin3795]

This... Is... AWESOME!!!

[@born2tx]

Your videos are masterpieces! As a newbie to wood working I enjoy your information.

[@colinblankenship2401]

Great table. Thanks for sharing.

[@JohnMadeit]

I had no idea where you was going with this at the beginning of the video. But I was right in believing that it would be awesome

[@andredionne7769]

NICE ROUTER TABLE GOOD JOB

[@MrLemaner]

very nice the id of the pivot fence is extra you are genious guy!

[@JaredMize9]

I think I checked my phone 50 times today waiting for you to post this. Amazing. And I absolutely agree with the hinging fence. I hate having to fiddle with each side while trying to get it exact.

[@shanehertzog5812]

Excellent work,great woodworker.

[@scyarch1136]

Wow. I’m sold man. As soon as I saw what you did for the bevel with the straight fluted bit- like for making cabinet door panels, I knew our massive router table my father and I built is going back to the drawing table to see about adding this functionality. Phenomenal concepts man, thank you for sharing this with the world (also love the single tilt fence idea, been wondering what the best one would be for us and that makes a lot of sense for quick and precise adjustability).

[@smc4lcc]

Nicely done, that router table would be very useful. Thanks for sharing.

[@lescotta7427]

Why the hell didn't you come out with this idea back when I made my table????? Great idea great job as always..........

[@أبوالمهدي-ر3ص]

أنا أثق بك قبل أن أرى الفيديو أعرف أني سوف أستفيد شكرا لك

[@АндрейКорытин-ш4с]

интересная приспособа. не часто ,но пригодиться. взял на заметку.

[@floridasaltlife]

This is the best, I think I will make mine with this hinge setup.

[@sgsax]

Another ingenious Izzy invention! Can honestly say I've never seen a router table quite like this one. Thanks for sharing!

[@frankherring6253]

Izzy; hope this note finds you feeling well. I have been wanting to make a horizontal router on my the side of my tablesaw, hinging is no problem but I hadn’t been able to figure out how to adjust the height, this will be just the ticket. Thanks brother!

[@douglanglois456]

Ingenious. Love how you are always thinking about how to eke out every last bit of functionality out of a tool, doing things that no-one would have imagined possible.

[@MrRosco9er]

You're a genius

[@xsbxsbxsb]

Fantastic! Hi to all the guys on the "Have I ate too much?" podcast. Your colour choice brings back fond memories of my father's woodworking. He called it Teak red.

[@inoemanunggal8588]

Good job Sir .. 👌 .. Briliant .. 👍👍👍👍👍👍🙏 🇲🇨

[@josephbrauer2573]

I have watched this video 5 times since KZbin first released it , Izzy this is one of your greatest creations , I need this table in my life and I do want to build one for myself ! thanks again . it's gems like this one that keep me tuned in to your videos .

[@duffjolly4428]

Another great alternative to a what is considered standard. Well done!! Cheers

[@bnalive5077]

You are definitely a master of the craft. I love your videos. I’d be happy to have one tenth of your talent.

[@anode505]

Damn I love your vids. Quick, no ramble-babble. Videos for those in the know.

[@jeremyspecce]

Finally I understand what that bevel underneath is for!! Wow!

[@lavernemcintosh8959]

You amaze me. I don't do anything that works as easily as your videos make it look. Thanks for sharing.

[@CSSIandAssociate]

Izzy this tool station is "FANTASTIC" I love it. Will be making one glad you mentioned dust collection. Super useful tool station very much like the stain color as well. Will from Akron Ohio

[@bradroon5538]

Genius. Now I have to change mine, dammut!

[@paulbehrens5842]

Can't wait to see more of this table.

[@brainfornothing]

Very clever ! Thanks for sharing !

[@marvinmarlin9655]

I just love the fact that you make practical tools not works of art

[@JoePierceMaker]

This is cooler than any router table you can buy. Great job Izzy!

[@EddyGurge]

I LOVE that pivot fence. Coming soon to my router table!

[@DIYBuilds]

This is honestly brilliant izzy. Great job.

[@izzyswan]

thank you

[@Владимир-о3й1т]

@@izzyswan I like your work and your ideas, I Express my recognition to you! I will be glad to communicate with you!

[@osa8osa]

Izzy you are one big 👑 King 👏👏👏

[@joedaq6678]

Wow, good job. A Horizontal Slot Mortiser !!! I like it ! Izzy, knocking another one straight outta the park!

[@latherookie]

You always impress. This is an easy build that anyone can build. Even with a circular saw and screws. Thanks Izzy for your great ideas.

[@aeratj5741]

amazingly simple in conceptualization and brilliant in execution. thanks izzy.

[@BustersCNCchannel]

That is really cool, I shall be making one this weekend.

[@billmiller2836]

To repeat some of the others I agree this is amazing!

[@andris6727]

Замечательная работа!!! Браво Мастеру!!!

[@keyipeibuidailiam7800]

Two videos at a time, awesome idea to save time😉

[@TheSatyrblue]

That is beyond awesome. I am so happy you are uploading again. The versatility and capability of that design are amazing. Great job as usual.

[@bobleeswoodshop7919]

Izzy, You went and did it again !! That’s crazy!!! What a fantastic design!!

[@stevewalker7822]

Amazing cocept and build!

[@clydedecker765]

Izzy! Love your ingenuity. Always look for your own way to get something done. Not necessarily to most expensive way... Great! Sometimes I wish I knew a little more about where you're going before you start but ... we get there.

[@walterkalab432]

echt super so einen Frästisch habe ich noch nicht gesehen alle Achtung lg Walter aus Vienna

[@frenchriversprings]

Good job Izzy. You are a real genius!!!!

[@tfk5240]

Izzy Thanks You Are incredible I very likve it this conception

[@PetAllDogs]

Thanks for the tip on working with warped plywood. Unfortunately as someone who works at a big box I can say that is the only way pine plywood comes in off the truck by me.

[@izzyswan]

i feel ya man i have seen it happen

[@johnwilliamson7081]

WOW. So glad you are making vids on the reg again.

[@John_Malecki]

this came out awesome brother. SO many uses for this thing. stoked to see you getting the shop together!

[@wayneking8502]

66th St. Uyyg y5y⁶⁶

[@marcioluislorenzi]

Again... quite smart you project!

[@joeldoyle6359]

Good job, good design

[@kirkradzwill8311]

I truly like the fence with one side fixed.

[@AdeAhmat]

You're a crazy inventor. Love your works...

[@NathanHintz-SwingGen]

This is the one i need for the crazy angles i need to make. Best design Ive seen. Thanks!

[@jarlathgibbons1967]

Very clever as usual Izzy. Can't wait to see what you do with it.

[@bombaydan]

Just brilliant, thanks from London

[@Alrukitaf]

A fine exponent of world-famous good old fashioned American know-how. Kudos.

[@azmike1956]

Looks like a plan man, gotta make one! Couldn't help but notice that we both have identical table saws. That rip fence is great to run jigs & fixtures on. Thanks for the great idea. 😊

[@arnulfolopezpena3312]

Buen trabajo amigo izzy saludos me gustan tus vídeos que haces

[@gabrielgomescunha]

Beautiful

[@dave_ecclectic]

I like your design and noticed a possible improvement, at least for me. As long as the router can move on the table why use a moveable fence. A fixed fence using the router adjustment would be nearly as good. The vertical adjustment can also be a horizontal adjustment.