Shop This Barricade Trail Force HD Front Bumper: terrain.jp/2MwcbkK Subscribe for Daily Jeep Videos: terrain.jp/SubscribeXTyt
@williammccaw9286 жыл бұрын
Perfect exactly what I needed. Half way through installing my new barricade and I found you. Took me a little longer than 20min but 👍👍Thanks~ Extreme Terrain Rocks
@alpacalies75582 жыл бұрын
I bought this for a 2020 JT with OEM fogs. Ad says they should fit. The ones installed here look just like the ones I have, but the bracket looks NOTHING like what we see here. This is some sort of circular adaptor or bracket. Mine came with a single riser for the inner bolts. Even then, both inner and outer brackets were about an inch short of reaching the fog light tabs. I’ve called four times now trying to get the right brackets. What is the deal with the JK vs JL/JT brackets on the bumper?!?!
@gilbug012 жыл бұрын
Just a bit harder than he suggests here. Very hard to line up the brackets t attach to the frame rails.
@SR-sg7qk3 ай бұрын
Is there a kit for the license plate?
@teyjizzle3 жыл бұрын
Magazine they sent out said won’t fit factory led. Says fit oe tough so need to get it together
@Joe_Smo2 жыл бұрын
Can you put the skid plate back on?
@richardmiller38083 жыл бұрын
I purchased the 20850 JK/JL updated front bumper for my 2021 Jeep Wrangler unlimited Willys. On this install you have to remove the front frame rail end caps when installing both the Barricade front skid plate and the Front bumper. At least that’s what I have found to be the case.
@Disismomo2 жыл бұрын
Anyone know how this can work with halogen lights?
@johnnyblunts766 Жыл бұрын
Can you still remove the grill with the bumper installed?
@karinlb416 Жыл бұрын
So i get im a newbie but this was frustrating. No mention of the fog light brackets that the paper instructions tell you to install. Ended up I should not have because I cant get my fog lights to sit in the holes properly. They aren't flush at all with the included metal bracket installed. Tiny screws are stripped so I'm a bit f*cked there. Those included attachment pieces are a wicked pain in the ass to fit in unless I'm missing something.... and splitting the bumper apart to get the wiring harness? yeah that didn't happen. got a dremel to cut around the recovery hooks and ended up working the harness out from the clips and pulling it out of the bumper. It wasn't just a little finagle. Not a very complete set of instructions. Bumper looks good, but took me 4 hours to get it half installed. Will resume in day light.
@max-jq3ru2 жыл бұрын
I bought this trail force barricade bumper (or that is what I thought ...) for my Jl 2022 ... but the hardware is different from what is shown in the video !! Barricade sent me what was likely a JK bumper old stock with some adapter plates that have a bolt and a nut (instead of being like the bumper in the video that comes with 4 bolts on each side ) to be attached to the front bumper brackets... it is quite difficult to align it alone .... also it comes with two useless fog light brackets and which is a real pain in the neck the wrong screws to attach the fog light to the bumper . I had to buy self tapping screws, drill holes in the bumper to properly attach the fog lights. Last but not least : OEM bumper properly has 9-10 places to secure fog light harness ....Barricade ? None! ...and not even areas where you can tie strap it to some brackets/ small hooks (that would have costed a dollar to add ..) . I am curious to see how long this powder coat (that seems quite cheap with low thickness since I scratched it on an off road and bare metal is visible...) Not happy at all with this product as a whole .
@727brianq2 жыл бұрын
@max Yep same here. The version you and i have is a POS. Really pisses me off.
@karinlb416 Жыл бұрын
Man i wish i read this a week ago before I ordered. I'm having all the issues you mentioned and I felt like shit yesterday for not being able to install this. Fighting with those stupid attachment brackets is a nightmare!
@shipmate35772 жыл бұрын
Is there a matching rear bumper that's around this price too???
@Qu1nt_travels5 жыл бұрын
So how would this work if I have halogens? I have a 2018 sport unlimited model jl
@MR1stinga3 жыл бұрын
There’s an adapter you can buy from Quadratec
@QUIKT203 жыл бұрын
@@MR1stinga do you have a link?
@shipmate35772 жыл бұрын
Since they haven't replied... makes me think something is wrong. So I will not be buying this product from them.
@Disismomo2 жыл бұрын
I need to know as well
@philmiller77003 жыл бұрын
Did you say a winch up to 1200 lbs? Thats like an ATV winch?
@morganholt8435 Жыл бұрын
Yeah people aren’t perfect he meant 12,000 lbs like the description says.
@wadee31834 жыл бұрын
My fogs on my 2020 have 3 bolts, not four. I sent my first bumper back because the packaging said JK and my fogs wouldnt fit, but as I watch the video, it looks just like the bumper I sent back and i am concerned the new one I ordered will not match up to my fog lamps either...
@PokemonRed-v873 жыл бұрын
Same thing for me. Horrible
@gingerroot32266 жыл бұрын
You're not Ryan...
@jessicagomber Жыл бұрын
The paper instructions and video are not very clear or detailed at all!!