📌 TIMESTAMPS AND QUESTIONS 00:00 Easy Inserts (4) 1:23 Disconnected Pairs (10) 5:43 Corner in Slot (6) 8:04 Edge in Slot (6) 10:41 Connected Pairs (10) 15:44 Both Pieces in Slot (6) 🚨 Yes I know I messed up some of the visuals (sorry for that) ⁉Should I copy your finger tricks? If you can, yes! That’s why I have the execution for each case at x0.25 speed. However some of the finger tricks might be a bit difficult in the beginning. kzbin.info/www/bejne/gYjIZYaEfrKnqMk ⁉In what order should I learn the cases? You could go through the entire video first to get an idea of what cases exist (and try them on your cube!) But would advise learning one set at a time, in the order of the video. ⁉Are these the best solutions for all cases? Yes and no. All these solutions are great, however there might be algorithms online that make more sense in certain situations. The focus of this video is learning easy to understand solutions, not to memorize algorithms. ⁉For cases with two solutions, which one do I use? You decide! Using the one you prefer works, or you can even alternate between two solutions in your solves. Later in your cubing journey, we’ll see when it makes sense to use different solutions for a case. ⁉ Why do you always rotate to the left when solving pairs? For cases where you need to rotate, I chose to rotate to the left so we could solve the pairs using L/U solutions in a way we’ve already seen. If you’d rotate to the right (and solve the pair into the back), you could solve the pair using R/U solutions, but then you’d need to learn new solutions.
@melkersierra39284 ай бұрын
yo
@VP-gaming76034 ай бұрын
yooo can you do full oll cases instead later
@CubeHead4 ай бұрын
@@VP-gaming7603 sure can! coming next week bro
@BMWGuta4 ай бұрын
@@CubeHead can you do a tutorial on the 2x2 using ortega?
@hamdan198524 ай бұрын
@@CubeHeadyou broke the yooooooooooooooooooooooooooooooooooooo promise 😢😢😢
@chetsobaski91244 ай бұрын
All the other cubers are really good at solving but not as much explaining, finally we have a guy who's good at both. Lets get this man 2 MILLION SUBS!!! Don't yall agree?
@jingleilou46614 ай бұрын
Yeeeeees siiiiiiiiiir
@cicerotobias3 ай бұрын
What about jper
@cicerotobias3 ай бұрын
Jperm
@Lekejnfnfjk2 ай бұрын
@@cicerotobias hell nah
@theonlyeli120Ай бұрын
@@Lekejnfnfjk YESS SIRRRR MATE
@RussianWhales4 ай бұрын
i was looking for a proper f2l cases overview yesterday you just came in time this guy never misses
@a1ex_one2444 ай бұрын
Привет
@nadeeegodage36754 ай бұрын
The feeling is mutual bro
@srikant_naik3 ай бұрын
Disconnected pairs 1:41 2:10 2:44 3:10 3:30 3:56 4:22 4:49 5:08 5:26 Corner in slot 5:49 6:12 6:31 6:48 7:03 7:23 7:40 Edge in slot 1. 8:21 white on top color mismatch 2. 8:50 white on top color match 3. 9:25 White on L side color match 4. 10:10 White on R side color match 5. 10:22 white on L side color mismatch 6. Connected pairs 1.10:52 2. 11:49 3. 12:11 4. 12:40 5. 13:09 6. 13:37 7. 14:03 8. 14:27 9. 14:59 10. 15:28 Both pieces in slot 1. 16:03 2. 16:58 3. 17:17 4. 17:37 5. 17:57
@curiousNic4 ай бұрын
S tier video! You even cover the case no one else is talking about and now I finally know how to solve that.
@CubeHead4 ай бұрын
😂
@hamdan198524 ай бұрын
it's not a S tier video but it's a yoo tier video 😅
@hamdan198524 ай бұрын
@@CubeHeadyo cube head why can't I be a member. it shows me "ur server is not supporting to this server" 😭
@GinafraLobo4 ай бұрын
Yo can u make a Ortega or CLL totruial
@NikolasTheCuber4 ай бұрын
@@hamdan19852 Are you using a VPN?
