EZ-Rig Crane Lifting Demonstration

  Рет қаралды 182,922

EZ-Rig Crane

EZ-Rig Crane

9 жыл бұрын

Watch for yourself just how the EZ-Rig mini crane can lift heavy equipment in minutes. The EZ-Rig Crane is portable, easy to use, safe and affordable.
Learn more about this might mini crane on our website: www.ezrigcrane.com

Пікірлер: 24
@robertspivey46
@robertspivey46 5 жыл бұрын
You know for $12,000.00 this thing should have hydraulic drive and electric mobility.
@muntee33
@muntee33 28 күн бұрын
Why not put the weights on the end of an arm which pivots at top and has a jackstand that lifts it up&out so you can jeep the COM within the footprint for a wider scope of tasks
@user-kw4rn1ov9x
@user-kw4rn1ov9x 3 жыл бұрын
I think it’s great idea but too expensive
@daddyhermanson9737
@daddyhermanson9737 4 жыл бұрын
$12800 on Amazon? You would have to be a mental patient to pay that much for a glorified engine crane with a winch on it ? For that money you could buy a used skid steer or forklift hell even a real crane .
@19772001corey
@19772001corey 3 жыл бұрын
You could build one for around $500.00 this a glorified manual truck crane from harbor fright
@Ramdodge582
@Ramdodge582 6 жыл бұрын
the deflection in that boom is scary. soft start VFD on the winch drive to cut that bouncing out.
@EZRigCrane
@EZRigCrane 6 жыл бұрын
a licensed professional structural engineer (SE) certified the EZ Rig Crane to handle the load-chart ratings. We were not satisfied and destructively tested the crane physically proving that its fail points are well beyond the load chart in all instances. There is deflection but the video shows a lift of 400 pounds over equipment using the jib boom with a reach of 18 feet. This crane will take it and be ready for the next lift.
@Ramdodge582
@Ramdodge582 6 жыл бұрын
EZ-Rig Crane the cranes in my shop dont flex anywhere near that much at full capacity
@AndyCollins
@AndyCollins 6 жыл бұрын
Ez Rig is demonstrating a 400# lift at 18’-0” off the center pin with a piece of equipment weighing in at just over 1,000#. We could have chosen a lighter lift or shorter reach to video but we felt it was incumbent on us to show the limits of our crane and risk challenges to our claims. As a master rigger with 40 years experience in the construction industry I can say without reservation that this crane is safe within the load chart limits and has been certified by a professional engineer and fail tested by myself in our shop to validate our claims. Thank you for giving me the opportunity to respond to your reasonable and well-founded questions.
@ramhoist194
@ramhoist194 2 жыл бұрын
great
@ishardshaik6588
@ishardshaik6588 3 жыл бұрын
What is price of this unit to South Africa or have you a supplier in South Africa let me know thank you
@user-jw4nj2pg1c
@user-jw4nj2pg1c 2 жыл бұрын
Копию 2000$
@scottb2571
@scottb2571 6 жыл бұрын
And snap goes the boom
@EZRigCrane
@EZRigCrane 6 жыл бұрын
no, the boom will not snap. That is the point of deflection. Note that while the boom will flex, the base of the crane remains solid to the the ground. The crane is designed and engineered to pick the video’d load - that’s why we took the video. We want to show how the crane will react to loading and not avoid that issue in our presentation of the crane.
@joeshearwood480
@joeshearwood480 4 жыл бұрын
At the 43 second mark the base lifts on the floor
@ajaywhite9103
@ajaywhite9103 6 жыл бұрын
Can you say deflection
@EZRigCrane
@EZRigCrane 6 жыл бұрын
See note above
@Guds777
@Guds777 3 жыл бұрын
Common guys, more counterweights and shorter outriggers...
@kenm4479
@kenm4479 6 жыл бұрын
Yep, need 2 guys to use it safely
@EZRigCrane
@EZRigCrane 6 жыл бұрын
it is always wise to utilize at least two workers to lift anything with a crane. One to operate and one to hook and unhook load and to spot landing points and potential interference.
@computerjantje
@computerjantje 5 жыл бұрын
This video should be for marketing??? After seeing this video, I am sure this would not be the crane I would buy. It seems back aking to handle and it has to be handled by two and it looks not very solid and safe. way to thin metal parts. Also the design does not seem thought about with the unhandy shape. And the it is said "it only takes a minute" but we see a video edit time cut from manouvring to the cargo already on. This gives the impression it even takes way more time to handle the crane. Maybe the crane is not that bad but this video makes sure we start to doubt this crane. If this video is meant for marketing (It is on the crane its schannel so it seems) then it is the worst add I ever saw :)
@masonrexsocks
@masonrexsocks 4 жыл бұрын
Wow that thing looks sketchy as hell. Like buy an entire forklift with an extension boom attachment for that money lol then be able to resell it later.
HOEFLON C1 - Mini Crane
3:01
Hoeflon
Рет қаралды 26 М.
Making Pickup Crane
11:40
Made in Poland
Рет қаралды 1,9 МЛН
Me: Don't cross there's cars coming
00:16
LOL
Рет қаралды 15 МЛН
Пробую самое сладкое вещество во Вселенной
00:41
HitchLift - Setup Guide
4:37
Hitchlift
Рет қаралды 769 М.
Ez-Rig portable crane
1:25
Andy Collins
Рет қаралды 205 М.
Macara pivotanta
2:06
Hurduban Vlad
Рет қаралды 168 М.
400 kg mini crane premium brand - Unimaac Engineers
2:30
UNIMAAC ENGINEERS
Рет қаралды 576 М.
Jib Crane Installation: Mounting and Grouting the Crane Mast!
29:24
Keith Rucker - VintageMachinery.org
Рет қаралды 69 М.
Producing Tractor forklift attachment
19:07
Made in Poland
Рет қаралды 1,8 МЛН
cara merakit  mini crane  listrik  langsung di lokasi
20:14
Rukun abadi
Рет қаралды 29 М.
Me: Don't cross there's cars coming
00:16
LOL
Рет қаралды 15 МЛН