Making Pickup Crane

[@Handleyman]

Who would have guessed that all those episodes ago when your were building your shop, that this is the type of quality products you would be fabricating? Brilliant work!

[@jonasandersson7367]

He would

[@opendstudio7141]

I did. Just think what could be done if he had full access to a large industrial machine shop and the free run of a giant scrapyard. Many of the inventors of 19th century farm machinery and technological innovation migrated to the U.S.A from that region. They turned vast prairie lands into mega grain farms.

[@shortchanged.]

@@opendstudio7141 yep then it was welcome to the dust bowl

[@vanda9733]

CTe

[@ШакирКылжыров]

ууфффйцц

[@deadman_walking487]

The only problem with being such a great craftsman is most people don't appreciate what you have done because it looks factory.

[@ekodubek]

Truth, and they will buy a crane from local store with fancy colours and shining covers than crane will brake on half trying to lift 100kg than they will see on inner side of fancy cover text Made in China. They will start appreciate :) home made staff.

[@christopherpandolfi1229]

They don’t even appreciate the true cost of the labor and skill involved.

[@haroldphipps3457]

@@christopherpandolfi1229 , so, you know my boss!!

[@iiianydayiii]

@A M I agree. The validation of other people isn't important if a job needs to get done.

[@МихаилБыков-г6к]

Спасибо!

[@Wlodar_-zk1iv]

10pln Ну вот?

[@DanKoning777]

If you did that with such a little space, I can't image what you of done if there was more. Well done! *God bless.*

[@MadeinPolandChannel]

Thanks. God bless 🙂

[@samsungitsmy7092]

@@MadeinPolandChannel ile kosztuje dźwig dla fiata ducato rok prod. 2001?

[@sonovoxx]

Ingenious. I was a little worried that it looked like a winch rather than a hoist (braked v unbraked/gearing only), but it seemed to hold the load without problem. All pickups should have these!

[@noelcunningham5338]

0000000000

[@adrianadim9836]

Jestem pod wrażeniem projektu jak i jego wykonania. Wielki szacunek dla Pana. Pozdrawiam.

[@fredbaer7066]

What does a mythical deity have to do with his skills? If you claim that these were given to him by this deity then by rights you also should have that skill set. Any way Polish ingenuity at it's best. Thank you for the idea.

[@prodigalson2670]

That 2013 style trap music really brings some nostalgia. It is also really enjoyable to watch you fabricate.

[@chudotxt]

На сколько я помню в Польше уже давно нечего спиздить.. Так что "воровайка" не актуальна) За идею и исполнение - лайк.

[@Patriottoo2]

How can anyone not like this build video? Your engineering/fabricating skills reveal that you are a superior creature to be revered, and admired. :-)

[@BrilliantDesignOnline]

It is not just that you are a GREAT fabricator, but moreso that you are a natural born engineer. Do you do any drawings or CAD models? Because you seem to have an overall picture of the finished product imagined before you start; on this particular one, somehow you envisioned the jack tower fitting behind the cab of the truck and also thought about the support foot function and storage beforehand. It is just so magical to watch you build a project with supreme practicality. Thank you, a proud subscriber.

[@danielkushla2383]

And the million dollars in tools 😂

[@ukaszszary3967]

Oglądałem 3 razy , jestem pod ogromnym wrażeniem, Gratuluje .

[@andrewostrelczuk406]

Absolutely love the Engnerding you have put into this! Since you have already got the winch. On it a pivot piece with a loop Eye could replace the Jack and eliminate the extra steps to get it prepared for working. Weld a hollow tube on the front side of the down leg support put a plunger in it and a slot to pass a lever into it with 2 clevis pins and a shackle to connect it to the winch pull up the lever the pivot reverses the action and pushes down lifting the foot up and then you can set your stability leg beneath it. You could even index it by several gates, and pin and once up simply twist it into the best level for it to hold there. When done simply remove the clevis pin and slide it up to height for storage ! Great Work!

[@paddybrady9884]

Nothing like a made in Poland video just in time for lunch..big love from Ireland🇮🇪keep it up...love the channel👊

[@karelmarx8899]

You're soo young and sooo smart. Have many wonderful tools in your shop. God bless you and your work. Wish you and your country all the best. Greetings from Slovenia.