@flavored_14 ай бұрын
Cube head you probably won’t see this but you’re the best tutor for cubing. I learned beginners method from j perm. I could sorta do f2l from him, but 2 look oll and pll made 0 sense. Later with your vids, I understand perfectly! I even learned full pll from you. Hope I can learn this and full oll too. Just wanted to thank my favorite cubing content creator!😊
@HimeshDx2 ай бұрын
What's the wrong with Jperm's 2 look OLL and PLL?
@edwincollison93172 ай бұрын
Bruh I just went to check his two look OLL and PLL video, I don't see what's wrong with it. But anyway, yeah, this guy is a great explainer. For almost every video, I use both JPerm and CubeHead's videos eg. Planning your First pair and so on
@stardream9664 ай бұрын
you saved me from watching youtube shorts for each case, F2L takes 30 sec now it's just 20-10, this video came in the perfect time, thank you so much !
@CubeHead4 ай бұрын
You are welcome!
@viCuber3 ай бұрын
Solutions I did not yet know (and you might also): 5:45 (I usually did the wide version of the Key Oll. 7:54 8:36 v 10:55 v 12:41 13:33 17:38 For reference, I avarege 14 seconds
@WTF-Cubing4 ай бұрын
My new favourite tutorial vids to share with new Cubers. You’re killing it Milan! 😎
@Zenmthzxqt4 ай бұрын
Cube head is doing the best tutorials I have been cubing for years and this is just way more better than any other video especially he’s explaining and he’s not even English aswell very well done
@CubeHead4 ай бұрын
appreciate it bro!
@edwincollison93172 ай бұрын
Yep, we love you CubeHead❤❤❤
@ferdo42034 ай бұрын
where's the yoooo
@CubeHead4 ай бұрын
next vid! (that's not a tutorial) I promise
@nanamacapagal83424 ай бұрын
@@CubeHead so if i understand correctly, no yooooooooo in the tutorials?
@YT_Crafter4 ай бұрын
I will do it for u cube head😊 on mobile Yoooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooòoooooòooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooòooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo!
@sameenanaz8424 ай бұрын
Really???
@meta91rbx4 ай бұрын
@@YT_CrafterTyy
@luisss19063 ай бұрын
thank you so much, the case at 16:42 i was struggling to find a good alg for it
@drewk59724 ай бұрын
I love your videos and watch the entire thing with no idea what you are really doing but your solves and voice is so soothing. I have very basic knowledge of cubing, nearing a consistent 1min solve but my brain is too small to start doing CFOP and other algorithms lol! Cheers
@CubeHead4 ай бұрын
hahah thanks appreciate it! I bet if you go over the beginner CFOP playlist a couple of times with your cube you'll get it down in no time :)
@ClockSolver4 ай бұрын
i wish i had this when i learnt f2l, so much simpler and straight to the point :)
@CubeHead4 ай бұрын
appreciate it!
@Uminguss3 ай бұрын
idk why im watching this when i use roux
@WILLY-NICX2 ай бұрын
Some people makes the first 2 blocks using the f2l technique
@MandelCuber2 ай бұрын
Cuz Cubehead is Amazing
@TheSSS-v8b2 ай бұрын
🤣
@Uminguss2 ай бұрын
@@WILLY-NICX well that is very inefficient
@tarnthamuaapithorn91612 ай бұрын
O
@sallubah96574 ай бұрын
Wow! I've searching for someone to explain the case that no one talks about. Brother you are a life saver. It's now my fastest solve case. 😂😂 It's never a dull moment watching your contents, keep it up.
