Рет қаралды 1,341
Quick guide on how to be effective with the Air to Ground Radar of the F15E Strike Eagle in DCS World.
Keybinds:
You will find all the listed key binds quickly when you type “Hotas” in the search bar of the controls panel. The information in [ ] is the exact category where you find the key bind, I also try to match this setup when I bind it to my Hotas. The key bind listed have the exact wording like in dcs, so you can copy them to search, the description behind the “-“ is only a explanation and should not be copied .
TDC Slew [Throttle Quadrant, Hotas] - Slew your cursor on the Radar, TGP etc. You can also bind it with axis.
TDC Press [Throttle Quadrant, Hotas] - Perform a cursor action like creating a target point (depends on the selected cursor mode)
Radar Antenna Elevation UP [Throttle Quadrant, Hotas] - Move Antenna up = Radar cone looks further away
Radar Antenna Elevation DOWN [Throttle Quadrant, Hotas] - Move Antenna down = Radar cone comes closer
Castle Switch + Direction [Control Stick, Hotas] - Hold (1-2 sec) long to make the respective MFD SOI (Sensor of Interest), take control of Radar
Auto Acquisition Switch AFT [Throttle Quadrant, Hotas] - Decrease cursor size on RBM
Auto Acquisition Switch FWD [Throttle Quadrant, Hotas] - Increase cursor size on RBM
Auto Acquisition Switch PRESS [Throttle Quadrant, Hotas] - Reject current HRPM and go back to RBM screen
Auto Acquisition Switch AFT [Throttle Quadrant, Hotas] - Toggle PSL when a target point is created with TGT cursor mode
WSO only:
HC Trigger Full Action [Right Hand Controller] - Perform a cursor action like creating a target point (depends on the selected cursor mode)
HC Trigger Half Action + TDC Slew [Right Hand Controller] - Adjust antenna elevation
00:00 Intro
00:36 RDR ON
00:39 Open AG RDR screen
00:49 Open TGP screen
00:53 Take control of AG Radar
01:08 Real Beam Map
01:30 Adjust Antenna elevation
01:41 Adjust displayed range
01:47 Cursormode: MAP
01:57 Adjust Cursor size (Map mode)
02:16 How to move cursor
02:42 Build HR Patch map
03:27 Change cursor mode
03:31 Cursormode “CUE”
03:45 Create target point (cursor mode “TGT”)
03:54 PLS Slew
04:08 Create Mark points (cursor mode “MARK”)
4:16 Return to RBM/Reject HR Patch Map
4:36 HRPM screen details
5:34 RBM screen details
6:47 IGMT integrated ground moving targets
7:09 GMT Ground moving targets
7:38 Have fun
7:53 Outro
#dcs #tutorial #f15e