[@rbclima]

Dude... it's the best build in the channel! That thing turned out freaking great 😨

[@tjkoker]

Your design and ability to “Make” on the fly are incredible. Outstanding project and video! Cheers,

[@juliuszkocinski7478]

Ten kanał chyba samodzielnie utrzymuje na rynku ze dwie hurtownie hutnicze :D

[@testspl7968]

Dokładnie :D

[@grzegorzzajac1983]

Mhhhhhh

[@joselrodriguez5999]

Great project! Glad to see that the Fireball Tools made it to Poland. Love you shop and your ingenuity!

[@gmendes1831]

Always: professional, heavy and strong! Thanks for share :O)

[@WorkshopFromScratch]

Great idea :) Pozdrawiam😁

[@ladedk]

Man, that is one slick design. Very cool.

[@PDXPiggy]

I was mumbling to myself “that’s pretty slick” just before I opened up the comment section. 😂

[@kmech3rd]

I love how easily you work with steel. My tools are not as rigid, so I do most of my work in aluminum. I envy you your ability to make such strong parts so easily.

[@Sinvare]

Awesome. To help load the truck, you could put a pully + locking cleat (used in sailing) on the far side of the bed to give you a line to pull the load horizontally over the bed. The locking cleat is not needed but it does make it easy to tie off/release the line one handed. A carabiner on one end of the rope, would allow you to make a quick loop around the object and back to the rope. The loop would tighten under pressure and be easy to release once it is gone.

[@brissyboy7164]

Awesome and you filmed it very well so its easy to follow along and try to do it too ........................ Thumbs Up

[@andrzej3511]

Mały, zgrabny i lekki podnośnik do małej paczki (w przeciwieństwie do wielkiej paki TIRa), ale o wystarczającej nośności. Wykonany przy użyciu ogólnodostępnych materiałów, prosta konstrukcja, niewymagająca zaawansowanych narzędzi - idealna do budowy we własnym garażu o ile jest on jako tako wyposażony. Imponujecie mi chłopaki! Zamiast pierdzieć w stołek jojcząc "nie mam kasy" nie czekacie na cud by kupić fabryczny tylko hyc do warsztatu i rozwiązujecie problem własnych potrzeb. Być może znajdą się chętni i zlecą Wam wykonanie kolejnych? Tak trzymać: znakomity pomysł, świetna robota!

[@ПавелИванов-ю5с]

В место домкрата гидро установку и всё супер! В принципе для себя и так просто класс! Всего хорошего!

[@василийпетров-и7т8т]

A PROFESSIONAL! all stages are performed professionally and high-tech! It's a pleasure to watch! All operations at the workplace are modern and efficient!!! With such a number of machines and equipment, the production of AEROLINERS and SPACECRAFT is possible!!!! This is a MINI-factory and not an individual workshop! I note the violation of safety regulations at work - a kind of dramatic story with bare hands in the absence of elementary PPE!

[@scroungasworkshop4663]

You guys are amazing. Great ideas and excellent fabrication skill. Cheers from Australia 🇦🇺

[@АбрамАбрамов-ю2з]

Класс, супер.👍 Всегда смотрю Ваши работы с большим удовольствием.

[@stevebrown5145]

Very nice. You've certainly come along way since your early videos making stuff in your old 'workshop' and an old stick welder. Well done,long may you continue.

[@НиколайСмирнов-г2ж]

Супер👍👍👍на все💯

[@downunderdan5132]

Brilliant man! Love watching you build very useful workshop tools. Just making work easier! Keep up the great work. Greetings from Australia 🇦🇺 😀👍😎

[@silverbullet7434]

Thats about the best one IVE ever seen made . Really purpose built to use on your truck. Fitted to not move or rattle. Setting the bar higher for the next builder to match or do better.

[@RichardBronosky]

I'm proud to be a 2nd generation Polish-American immigrant. This is the kind of thing we do because if we don't do it for ourselves, it won't get done [correctly].

[@inventor1978]

Podziwiaj i podziwiaj swój mechaniczny talent!👍 thank you!

[@hamburg040hh]

Хорошая работа Молодец респект

[@BrodatySqurviel]

Chcemy więcej i dłuższych filmów😉

[@ingener1707]

Красава, классно придумал всякую мелочевку грузить в одного сойдёт)))!!!

[@Chip70301]

Идея отличная, жаль у нас такую штуку полностью съемной надо делать. Приехал поставил, поработал снял. 12.5.1

[@ingener1707]

Да согласен полностью, в России такое не прокатит!