@ChewbaccaCuber4 ай бұрын
Okay this is actually really helpful!!🔥🔥🔥
@adriangd50404 ай бұрын
i’m glad there’s people actually teaching 5:49 it’s so good
@eternity_123 ай бұрын
bro this is so helpful, all the other tutorials don't show every single case and the best version on how to solve , I'm just starting to learn CFOP and this very helpful
@TheFastCuberOfficial4 ай бұрын
Finally a good f2l video for me, cubehead is the goat
@TheRealHaxer4 ай бұрын
i average about 40 sec and 20 sec of that is in f2l, this is a huge hep thanks for this video! i will learn all of this algorithms and then tell u how much i average!
@CubeHead4 ай бұрын
Great to hear!
@quintunesp4 ай бұрын
In 6:31 Corner in Slot (6) the example drawing in the bottom the color is wrong in the corner piece, just a minor correction, but great video
@agrimsinha33354 ай бұрын
CubeHead cooked once again as always. Nice video Milan !!
@__btw__abhi4 ай бұрын
I think I am ur biggest fan on KZbin, I learned cube from you , everything about cube, you are such a inspiration to me, really!!! I think I deserve to be pinned …😅
@CubeHead4 ай бұрын
appreciate it bro!
@__btw__abhi4 ай бұрын
OMG the GOAT himself replied for the very first tym 🙏😵
@twentyonebutterflies4 ай бұрын
I just searched f2l tutorials like this and you deliverd at the best time. Thanks bro ❤
@tharangamadhubhashini35294 ай бұрын
Really excited to see your timer
@CubeHead4 ай бұрын
announcing more within a month!
@PhilipJ-c7i2 ай бұрын
14:51 Cubehead = lion CONFIRMED
@CubeS4nT14 ай бұрын
Wow great video I had to learn the harder way back then cubings getting easier and easier because of people like you thank you
@thehandleiwantedwasntavailable10 күн бұрын
I don’t know why I’m watching this when I already know these cases 😂 maybe because I like how your cube sounds when you solve it quickly.
@bananasauce10004 ай бұрын
I was looking for a video like this for a long time, and then my favourite cubing youtuber uploaded it. I will definitely come back here when I forget a case. Thank you so much! edit: the case with both pieces solved is so funny! 😂
@anderscubes4 ай бұрын
This is really helpful for new beginners
@VijaiShyam4 ай бұрын
9:42 : you could actually do U2 R U' R' F R' F' R. Kinda a long solution but i found it more intuitive and easier to execute.
@ClockSolver4 ай бұрын
its actually better lol, however the other one is more intuitive for most beginners
@plextoramericas26292 ай бұрын
just a tip: for the case at 12:51, you can do a y' instead of y and do the insert in the back with r moves anyway thank you for saving me from double rotations
@Nevio_0244 ай бұрын
YESSS! Advanced CFOP incoming! So exited! 🤩🤩
@goldenchocholate4 ай бұрын
Doesnt matter hom many times I watch this video I always leanr from it
@jmtyndall4 ай бұрын
Yooooo, just last night while practicing cubing I thought to myself, "self, maybe you need learn more advanced f2l to get faster." And then you posted this video like a mind reader.
@Harnoor_Singh860Ай бұрын
I don't have a speedcube but with the help of you I solve every F2L in 2 seconds
@TedBonkers4 ай бұрын
even though i can solve the cube in 10 seconds, i still learnt something, 16:42 it never occurred to me that you can do that
@edwincollison93172 ай бұрын
Man, CubeHead is so fast his moves in slow-mo sound like lightning 😂😂😂
@darshyadav34882 ай бұрын
All it took was 20 minutes for me to learn f2l , great video !
