I’ll probably use 33 in tires to prevent any cutting
@stevenrussell59373 ай бұрын
34s dont need cutting either
@minecrafter4623Ай бұрын
@@stevenrussell5937 Do you run 34's? Trying to find some ideas for wheel size and tire size for a 2015 F150... Thinking 18x9 with 285/65R18 KO2's or something
@itsmejongee29 күн бұрын
@@minecrafter4623 they used an offset that pokes the wheels out too much. You can fit 35s on a closer to stock wheel offset and have no rubbing or trimming.
@thomasvanderhoff7689 ай бұрын
Don’t forget rear wheel liners mud flaps and bug deflector.
@user-tu7rr1zg4b2 жыл бұрын
You should put a picture of ford's gens when your saying it on the side smaller picture I'm new to ford just learning about it and we'll my memory ain't that great 🤣 Thank you!!!
@cameronbrown30272 жыл бұрын
I’m interested in the wheel offset also. Good question Matt Dorsey! 👍🏻
@BuiltRightInd2 жыл бұрын
Hey Cameron, they are Method 316 8.5 x 17 with 0 offset. Please check out our build thread for more details on the mods we've installed! builtrightind.com/blogs/build-breakdowns/f-150-build
@jesco8577 Жыл бұрын
@@BuiltRightInd little confused with the offset is that a positive or negative offset? -25, 0, or +25
@BuiltRightInd11 ай бұрын
@@jesco8577 Sorry for that misinfo there! These are 17x8.5 with +0 offset and 4.75" backspacing
@amateurbiggamehunter769110 ай бұрын
@@BuiltRightIndMatt, I like the poke on your new set up. I get the 0 offset to achieve the poke but how do you decide which backspacing to get? Thanks.
@BuiltRightInd10 ай бұрын
@@amateurbiggamehunter7691 Offset an backspacing are kind of the same spec on a set of wheels. So these are a 17x8.5 wheel with a 0 offset. That's all you need to know to achieve the same fit. These tires are pretty beefy, which adds to that look. A slightly narrower tire and there wouldn't appear to be any 'poke'.
@85mackey1 Жыл бұрын
It’s not “built right” if you have to cut a bunch of stuff to make it work.
@piesareround5 ай бұрын
Trueeeeeeee
@mattdorsey99062 жыл бұрын
What size tire, said 35, but by what and wheel offset?
@BuiltRightInd2 жыл бұрын
Hey Matt, they are Method 316 8.5 x 17 with 5.44 offset. Please check out our build thread for more details on the mods we've installed! builtrightind.com/blogs/build-breakdowns/f-150-build
@fabr6r6 Жыл бұрын
That is a backspacing size not offset
@BuiltRightInd11 ай бұрын
@@fabr6r6 Thank you for catching that! These are 17x8.5 with +0 offset and 4.75" backspacing
@danielrosas97987 ай бұрын
Nice tire and wheel combination!! I'm looking into getting this combo as well. Just saving up. Where you able to reuse the stock lug nuts? Or did you have to use some aftermarket?
@josipdolic63912 жыл бұрын
Absolutely love it
@hungvuishare97062 жыл бұрын
thanks for sharing
@Youtubeuser1aaАй бұрын
Does it fit if you actually take off road and flex
@nax91111 Жыл бұрын
Looking at levelling/lifting my '22 XLT, just curious if you have had any issues with the lane keep/pre collision sensors? If not, maybe I'll be looking into this setup as there have been some issues with just front spacers. Thanks.
@BuiltRightInd11 ай бұрын
We haven't had any issues with those sensors at all! Just a bit of rubbing under full lock, but that's it. We love the setup
@jesco8577 Жыл бұрын
any update on this build ? hows the tire and wheel combo? rubbing issues solved? on and offroad?
