EXWAY ATLAS CARBON 2WD - 4WD CONVERSION TUTORIAL

Here's a tutorial of how to convert the Exway Atlas Carbon 2WD to the 4WD. As a reminder there is no official order to complete the steps, I just did it in the order that makes sense.
NOTE: Please be sure to use glue or adhesive in the seam of the new ESC when installing it to prevent water damage.
Video for pairing remote to both ESC's and setting board to 4WD - • Exway Atlas Carbon 4WD...
Find me on Instagram - ...

[@veymaxboard]

Love it!

[@jeroekoe]

i already subscribes after 10 seconds in the video bruh. keep it up. the subs will come

[@jeroekoe]

i bought the 2wd carbon version btw, thats how i got to your video :) was looking for some reviews compared with the 4wd version

[@BrentMinder]

4 screws are out, and I've been heat gunning for 20 minutes and this thing won't budge😢

[@mitch_wies]

I know it’s frustrating. Did you manage to get it?

[@BrentMinder]

No. Gonna try again today. Just afraid i'm gonna ignite the battery pack or fry the ESC. I put a fireproof cloth over the battery area to minimize heating it.@@mitch_wies

[@BrentMinder]

I got it, and it's empty. I needed to open the rear one. Sigh. I have a short in my board, so I wanted to check all the connections. I don't see the open grid in the rear one. It looks as though it's been filled with plastic. So I concerned with heating this one.

[@mitch_wies]

@@BrentMinder Dang mate. Best of luck. Maybe use a hair dryer instead so the heat is not so intense? But at least you know how much it takes now.

[@BrentMinder]

Hey @@mitch_wies , i finally got it. I was removing it because of a "short" reported by the remote afterwhich my board wouldn't stay on. It would connect and then disconnect when giggled. I didn't see anything loose, but now the board won't even come on after a re-pair. The support guys think it's the battery because originally hooking it up to the charger got it reconnecting, but now not even that works. I'll probably be looking at getting another board. I got 1,800 miles out of this one in 8 months. Thanks for the video and the replies!