@EpicCool-ih5yj4 ай бұрын
5:48 sledge insert has changed my life
@kori22819 күн бұрын
oh wow 5 min in and already realized how horrible my alg was. that "hide in the back" thing is way more efficient than what I was doing: 1) I was aligning the edge to the color, inserting it inverted, aligning the block, pulling the block back out, U2, then sledging it in 2) I was aligning the edge to the non-matching color of that pair, inserting it so it aligns to the faces, align the corner so the block is inverted, pull it back to the back, U2 to the front, reinsert the edge so it breaks the corner, U/U' return the corner so the white , pull the edge out to the back [forms the block with the corner], then U2 insert 2b) just realized a simplification of 2) as I was typing this: after aligning the corner so the block is inverted, just (L' U L U')x4 U' insert (to left side) | (R U' R' U)x4 U insert (to right side) 3) realized another simplification: after aligning corner so the block is inverted, regrip and sexy move 3 times (without needing the final U/U') 2c) just realized another simplification combining 2a and 2b: pull out to back, U2, (L' U L U')x2 U insert (to left side) | (R U' R' U)x2 U' insert (to right side)
@penguiniamc3 ай бұрын
dude, ive been looking for a tutorial as good as if not better than cubeorithms tutorial, and finally found one, thanks! also big fan of
@Enderbeast7official4 ай бұрын
I can't wake up unless I watch cubehead
@cubix_rubrr4 ай бұрын
You killed it! I love your tutorials!
@ZhaiPhifer4 ай бұрын
I wish I learned f2l so much sooner. Also I improved some of my cases l thanks CubeHead.
@Ice-Wing4 ай бұрын
You are the true successor of jperm, keep going!
@simonk70954 ай бұрын
Thankyou cubehead. I’ve been waiting for this one!
@Who_asked1924 ай бұрын
I am not a beginner but i sat through the whole 16 minutes
@FostCubes4 ай бұрын
really loving these tutorials cubehead!
@CubeHead4 ай бұрын
thank you!
@aryanarjun4334 ай бұрын
I just got sub 30 and realized that my f2l is so inefficient and slow and then the next day CUBEHEAD does this:
@Ronaldo-it7cw3 ай бұрын
thank you so much cubehead i can easily learn f2l now
@TheEelVR3 ай бұрын
Bro I finally can average 1 minute :D thank you for this amazing tutorial! Crushed it once again!
@Spiritual10-422 ай бұрын
I’m sub 20, straight after this vid I got 8.06s……(pll skip) thx bro
@danishsyazmanbinstirmanmoe82944 ай бұрын
My f2l suck and you saved me im glad that i found this channel
@DartaMaule4 ай бұрын
The best f2l video for last 2024 years
@elonboone50614 ай бұрын
Cubehead, you’ve been so helpful in my journey of cubing, and I appreciate you a lot . I can’t wait to buy your new v2 as soon as I’m able too 😂.
@jamiehorner25953 ай бұрын
at 7:50 the case doesnt match whats in the bottom left corner also, top tier vid its helping me a lot. Edit: the color of the corner is the same as the top of the edge, not different like on your cube.
@SpeedCuber20164 ай бұрын
I noticed the cube graphics you put from 6:32-8:04 were incorrect for what you are doing. Thought you should know 👍🏼
@someonetrustme1614 ай бұрын
even if i have already quit cubing since jan 2024, i still click on these since ur such a fun guy to watch :D edited for grammer
@SlimSim564 ай бұрын
I thought this was the video I was waiting for. But then I realized there’s only a couple of cases you showed that I do differently. I do a lot more sledge inserts though. Also I thought it was bad to rotate while doing an f2l pair. Like in the middle of the alg I mean. Overall I think it’s a really nice video and will really help a lot of people. Thanks Cubehead!
@CubeHead4 ай бұрын
Rotating isn’t always bad, sometimes it makes going to your next pairs easier :)
@antjehansma13694 ай бұрын
Nice vid i was looking for this
@ZippyRoblox_2 ай бұрын
16:42 i hate this case ty for the alg
@vaughnp39134 ай бұрын
The graphics in the bottom left corner are miscolored at 7:31 and 7:41. Besides that - thank you so much for this great f2l tutorial!
@curtjustinekho62424 ай бұрын
I didn't Notice I've been doing some intuitive F2l 😂😂😂, Excellent tutorial Cubehead.
@Rickistheking4 ай бұрын
Such a good tutorial already broke my pb right after watching the video (it was an 11 second solve and I am avraging about 20 seconds)
@oshmithroy4 ай бұрын
This guy has taught me way too much, thank you.