@BuiltRightInd11 ай бұрын
kzbin.info/www/bejne/hHe9o5lobtB-e7c
@trumpurace16352 жыл бұрын
Can you share which fox 2.0 you used? There are 2 different part numbers from Fox and there is a difference in spring rates.
@BuiltRightInd2 жыл бұрын
We used Roush part number #422014.
@ACBL13 Жыл бұрын
Have you had clearance / rubbing issues with this tire size
@BuiltRightInd Жыл бұрын
Little bit of rubbing at lock in reverse. We would need to do some additional trimming of the bumper to resolve it but it’s not a problem, so we just deal with it. 👍
@Sir.VicsMasher11 ай бұрын
2:30 How did you achieve this 1/2" of lift in the rear?
@BuiltRightInd11 ай бұрын
We adjusted the preload on the rear shocks until we were happy with the level! Ended up being right around the 1/2" expected.
@forrestbaucom15092 жыл бұрын
What is the after measurement ground to fender?
@BuiltRightInd2 жыл бұрын
We'll take some fresh measurements today. We actually ended up going back recently and re-adjusting the front coilovers back to the original location to further level the truck and gain tire clearance. We haven't noticed any adverse effects but will keep you updated. We'll cover this in a future video but that's the update for now.
@BuiltRightInd2 жыл бұрын
Sorry for the late response here - we've been hauling loaded pallets and more with the F-150, so we're exercising the suspension and things have definitely settled out by now. We're sitting at 40 3/4" in the front and 41 5/8" in the rear (measuring from the asphalt to the top of the wheel wells). Please let us know if you have any more questions!
@forrestbaucom15092 жыл бұрын
@@BuiltRightInd thanks. I understand expansion pains. Moved my MIL in with us. We are STILL trying to find stuff we moved to make room for her. Good luck with the new building. I'll be following y'alls progress.
@NINE-PACK Жыл бұрын
Can we get a follow up video to this?
@BuiltRightInd11 ай бұрын
100% kzbin.info/www/bejne/hHe9o5lobtB-e7c
@memphis28571 Жыл бұрын
You measured the rear with a bed full of tires and wheels. Lol
@BuiltRightInd Жыл бұрын
Did you notice that we didn’t go back and measure after? 😂
@Judgedredd188 ай бұрын
What size wheels of those methods??? Can you link me a site
@BuiltRightInd8 ай бұрын
We love them! Check it out: builtrightind.com/blogs/build-breakdowns/f-150-build
@Jeremy227762 жыл бұрын
Did you end up cutting off the crashbars?
@BuiltRightInd2 жыл бұрын
We removed one side and then trimmed one back on the other side. We'll do a follow-up video in a couple months with final thoughts and stuff where I'll make sure we show that.
@NINE-PACK Жыл бұрын
@@BuiltRightIndwhere’s the follow up vid?
@CarlosRodriguez-bc2sh Жыл бұрын
What size are the tires?
@BuiltRightInd Жыл бұрын
They are Falken Wildpeak A/T3W LT315/70/17 tires mounted on 17"x8.5" Method Race Wheels 316, finished in Matte Black
@joshuamahan3403 Жыл бұрын
What is the wheel offset?
@BuiltRightInd11 ай бұрын
These are 17x8.5 with +0 offset and 4.75" backspacing
@TrevorChenier11 ай бұрын
4.75” backspacing??? Is this achieved with 4.75” spacers? My apologies, I am ignorant about this stuff. I really love the look and beefiness of this super tough stance, looks amazing.
@JamesWilson-lg7bx Жыл бұрын
Those Sparks can melt/pit your paint 👎🏻
@fernandizosbedtimestories6807 ай бұрын
Dang y'all butchered your truck to get a look. 35" is an absolute waste. Drives slow on the highway too. Max Is do on my 22 f150 wud be 33". That's an absolute mess..
@BuiltRightInd7 ай бұрын
Really? We like it! Drives fine, pretty capable off road, not ‘slow’ on the highway either. 35’s aren’t for everyone 😉