[@АбуАлиибнСина-щ2г]

@@Chip70301 Тогда, наверное, проще будет в кузов автомобиля разместить её, но продумать систему крепления только во время работы, а так, в обычном режиме, как будто просто груз везёшь. Видел такие краны в продаже - Грач, кажется, называется. Но ценник за сотню, так что дешевле и качественнее будет изготовить самому.

[@michaelfoley1080]

If I could have given you two likes, I would have. Brilliant example of what we call farmyard engineering in Ireland.

[@randhirsookdeo4578]

Absolutely amazing, i love your videos they are very well done and inspire me to make more things for myself. Peace, Health and Success to you.

[@jamescole5658]

Just tripled the value of the van 😂 great build and video !!

[@wez253]

😁👍

[@gordonpeirce5967]

Wow your workmanship is fantastic and the completed working of the hoist is briliant.

[@artmac4556]

Good idea and well done with welds and joints few things need to be customized like 10:40 right? good jobe my friend good jobe!!! keep it up and upload more of your work.

[@glenpaul3606]

Ingenious build of the crane. Great work.

[@zbudujsamdom]

Sztos ✌️

[@Gabrulo_knifemaking]

The best tools are homemade, that's the truth! No company would ever build something like that for an old truck model, and if custom made would costs more than the truck itself 🤣 but you made it in a fairly simple way (even if he use expensive tools you can actually make the same thing with cheaper tools, but in a longer and difficult way. Just check his earlier videos to see I'm right) and in the most comfortable way to use! Great job as always!

[@michaelzimny9746]

Fascinating work, much love from the Polish American community🙏🏻

[@viorsa8200]

Excelente proyecto muy bien desarrollado y mejor ejecutado cómo siempre , una magnífica grúa semiautomática , gracias por compartir tanta creatividad y conocimientos , un saludo cordial y por supuesto un gran like desde Narón , Galicia (España) 🤓 😜

[@nosaltiesandrooshere7488]

👍 Danke fürs Hochladen! 👍 Thanks for uploading! 👍 Very good and beautiful, thank you! 👍 Sehr gut und schön, danke

[@medodz-ll5iq]

باز للرجال داهية انت بلاصتك فالجزاير اصاحبي thankyou very much

[@davidsteinfeld9123]

I have built many a crane in my time for my pick up trucks it can take some doing and bit of creative imagination never have I seen something so elaborate as this build I have tried to build a folding crane using old wheel bearings and boz tubbing but this is nice 👍 I no longer have anything I made but I am sure lealouse of all your toys I had nothing like that only hand tools and a cheap Chinese stick welder to go about it the good news is it was purposeful till some one totaled my truck with my best work ever that story is I got what paid for the truck because of my creation yep I got paid it's a first now how I see yours I may be tempted to do another build thank you for sharing this idea a very nice build Thank you for sharing

[@estebanm7777]

No sólo el trabajo sí no las ideas de este maestro son únicas. 👏👏👏👏

[@tylerstrife]

Отличная воровайка получилась))

[@AGRIMOVIEemi]

Great video Tutorial 👍👍👍

[@tomahoks]

Whos the first in a million, you or Andrew Camarata? Game on!

[@tomahoks]

982 vs 986000

[@tomahoks]

Now 991 vs 998 yikes.

[@tomahoks]

Sorry man, Andrew beat you to it. He is in one mil now. Better luck next time!

[@tomim7187]

You never disappoint! Incredible build! Love it!

[@davewilson1591]

An idea worth using.! Great utilization of limited space. Now you can get heavy stuff in your truck without breaking your back. Thanks.

[@MrJeb707]

Hello from California! I'm sure you're aware, but watch when you put a load in the back, then release the stabilizer jack you don't drop the load on yourself! Love the channel!

[@34057616]

Oglądając Twój film przypomniało mi się że TERENWIZJA szuka kogoś kto wykona dla nich ręczną wciągarkę, może podejmiesz się?

[@tizi0728]

In my opinion, the best tool you've made...Brilliant..

[@mirkopg69]

The old fiat ducato is perfect for some projects like this. Cheap and practical 👌 the ingenious of Poland people 😊

[@MadeinPolandChannel]

Couldn't agree more!

[@andreainarteilmistico4695]

Complimenti, una paranco esterno così almeno sui youtube non l'avevo mai visto. Ciao dall' Italia.

[@peChoOO]

Good Job!