@faraazuddinmohammed20212 ай бұрын
Bro your explanation is too good ❤❤
@madescr3 ай бұрын
Great vid! only thing is at 11:42 the R is supposed to be R'
@CubeHead3 ай бұрын
Oh damn you’re right
@BenjaminTheSpeedcuber4 ай бұрын
keep up with the great CFOP content, will be waiting for more vids!
@craberverydumb4 ай бұрын
omg i've been waiting for this video for soooooooo long
@Chicken.3 ай бұрын
Could you post a list of the algorithms that you use?
@seyarnoori40554 ай бұрын
Love you Bro❤ The best cubing channel in the world love you from Afghanistan❤🇦🇫
@13Graham4 ай бұрын
11:40 my instincts kicked in when I saw that red-green pair
@reallyfurious2 ай бұрын
Ok this is what I'm looking for... Ive decided to go from doing the basic, intuitive, layer by layer method with very few algorithms to remember to doing a quicker method to try and get my average to under 1 minute. I don't know why im struggling with the F2L corner + edge matching 🤔
@cubingbox4 ай бұрын
Wauw cubehead deze tutorials zijn echt goed
@ameer_gaming43423 ай бұрын
At 16:5 there's another solution ( Sledge ) R U' R' ( R U' R' ) U2 ( INSERT) Its easier in my opinion
@PranavAddala4 ай бұрын
Thanks so much cube head, this is exactly what i need!
@musicbeat5624 ай бұрын
full advance f2l video pleasee
@Slicee_4 ай бұрын
Milan is the goat broo ur vids are supper good and I enjoy them and ur naturally funny aswell❤️🗿🐐🐐
@Mitsunee_4 ай бұрын
I really need to remember the cases where sledge is useful, some of those I currently consider bad cases when they apparently don't have to be
@yourweso4 ай бұрын
love you bro
@svcubes55164 ай бұрын
Thank for all of this you are the my favorite cubing KZbinr keep it up and you could get to 2 million subscribers soon
@jingleilou46614 ай бұрын
Iv’e been waiting for a video like this for a loooooong time, cause I didn’t want to painstakingly memorize all 42 cases. Maybe you could next time do intuitive lol and pll
@thinuserasmus23134 ай бұрын
leEEEZSS GOOO CUBE HEAD FINALY START UOLOADING AGAIN
@andrewburianto37414 ай бұрын
Omgg, I average 10-12 and there r still some that idkk😂
@Zain_tolba4 ай бұрын
I am so glad you didn’t quit But you said you’d upload on the other chalenge
@rooseveltpadilha15114 ай бұрын
Awesome video!!! Perfect! thank u so much!
@RajiniBabu-z3u2 ай бұрын
Thanx this is fire 🔥🔥🔥
@a-o-s4 ай бұрын
I would do anything to see a graph of GLOBAL average times for 3x3 / 3x3 F2L. I'd look for like the month that follows this and expect to see like a little dip, nice vid.
@fedwards64 ай бұрын
For the connected pairs, the annoying case you can just do a sune 14:57
@ClockSolver4 ай бұрын
it is 1 move shorter, but has 2 double turns, so standard solution is still better
@bopanda43484 ай бұрын
I am now beginnig learning f2l this video came perfect timing
@happygamer7874 ай бұрын
An alternative alg for 10:20 is U2 (R' F R F') U2 (R U R') if you dont really like the F moves.
@ClockSolver4 ай бұрын
yeah, its better but not as intuitive, i do use it when i already looked ahead to it
@Art0r1aS-zp3wh4 ай бұрын
Thank you so much for the tutorial Milan. Can you also do an advanced cross tutorial:)
@edwincollison93172 ай бұрын
Bruh, the F2L noe one talks about has the most funniest solution 😂😂😂
@firepotato57774 ай бұрын
another great video by the one and only cubehead
@firepotato57774 ай бұрын
thanks for liking this comment now I get to flex to my family that the best youtuber on earth liked my comment.