F-150 ReadyLIFT Lift Kit 7" With SST3000 Shocks 4WD 2015-2018 Installation

[@User-hb4yf2be7r]

Excellent video my dude. The kit went right in. The Cutting was a little fun and the only thing I did different was take the steering rack off before the diff gave me clearance to get in to get the top left Bolt

[@sammy50001]

It's called ReadyLIFT because once you've completely disassembled the entire drive train then you're READY to LIFT.

[@rollingprobablecause19]

Isn't it way easier to install the hub and actuator to the lifted knuckle on the bench?

[@Car-lover245]

I’m going with the 4 inch lift kit,🙂on my f-150

[@Finance1979]

You make it look so easy

[@Pfishey]

How does this lift compare to BDS and fabtech? Really torn between the 3 but leaning towards BDS because of their warranty

[@Leiserboys]

Do I cut the front off of the Diff upper mount? It’s hard to see in this video what is the front and rear.

[@TreyMcmanus]

Does this fit on 2 wheel drive 2020 f150? I installed mine last might but I had to cut the front cross member down and I couldn’t drop the rack n pinion due to the frame being different. Now my tie rods arnt extended enough, what do I do please help

[@417garage9]

Is this the lift kit with 4” blocks in the rear ?

[@General_DDay]

I had my dealership mechanic install this lift on my 2018, and I noticed he didnt set the lower control arm eccentric cams to full inboard they are pointing upwards. Should I be concerned? Another issue I am having is the lower part of the u-joint that attaches to the rack and pinion just barley rubs on the frame of the truck. The installers says there is no adjustment to move the rack over to make room for the u-joint. Adjusting the Heim joint will only move the upper part of the u-joint. Any idea what may have been installed incorrectly?

[@earlyblackmz]

Does this kit require a carrier bearing drop bracket?

[@imadog131]

I would never do this to my truck. People always complain about steering issues after these kits are installed and if you want to know why you will have steering issues just compare the front axle angle at frame 2:17 to the one at frame 21:25. CV joints can’t survive with those kinds of excessive angles. If you want your truck lifted take it to the boys at Texas Metal and have them do it right. By the way I’m not affiliated with Texas Metal.

[@collinevans5151]

You do understand that the truck is off the ground in both time frames. No matter what vehicle, or setup you run. They will sag when no weight is on the suspension. The weight levels the CV axle angle back out.

[@Sagittarius-88]

Good video, but too much modification for my taste. I'd love to know how this type of lift affects your factory warranty if your truck is new. Kinda think *void* would be the operative term. As far as cutting into the crossmember, given the fact it's welded to the frame, that may be considered structural damage, or structural modification. Not completely sure on that one. The one piece of advice that's missing from a lot of these types of videos is you should always check about warranty issues when making modifications. Granted, some people may simply not care, but I certainly would. I recently purchased a 2020 F150 5.0, and there's definitely some things I'd like to do with it, but not before investigating what will, or will not void my warranty.

[@حسامنواوي]

Go for with 3.5 level kit No cutting

[@stevenakn1]

Would only effect warranty on suspension components wouldn't it?

[@General_DDay]

Hey guys, is there any splash guards on the market that with fit with this lift? I haven't anything that will work in the front due to the tire hitting the guard when turning. I'm running the same lift with 20" rims and 35's

[@andrewison2194]

How did your 2018 F150 drive shaft drop so easily? Any recommendations for my 2018 F150 remove that? Do I need to remove the rear set of bolts or just the front set?

[@andrewison2194]

Nevermind tapped with a flat head came loose easily

[@superdeleon]

What is install Time?

[@General_DDay]

Is there anyway I could call or send pics to show you what is happening?

[@cjponyparts]

All we can think of is that adjustable heim joint, ReadyLIFT should be able to help you out give them a call if you're still having this issue 877-759-9991

[@seanheyer9515]

What’s the cost of said lift?

[@cjponyparts]

www.cjponyparts.com/readylift-lift-kit-7-inch-with-sst3000-shocks-4wd-f-150-2015-2018/p/442575K/

[@dainburger8862]

Will this work on my 2wd f150

[@matthewrivas7832]

Why would you lift a 2Wd

[@dainburger8862]

@@matthewrivas7832 please tell me why you wouldn’t?

[@JbassPlayer28]

a lift is pretty dumb without an oncrease in suspension travel. a real long travel suspension will eat this for breakfast offroad, lift kits are just for show

[@redneckhillbilly8788]

JbassPlayer28 nah my trucks lifted and I off road all the time what your talking about is not needed and is over kill

[@genevandenham7999]

My truck is a survival/emergency response vehicle. It sees 90% of its time on the road. But has this lift for clearance and the few times we get into sketchy wilderness areas when trying to reach patients. The lift works absolutely great for me.

[@bajamedic]

You lost me a drop bracket

[@simonkirby6064]

Should have gone prerunner build

[@davidh8478]

This is just for show if you're using a 7" strut spacer. That's just ridiculous. Spent all that money on wheels,tires,lighting,graphics,interior and then thru strut spacers at it.....nope! Spend the money and get coilovers.

[@TreyMcmanus]

Does this fit on 2 wheel drive 2020 f150? I installed mine last might but I had to cut the front cross member down and I couldn’t drop the rack n pinion due to the frame being different. Now my tie rods arnt extended enough, what do I do please help