[@Dengezik100]

11:23 Great success! 👍 But ... You forgot to tie down the chipper. Wait, wait ...!!!

[@muharremulusan]

LIEBHERR left the group... you are such a clever man.. 👍

[@BDL090754]

I appreciate my woodwork, - but when I see these amazing metal work craftsman, doing work of this high standard, it is truely brilliant.

[@dancoleman1269]

I'm no machinist, and I'm not qualified to judge you. But I'm thinking you must be some kind of machinist god!!

[@wanta66]

すばらしいいですね！！👍👍👍👍👍👍👍👍😊😊😊😊😊😊

[@288graf]

Polak potrafi. Łapka up za to.👍👍👍👍👍👍👍👍

[@120Livi]

Like Polish version of those Make It Extreme guys! Love it!

[@Жорыч]

Молодец пшех, хорошую штуку сделал. Только лебедку нужно от дождя защитить.

[@szpieg49]

Wiem, że komplementów masz już całego busa i pełną szafę ale i ja dodam: super robota, niech służy.

[@MichSC]

Nic dodać , nic ująć 🙂

[@ДизельУРФО]

Молодец!!! Приятно посмотреть, есть ещё люди с руками!

[@shanehaws3828]

Got yourself some fireball tool Squares I see

[@ekfreeindian]

Hey there, don't keep this stuff with you only... Start mass production... It's a necessity of every pickup owner... Great job... Love from India

[@darekp_02]

o kutwa, ale pomysł i wykonanie, szacun

[@Thewatson77]

I swear you’ve got to be the most creative genius in Poland! Thanks for the video!

[@thorflot]

Love it! Been thinking of something along these lines for my trailer, but never got around to figuring out the rotation. Thanks for the inspiration, looks great!

[@angrydragonslayer]

i am jealous, just the amount of paperwork to add a function to a worktruck here would put me off from doing this

[@JD-526]

Nice job. Love the use of the bearings.

[@jt9498]

Excellent! Well done, and a great use of available space on that truck!

[@kopitothai8163]

Great idea Mr. If add one hydraulic jack to the leg that will be good.more convenience. I wil make oneset for my truck.Thank you for share.

[@PeopleThatFallApart]

Wow, the truth is that the end result is impressive. Good job.

[@pcb1962]

Awesome job, Abom took about 6 weeks to make his.

[@pancebula8106]

It's not engineering... It's state of mind. Polish mind You...

[@smroog]

EXCELLENT EXCELLENT EXCLLENT !!!!!!! Video, work, design and SHOP. , JUST EVERYTHING !!! Makes me jealous of your work ability, SHOP, and design. GREAT JOB all around !!!!! Would be great if I could find a fabricator here in San Diego on YOUR LEVEL !!!!

[@tobikruse11]

great job, as usual. love your videos since day one!

[@rubenmolnes]

This is some next level stuff! Make yourself a Patreon, release videos early there and have fans show some support! You've given me hours of inspiration with this channel 👍

[@АлексейЯннов]

Ай да молодец. Никогда бы не додумался.

[@hazypaws5747]

Fajne, tylko jakby zamiast wyciągarki i podnośników zrobić siłowniki, pompę hydrauliczną, rozdzielacz itd. 👌

[@tonysylvester721]

👍👍 from the USA🇺🇸

[@luismiguelmaluendaortega1447]

Excelente trabajo.gracias.... 🇨🇱🇨🇱🇨🇱🇨🇱

[@kabovasya]

Идея не новая но исполнение на ВЫСШЕМ УРОВНЕ!!!!!!!!Респект!!!!

[@حسين-ج9ط7ي]

thank you teacher

[@honeycuttracing]

Two thumbs way up!!! Great build, especially when you are dealing with the little space you had to work with!! Where did you find that double action jack?

[@horstszibulski19]

This thing in fully hydraulic with the pump of your last build would be over the top! Great work, so much easier work now! :-D

[@rickden8362]

That was some impressive precision work, I just wonder if it was heavy on multiple procedures and the need for machine shop and welding shop to build.

[@klaus-dieterotto8531]

Eine sehr gute Erleichterung. Dieses Hebegerät ist Sehr schön und gut durchdacht durchdacht!!!!

[@johnfisher4910]

Amazing engineering and craftsmanship!

[@georgeh9967]

good work , good design. with a lathe ,a welder, and an angle grinder. anything can be made.